McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 20

Question 190

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing RSTP, MSTP and switching interconnects during a post-maintenance incident review (HCIP-H12-821-SWITCH-048). The observed network issue is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. Which ongoing preventive or detective control would best reduce recurrence?

  1. Validate stack member IDs and interconnect cabling before joining production.
  2. Run region consistency checks after any VLAN migration.
  3. Test VLAN loop avoidance and default gateway failover separately.
  4. Document root-primary and backup priorities for all switching domains.

Explanation

Correct Answer

D:

The preventive or detective safeguard is: Document root-primary and backup priorities for all switching domains. This directly addresses the recurring fault: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The corrective action would be: Set deliberate bridge priority and verify the elected root and port roles across the VLAN. Success is demonstrated when: The selected distribution bridge is root and redundant ports show expected roles.

Incorrect Answers

A:

“Validate stack member IDs and interconnect cabling before joining production” addresses recurrence of another problem: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. That problem depends on: The preventive or detective safeguard is: Validate stack member IDs and interconnect cabling before joining production. The recurring risk here is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The more targeted safeguard is “Document root-primary and backup priorities for all switching domains” because the preventive or detective safeguard is: Document root-primary and backup priorities for all switching domains.

B:

“Run region consistency checks after any VLAN migration” addresses recurrence of another problem: MSTP neighbors appear in different regions despite using the same region name because their VLAN mappings differ. That problem depends on: The preventive or detective safeguard is: Run region consistency checks after any VLAN migration. The recurring risk here is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The more targeted safeguard is “Document root-primary and backup priorities for all switching domains” because the preventive or detective safeguard is: Document root-primary and backup priorities for all switching domains.

C:

“Test VLAN loop avoidance and default gateway failover separately” addresses recurrence of another problem: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. That problem depends on: The preventive or detective safeguard is: Test VLAN loop avoidance and default gateway failover separately. The recurring risk here is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The more targeted safeguard is “Document root-primary and backup priorities for all switching domains” because the preventive or detective safeguard is: Document root-primary and backup priorities for all switching domains.

Question 191

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing RSTP, MSTP and switching interconnects during a post-maintenance incident review (HCIP-H12-821-SWITCH-048). The observed network issue is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. Which observation most directly verifies that the corrective change succeeded?

  1. MST configuration digests agree and switches join the intended common region.
  2. The trunk participates in correct RSTP convergence and risky edge behavior is blocked.
  3. Layer-2 forwarding and the layer-3 active gateway each follow their own intended owner.
  4. The selected distribution bridge is root and redundant ports show expected roles.

Explanation

Correct Answer

D:

The best verification observation is: The selected distribution bridge is root and redundant ports show expected roles. It demonstrates the corrective action: Set deliberate bridge priority and verify the elected root and port roles across the VLAN. This fits the principle: STP root election uses bridge identifier priorities and MAC tie-breaking. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“MST configuration digests agree and switches join the intended common region” responds to another technical or business failure: MSTP neighbors appear in different regions despite using the same region name because their VLAN mappings differ. That source case depends on: The best verification observation is: MST configuration digests agree and switches join the intended common region. The present issue is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The more direct action is “The selected distribution bridge is root and redundant ports show expected roles” because the best verification observation is: The selected distribution bridge is root and redundant ports show expected roles.

B:

“The trunk participates in correct RSTP convergence and risky edge behavior is blocked” responds to another technical or business failure: An engineer places an edge-port setting on a trunk toward another switch and an unexpected BPDU enters the network. That source case depends on: The best verification observation is: The trunk participates in correct RSTP convergence and risky edge behavior is blocked. The present issue is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The more direct action is “The selected distribution bridge is root and redundant ports show expected roles” because the best verification observation is: The selected distribution bridge is root and redundant ports show expected roles.

C:

“Layer-2 forwarding and the layer-3 active gateway each follow their own intended owner” responds to another technical or business failure: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. That source case depends on: The best verification observation is: Layer-2 forwarding and the layer-3 active gateway each follow their own intended owner. The present issue is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The more direct action is “The selected distribution bridge is root and redundant ports show expected roles” because the best verification observation is: The selected distribution bridge is root and redundant ports show expected roles.

Question 192

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing RSTP, MSTP and switching interconnects during a post-maintenance incident review (HCIP-H12-821-SWITCH-048). The observed network issue is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. Which routing, switching, or network principle best explains the appropriate solution?

  1. Switch stacking creates a logical control relationship from compatible physical members.
  2. A switch forwarding domain is determined by VLAN tagging and port membership.
  3. Spanning tree and default-gateway failover are independent control mechanisms.
  4. STP root election uses bridge identifier priorities and MAC tie-breaking.

Explanation

Correct Answer

D:

The governing principle is: STP root election uses bridge identifier priorities and MAC tie-breaking. In this scenario, the appropriate action is: Set deliberate bridge priority and verify the elected root and port roles across the VLAN. Valid evidence would show: The selected distribution bridge is root and redundant ports show expected roles.

Incorrect Answers

A:

“Switch stacking creates a logical control relationship from compatible physical members” responds to another technical or business failure: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. That source case depends on: Switch stacking creates a logical control relationship from compatible physical members. The present issue is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The more direct action is “STP root election uses bridge identifier priorities and MAC tie-breaking” because STP root election uses bridge identifier priorities and MAC tie-breaking.

