McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 19

Question 180

At fictional Timberline Operations, a network engineer supporting production campuses is reviewing Huawei network security and VPN isolation during a lab-to-production acceptance (HCIP-H12-821-SECURITY-045). The observed network issue is: A Huawei firewall blocks a legitimate return packet even though the initiating client request was allowed by a separate ACL. Which ongoing preventive or detective control would best reduce recurrence?

  1. Disable unneeded insecure management services during baseline hardening.
  2. Run source-to-destination route and capture tests after changing VPN profiles.
  3. Include bidirectional session and asymmetric-route checks in firewall changes.
  4. Review account ownership and eliminate default access during commissioning.

Explanation

Correct Answer

C:

The preventive or detective safeguard is: Include bidirectional session and asymmetric-route checks in firewall changes. This directly addresses the recurring fault: A Huawei firewall blocks a legitimate return packet even though the initiating client request was allowed by a separate ACL. The corrective action would be: Examine stateful session creation, route symmetry and security policies instead of assuming stateless ACL behavior. Success is demonstrated when: An established authorized conversation has the expected state entry and response traffic succeeds.

Incorrect Answers

A:

“Disable unneeded insecure management services during baseline hardening” addresses recurrence of another problem: A router uses telnet for administration across an untrusted network and the team assumes its device password makes sessions confidential. That problem depends on: The preventive or detective safeguard is: Disable unneeded insecure management services during baseline hardening. The recurring risk here is: A Huawei firewall blocks a legitimate return packet even though the initiating client request was allowed by a separate ACL. The more targeted safeguard is “Include bidirectional session and asymmetric-route checks in firewall changes” because the preventive or detective safeguard is: Include bidirectional session and asymmetric-route checks in firewall changes.

B:

“Run source-to-destination route and capture tests after changing VPN profiles” addresses recurrence of another problem: A remote-access VPN sends sensitive traffic outside the encrypted tunnel because split-tunnel destinations were omitted. That problem depends on: The preventive or detective safeguard is: Run source-to-destination route and capture tests after changing VPN profiles. The recurring risk here is: A Huawei firewall blocks a legitimate return packet even though the initiating client request was allowed by a separate ACL. The more targeted safeguard is “Include bidirectional session and asymmetric-route checks in firewall changes” because the preventive or detective safeguard is: Include bidirectional session and asymmetric-route checks in firewall changes.

D:

“Review account ownership and eliminate default access during commissioning” addresses recurrence of another problem: A Huawei router has default admin credentials on a remotely reachable service and a technician treats protocol encryption as sufficient. That problem depends on: The preventive or detective safeguard is: Review account ownership and eliminate default access during commissioning. The recurring risk here is: A Huawei firewall blocks a legitimate return packet even though the initiating client request was allowed by a separate ACL. The more targeted safeguard is “Include bidirectional session and asymmetric-route checks in firewall changes” because the preventive or detective safeguard is: Include bidirectional session and asymmetric-route checks in firewall changes.

Question 181

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing BGP routing, path attributes and EVPN exchange during a new network integration (HCIP-H12-821-BGP-046). The observed network issue is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. Which next engineering action best addresses the reported problem?

  1. Verify and permit authorized BGP TCP transport in both directions without exposing unrelated services.
  2. Ensure the reflected next-hop design is routable or apply justified next-hop policy at the correct boundary.
  3. Narrow permitted prefix filters to the approved route set and confirm the aggregate's precise prefix length.
  4. Inspect higher-priority route-selection attributes and local import policy before relying on AS_PATH.

Explanation

Correct Answer

D:

The directly responsive action is: Inspect higher-priority route-selection attributes and local import policy before relying on AS_PATH. The specific reported fault is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. Confirmation should show: The selected best route matches the configured policy and subsequent AS_PATH comparison. The supporting technical principle is: BGP path attributes are compared in an ordered selection process, not by AS_PATH alone.

Incorrect Answers

A:

“Verify and permit authorized BGP TCP transport in both directions without exposing unrelated services” responds to another technical or business failure: A border router can ping an eBGP peer yet session establishment fails because firewall ACL blocks TCP port 179. That source case depends on: IP reachability alone does not imply that BGP TCP transport is permitted. The present issue is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. The more direct action is “Inspect higher-priority route-selection attributes and local import policy before relying on AS_PATH” because BGP path attributes are compared in an ordered selection process, not by AS_PATH alone.