B:

“A switch forwarding domain is determined by VLAN tagging and port membership” responds to another technical or business failure: Users from two access VLANs unexpectedly communicate at layer 2 because the same port VLAN was configured on both groups. That source case depends on: A switch forwarding domain is determined by VLAN tagging and port membership. The present issue is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The more direct action is “STP root election uses bridge identifier priorities and MAC tie-breaking” because STP root election uses bridge identifier priorities and MAC tie-breaking.

C:

“Spanning tree and default-gateway failover are independent control mechanisms” responds to another technical or business failure: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. That source case depends on: Spanning tree and default-gateway failover are independent control mechanisms. The present issue is: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. The more direct action is “STP root election uses bridge identifier priorities and MAC tie-breaking” because STP root election uses bridge identifier priorities and MAC tie-breaking.

Question 193

At fictional Dovetail University, a network engineer supporting campus routing is reviewing route-policy and traffic-control behavior during a customer network audit (HCIP-H12-821-POLICY-049). The observed network issue is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. Which routing, switching, or network principle best explains the appropriate solution?

  1. Policy association points control which imported routing information is modified.
  2. Bidirectional route redistribution requires loop prevention and consistent route ownership.
  3. IP prefix filtering depends on both address prefix and permitted length ranges.
  4. Route redistribution crosses protocol boundaries and needs controlled prefix filtering.

Explanation

Correct Answer

C:

The governing principle is: IP prefix filtering depends on both address prefix and permitted length ranges. In this scenario, the appropriate action is: Correct the prefix-filter network and mask length parameters for intended component routes. Valid evidence would show: Only authorized /24 components are accepted and the prohibited aggregates remain excluded.

Incorrect Answers

A:

“Policy association points control which imported routing information is modified” responds to another technical or business failure: An import routing policy changes route preference globally when only one partner's redistributed routes should be affected. That source case depends on: Policy association points control which imported routing information is modified. The present issue is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. The more direct action is “IP prefix filtering depends on both address prefix and permitted length ranges” because IP prefix filtering depends on both address prefix and permitted length ranges.

B:

“Bidirectional route redistribution requires loop prevention and consistent route ownership” responds to another technical or business failure: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. That source case depends on: Bidirectional route redistribution requires loop prevention and consistent route ownership. The present issue is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. The more direct action is “IP prefix filtering depends on both address prefix and permitted length ranges” because IP prefix filtering depends on both address prefix and permitted length ranges.

D:

“Route redistribution crosses protocol boundaries and needs controlled prefix filtering” responds to another technical or business failure: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. That source case depends on: Route redistribution crosses protocol boundaries and needs controlled prefix filtering. The present issue is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. The more direct action is “IP prefix filtering depends on both address prefix and permitted length ranges” because IP prefix filtering depends on both address prefix and permitted length ranges.

Question 194

At fictional Dovetail University, a network engineer supporting campus routing is reviewing route-policy and traffic-control behavior during a customer network audit (HCIP-H12-821-POLICY-049). The observed network issue is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. Which next engineering action best addresses the reported problem?

  1. Mark redistributed routes and block re-import at reciprocal protocol boundaries.
  2. Correct the prefix-filter network and mask length parameters for intended component routes.
  3. Review route-policy node sequence and permit or deny outcomes for matching and unmatched routes.
  4. Audit trust boundaries and re-marking configuration across the complete forwarding path.

Explanation

Correct Answer

B:

The directly responsive action is: Correct the prefix-filter network and mask length parameters for intended component routes. The specific reported fault is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. Confirmation should show: Only authorized /24 components are accepted and the prohibited aggregates remain excluded. The supporting technical principle is: IP prefix filtering depends on both address prefix and permitted length ranges.

Incorrect Answers

A:

“Mark redistributed routes and block re-import at reciprocal protocol boundaries” responds to another technical or business failure: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. That source case depends on: Bidirectional route redistribution requires loop prevention and consistent route ownership. The present issue is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. The more direct action is “Correct the prefix-filter network and mask length parameters for intended component routes” because IP prefix filtering depends on both address prefix and permitted length ranges.

C:

“Review route-policy node sequence and permit or deny outcomes for matching and unmatched routes” responds to another technical or business failure: A Huawei route-policy matches a prefix but the engineer expects every route passing the first node to continue through later nodes. That source case depends on: Ordered route policies evaluate match conditions and actions rather than combining all nodes indiscriminately. The present issue is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. The more direct action is “Correct the prefix-filter network and mask length parameters for intended component routes” because IP prefix filtering depends on both address prefix and permitted length ranges.

D:

“Audit trust boundaries and re-marking configuration across the complete forwarding path” responds to another technical or business failure: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. That source case depends on: End-to-end QoS depends on consistent marking trust and scheduling policy. The present issue is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. The more direct action is “Correct the prefix-filter network and mask length parameters for intended component routes” because IP prefix filtering depends on both address prefix and permitted length ranges.

Question 195

At fictional Dovetail University, a network engineer supporting campus routing is reviewing route-policy and traffic-control behavior during a customer network audit (HCIP-H12-821-POLICY-049). The observed network issue is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. Which observation most directly verifies that the corrective change succeeded?

  1. Voice delay remains within service objectives without starving lower-priority classes.
  2. Only routes carrying the approved community receive the intended export action.
  3. Controlled traffic shows desired throughput and measured color actions without unexpected loss.
  4. Only authorized /24 components are accepted and the prohibited aggregates remain excluded.

Explanation

Correct Answer