B:

“Ensure the reflected next-hop design is routable or apply justified next-hop policy at the correct boundary” responds to another technical or business failure: A route reflector receives a new external prefix but its clients cannot use the route because the advertised next hop is unreachable. That source case depends on: Route reflection distributes BGP paths but does not automatically repair next-hop reachability. The present issue is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. The more direct action is “Inspect higher-priority route-selection attributes and local import policy before relying on AS_PATH” because BGP path attributes are compared in an ordered selection process, not by AS_PATH alone.

C:

“Narrow permitted prefix filters to the approved route set and confirm the aggregate's precise prefix length” responds to another technical or business failure: An administrator applies an export prefix list at the BGP border but mistakenly filters all networks including a critical aggregate. That source case depends on: BGP outbound prefix filtering controls which NLRI are advertised to external peers. The present issue is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. The more direct action is “Inspect higher-priority route-selection attributes and local import policy before relying on AS_PATH” because BGP path attributes are compared in an ordered selection process, not by AS_PATH alone.

Question 182

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing BGP routing, path attributes and EVPN exchange during a new network integration (HCIP-H12-821-BGP-046). The observed network issue is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. Which ongoing preventive or detective control would best reduce recurrence?

  1. Include loopback and transit TTL checks for nonadjacent BGP neighbors.
  2. Validate both reflected path visibility and next-hop recursion on clients.
  3. Record the relevant best-path comparison attributes in route-change reviews.
  4. Record BGP state transitions and transport errors in new-neighbor tests.

Explanation

Correct Answer

C:

The preventive or detective safeguard is: Record the relevant best-path comparison attributes in route-change reviews. This directly addresses the recurring fault: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. The corrective action would be: Inspect higher-priority route-selection attributes and local import policy before relying on AS_PATH. Success is demonstrated when: The selected best route matches the configured policy and subsequent AS_PATH comparison.

Incorrect Answers

A:

“Include loopback and transit TTL checks for nonadjacent BGP neighbors” addresses recurrence of another problem: Two eBGP routers attempt to peer over loopback addresses separated by several transit hops using the default one-hop behavior. That problem depends on: The preventive or detective safeguard is: Include loopback and transit TTL checks for nonadjacent BGP neighbors. The recurring risk here is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. The more targeted safeguard is “Record the relevant best-path comparison attributes in route-change reviews” because the preventive or detective safeguard is: Record the relevant best-path comparison attributes in route-change reviews.

B:

“Validate both reflected path visibility and next-hop recursion on clients” addresses recurrence of another problem: A route reflector receives a new external prefix but its clients cannot use the route because the advertised next hop is unreachable. That problem depends on: The preventive or detective safeguard is: Validate both reflected path visibility and next-hop recursion on clients. The recurring risk here is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. The more targeted safeguard is “Record the relevant best-path comparison attributes in route-change reviews” because the preventive or detective safeguard is: Record the relevant best-path comparison attributes in route-change reviews.

D:

“Record BGP state transitions and transport errors in new-neighbor tests” addresses recurrence of another problem: BGP stays in Idle after a new neighbor is configured and operators troubleshoot route policies instead of local interface reachability. That problem depends on: The preventive or detective safeguard is: Record BGP state transitions and transport errors in new-neighbor tests. The recurring risk here is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. The more targeted safeguard is “Record the relevant best-path comparison attributes in route-change reviews” because the preventive or detective safeguard is: Record the relevant best-path comparison attributes in route-change reviews.

Question 183

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing BGP routing, path attributes and EVPN exchange during a new network integration (HCIP-H12-821-BGP-046). The observed network issue is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. Which routing, switching, or network principle best explains the appropriate solution?

  1. BGP ORIGINATOR_ID is a loop-prevention mechanism in reflected routing.
  2. BGP FSM states distinguish session formation failures from routing-update processing.
  3. EVPN route distinguishers and route targets serve different functions.
  4. BGP path attributes are compared in an ordered selection process, not by AS_PATH alone.

Explanation

Correct Answer

D:

The governing principle is: BGP path attributes are compared in an ordered selection process, not by AS_PATH alone. In this scenario, the appropriate action is: Inspect higher-priority route-selection attributes and local import policy before relying on AS_PATH. Valid evidence would show: The selected best route matches the configured policy and subsequent AS_PATH comparison.

Incorrect Answers

A:

“BGP ORIGINATOR_ID is a loop-prevention mechanism in reflected routing” responds to another technical or business failure: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. That source case depends on: BGP ORIGINATOR_ID is a loop-prevention mechanism in reflected routing. The present issue is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. The more direct action is “BGP path attributes are compared in an ordered selection process, not by AS_PATH alone” because BGP path attributes are compared in an ordered selection process, not by AS_PATH alone.

B:

“BGP FSM states distinguish session formation failures from routing-update processing” responds to another technical or business failure: BGP stays in Idle after a new neighbor is configured and operators troubleshoot route policies instead of local interface reachability. That source case depends on: BGP FSM states distinguish session formation failures from routing-update processing. The present issue is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. The more direct action is “BGP path attributes are compared in an ordered selection process, not by AS_PATH alone” because BGP path attributes are compared in an ordered selection process, not by AS_PATH alone.

C:

“EVPN route distinguishers and route targets serve different functions” responds to another technical or business failure: A network architect uses an EVPN route distinguisher expecting it to automatically control which VPNs import the route. That source case depends on: EVPN route distinguishers and route targets serve different functions. The present issue is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. The more direct action is “BGP path attributes are compared in an ordered selection process, not by AS_PATH alone” because BGP path attributes are compared in an ordered selection process, not by AS_PATH alone.

Question 184

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing BGP routing, path attributes and EVPN exchange during a new network integration (HCIP-H12-821-BGP-046). The observed network issue is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. Which observation most directly verifies that the corrective change succeeded?

  1. Internal routers select the higher intended local-preference path while keeping next-hop reachability.
  2. Both routers reach Established using the planned loopback source and destination.
  3. The multihop eBGP session reaches Established while the control path follows approved routing.
  4. The selected best route matches the configured policy and subsequent AS_PATH comparison.

Explanation

Correct Answer

D:

The best verification observation is: The selected best route matches the configured policy and subsequent AS_PATH comparison. It demonstrates the corrective action: Inspect higher-priority route-selection attributes and local import policy before relying on AS_PATH. This fits the principle: BGP path attributes are compared in an ordered selection process, not by AS_PATH alone. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Internal routers select the higher intended local-preference path while keeping next-hop reachability” responds to another technical or business failure: Two external BGP exits learn the same remote prefix and a company needs consistent outbound preference inside the AS. That source case depends on: The best verification observation is: Internal routers select the higher intended local-preference path while keeping next-hop reachability. The present issue is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. The more direct action is “The selected best route matches the configured policy and subsequent AS_PATH comparison” because the best verification observation is: The selected best route matches the configured policy and subsequent AS_PATH comparison.

B:

“Both routers reach Established using the planned loopback source and destination” responds to another technical or business failure: An iBGP adjacency to peer loopbacks fails because one side sends TCP from the physical interface address. That source case depends on: The best verification observation is: Both routers reach Established using the planned loopback source and destination. The present issue is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. The more direct action is “The selected best route matches the configured policy and subsequent AS_PATH comparison” because the best verification observation is: The selected best route matches the configured policy and subsequent AS_PATH comparison.

C:

“The multihop eBGP session reaches Established while the control path follows approved routing” responds to another technical or business failure: Two eBGP routers attempt to peer over loopback addresses separated by several transit hops using the default one-hop behavior. That source case depends on: The best verification observation is: The multihop eBGP session reaches Established while the control path follows approved routing. The present issue is: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. The more direct action is “The selected best route matches the configured policy and subsequent AS_PATH comparison” because the best verification observation is: The selected best route matches the configured policy and subsequent AS_PATH comparison.

Question 185

At fictional Zenith Cloudworks, a network engineer supporting data center interconnects is reviewing IGMP and PIM multicast distribution during a controlled failover exercise (HCIP-H12-821-MULTICAST-047). The observed network issue is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. Which ongoing preventive or detective control would best reduce recurrence?

  1. Validate snooping memberships after each VLAN access change.
  2. Verify RP mappings and unicast reachability in every multicast VRF.
  3. Trace multicast forwarding state hop by hop during branch onboarding.
  4. Test group join and leave handling with controlled receivers.

Explanation

Correct Answer

B:

The preventive or detective safeguard is: Verify RP mappings and unicast reachability in every multicast VRF. This directly addresses the recurring fault: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. The corrective action would be: Configure reachable and consistent RP mapping for the multicast group range. Success is demonstrated when: Receivers build valid PIM-SM join state toward the intended rendezvous point.

Incorrect Answers

A:

“Validate snooping memberships after each VLAN access change” addresses recurrence of another problem: A receiver sends IGMP membership reports but the local VLAN switch floods the multicast group to every port. That problem depends on: The preventive or detective safeguard is: Validate snooping memberships after each VLAN access change. The recurring risk here is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. The more targeted safeguard is “Verify RP mappings and unicast reachability in every multicast VRF” because the preventive or detective safeguard is: Verify RP mappings and unicast reachability in every multicast VRF.

C:

“Trace multicast forwarding state hop by hop during branch onboarding” addresses recurrence of another problem: A multicast receiver has IGMP state locally but the PIM upstream interface is disabled. That problem depends on: The preventive or detective safeguard is: Trace multicast forwarding state hop by hop during branch onboarding. The recurring risk here is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. The more targeted safeguard is “Verify RP mappings and unicast reachability in every multicast VRF” because the preventive or detective safeguard is: Verify RP mappings and unicast reachability in every multicast VRF.

D:

“Test group join and leave handling with controlled receivers” addresses recurrence of another problem: An IGMPv2 receiver leaves a group but the switch continues forwarding the stream indefinitely. That problem depends on: The preventive or detective safeguard is: Test group join and leave handling with controlled receivers. The recurring risk here is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. The more targeted safeguard is “Verify RP mappings and unicast reachability in every multicast VRF” because the preventive or detective safeguard is: Verify RP mappings and unicast reachability in every multicast VRF.

Question 186

At fictional Zenith Cloudworks, a network engineer supporting data center interconnects is reviewing IGMP and PIM multicast distribution during a controlled failover exercise (HCIP-H12-821-MULTICAST-047). The observed network issue is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. Which routing, switching, or network principle best explains the appropriate solution?

  1. Shared-tree PIM-SM discovery depends on appropriate RP reachability.
  2. IGMP uses membership queries and reports to maintain receiver state.
  3. A working multicast stream requires valid ingress RPF and interested downstream forwarding interfaces.
  4. IGMPv3 adds source filtering required for source-specific multicast operation.

Explanation

Correct Answer

A:

The governing principle is: Shared-tree PIM-SM discovery depends on appropriate RP reachability. In this scenario, the appropriate action is: Configure reachable and consistent RP mapping for the multicast group range. Valid evidence would show: Receivers build valid PIM-SM join state toward the intended rendezvous point.

Incorrect Answers

B:

“IGMP uses membership queries and reports to maintain receiver state” responds to another technical or business failure: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. That source case depends on: IGMP uses membership queries and reports to maintain receiver state. The present issue is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. The more direct action is “Shared-tree PIM-SM discovery depends on appropriate RP reachability” because Shared-tree PIM-SM discovery depends on appropriate RP reachability.

C:

“A working multicast stream requires valid ingress RPF and interested downstream forwarding interfaces” responds to another technical or business failure: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. That source case depends on: A working multicast stream requires valid ingress RPF and interested downstream forwarding interfaces. The present issue is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. The more direct action is “Shared-tree PIM-SM discovery depends on appropriate RP reachability” because Shared-tree PIM-SM discovery depends on appropriate RP reachability.

D:

“IGMPv3 adds source filtering required for source-specific multicast operation” responds to another technical or business failure: A network expects IGMPv3 source-specific filtering but uses routers configured only for IGMPv2. That source case depends on: IGMPv3 adds source filtering required for source-specific multicast operation. The present issue is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. The more direct action is “Shared-tree PIM-SM discovery depends on appropriate RP reachability” because Shared-tree PIM-SM discovery depends on appropriate RP reachability.

Question 187

At fictional Zenith Cloudworks, a network engineer supporting data center interconnects is reviewing IGMP and PIM multicast distribution during a controlled failover exercise (HCIP-H12-821-MULTICAST-047). The observed network issue is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. Which observation most directly verifies that the corrective change succeeded?

  1. The receiver joins only the intended source-group stream under IGMPv3.
  2. Only intended receivers for each service group see the correct media flow.
  3. PIM neighbor and forwarding states are present along the route to the source or RP.
  4. Receivers build valid PIM-SM join state toward the intended rendezvous point.

Explanation

Correct Answer

D:

The best verification observation is: Receivers build valid PIM-SM join state toward the intended rendezvous point. It demonstrates the corrective action: Configure reachable and consistent RP mapping for the multicast group range. This fits the principle: Shared-tree PIM-SM discovery depends on appropriate RP reachability. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“The receiver joins only the intended source-group stream under IGMPv3” responds to another technical or business failure: A network expects IGMPv3 source-specific filtering but uses routers configured only for IGMPv2. That source case depends on: The best verification observation is: The receiver joins only the intended source-group stream under IGMPv3. The present issue is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. The more direct action is “Receivers build valid PIM-SM join state toward the intended rendezvous point” because the best verification observation is: Receivers build valid PIM-SM join state toward the intended rendezvous point.

B:

“Only intended receivers for each service group see the correct media flow” responds to another technical or business failure: Multicast packets arrive at the wrong group because the sender application uses a group address overlapping another service. That source case depends on: The best verification observation is: Only intended receivers for each service group see the correct media flow. The present issue is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. The more direct action is “Receivers build valid PIM-SM join state toward the intended rendezvous point” because the best verification observation is: Receivers build valid PIM-SM join state toward the intended rendezvous point.

C:

“PIM neighbor and forwarding states are present along the route to the source or RP” responds to another technical or business failure: A multicast receiver has IGMP state locally but the PIM upstream interface is disabled. That source case depends on: The best verification observation is: PIM neighbor and forwarding states are present along the route to the source or RP. The present issue is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. The more direct action is “Receivers build valid PIM-SM join state toward the intended rendezvous point” because the best verification observation is: Receivers build valid PIM-SM join state toward the intended rendezvous point.

Question 188

At fictional Zenith Cloudworks, a network engineer supporting data center interconnects is reviewing IGMP and PIM multicast distribution during a controlled failover exercise (HCIP-H12-821-MULTICAST-047). The observed network issue is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. Which next engineering action best addresses the reported problem?

  1. Repair downstream membership state and correct PIM prune propagation.
  2. Align IGMP version support and receiver source-filtering expectations.
  3. Configure reachable and consistent RP mapping for the multicast group range.
  4. Check reverse path to the source and verify supported SPT switching behavior.

Explanation

Correct Answer

C:

The directly responsive action is: Configure reachable and consistent RP mapping for the multicast group range. The specific reported fault is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. Confirmation should show: Receivers build valid PIM-SM join state toward the intended rendezvous point. The supporting technical principle is: Shared-tree PIM-SM discovery depends on appropriate RP reachability.

Incorrect Answers

A:

“Repair downstream membership state and correct PIM prune propagation” responds to another technical or business failure: An upstream router continuously forwards multicast after a branch has no receivers because PIM prune information is missing. That source case depends on: PIM forwarding state should track downstream interest and prune unused paths. The present issue is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. The more direct action is “Configure reachable and consistent RP mapping for the multicast group range” because Shared-tree PIM-SM discovery depends on appropriate RP reachability.

B:

“Align IGMP version support and receiver source-filtering expectations” responds to another technical or business failure: A network expects IGMPv3 source-specific filtering but uses routers configured only for IGMPv2. That source case depends on: IGMPv3 adds source filtering required for source-specific multicast operation. The present issue is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. The more direct action is “Configure reachable and consistent RP mapping for the multicast group range” because Shared-tree PIM-SM discovery depends on appropriate RP reachability.

D:

“Check reverse path to the source and verify supported SPT switching behavior” responds to another technical or business failure: A PIM-SM router cannot switch efficiently to a shortest-path tree because its source route points through another neighbor. That source case depends on: PIM-SM can transition from an RP shared tree to a source-specific shortest-path tree. The present issue is: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. The more direct action is “Configure reachable and consistent RP mapping for the multicast group range” because Shared-tree PIM-SM discovery depends on appropriate RP reachability.

Question 189

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing RSTP, MSTP and switching interconnects during a post-maintenance incident review (HCIP-H12-821-SWITCH-048). The observed network issue is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. Which next engineering action best addresses the reported problem?

  1. Align stack member identities, link topology and compatible software and hardware requirements.
  2. Set deliberate bridge priority and verify the elected root and port roles across the VLAN.
  3. Enable appropriate RSTP or MSTP protection and inspect the loop-free forwarding topology.
  4. Inspect effective port costs, bridge IDs and region boundaries before adjusting designated links.

Explanation

Correct Answer

B:

The directly responsive action is: Set deliberate bridge priority and verify the elected root and port roles across the VLAN. The specific reported fault is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. Confirmation should show: The selected distribution bridge is root and redundant ports show expected roles. The supporting technical principle is: STP root election uses bridge identifier priorities and MAC tie-breaking.

Incorrect Answers

A:

“Align stack member identities, link topology and compatible software and hardware requirements” responds to another technical or business failure: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. That source case depends on: Switch stacking creates a logical control relationship from compatible physical members. The present issue is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The more direct action is “Set deliberate bridge priority and verify the elected root and port roles across the VLAN” because STP root election uses bridge identifier priorities and MAC tie-breaking.

C:

“Enable appropriate RSTP or MSTP protection and inspect the loop-free forwarding topology” responds to another technical or business failure: An Ethernet campus has a physical loop but engineers disable spanning tree to reduce convergence delay. That source case depends on: Spanning tree prevents layer-2 loops while retaining redundant physical links. The present issue is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The more direct action is “Set deliberate bridge priority and verify the elected root and port roles across the VLAN” because STP root election uses bridge identifier priorities and MAC tie-breaking.

D:

“Inspect effective port costs, bridge IDs and region boundaries before adjusting designated links” responds to another technical or business failure: A switch link that should be an MST root port instead alternates forwarding because path costs differ from the planned design. That source case depends on: Spanning-tree selected paths depend on cumulative root cost and bridge identifiers. The present issue is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The more direct action is “Set deliberate bridge priority and verify the elected root and port roles across the VLAN” because STP root election uses bridge identifier priorities and MAC tie-breaking.

Question 190

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing RSTP, MSTP and switching interconnects during a post-maintenance incident review (HCIP-H12-821-SWITCH-048). The observed network issue is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. Which ongoing preventive or detective control would best reduce recurrence?

  1. Validate stack member IDs and interconnect cabling before joining production.
  2. Run region consistency checks after any VLAN migration.
  3. Test VLAN loop avoidance and default gateway failover separately.
  4. Document root-primary and backup priorities for all switching domains.

Explanation

Correct Answer

D:

The preventive or detective safeguard is: Document root-primary and backup priorities for all switching domains. This directly addresses the recurring fault: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The corrective action would be: Set deliberate bridge priority and verify the elected root and port roles across the VLAN. Success is demonstrated when: The selected distribution bridge is root and redundant ports show expected roles.

Incorrect Answers

A:

“Validate stack member IDs and interconnect cabling before joining production” addresses recurrence of another problem: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. That problem depends on: The preventive or detective safeguard is: Validate stack member IDs and interconnect cabling before joining production. The recurring risk here is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The more targeted safeguard is “Document root-primary and backup priorities for all switching domains” because the preventive or detective safeguard is: Document root-primary and backup priorities for all switching domains.

B:

“Run region consistency checks after any VLAN migration” addresses recurrence of another problem: MSTP neighbors appear in different regions despite using the same region name because their VLAN mappings differ. That problem depends on: The preventive or detective safeguard is: Run region consistency checks after any VLAN migration. The recurring risk here is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The more targeted safeguard is “Document root-primary and backup priorities for all switching domains” because the preventive or detective safeguard is: Document root-primary and backup priorities for all switching domains.

C:

“Test VLAN loop avoidance and default gateway failover separately” addresses recurrence of another problem: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. That problem depends on: The preventive or detective safeguard is: Test VLAN loop avoidance and default gateway failover separately. The recurring risk here is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The more targeted safeguard is “Document root-primary and backup priorities for all switching domains” because the preventive or detective safeguard is: Document root-primary and backup priorities for all switching domains.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests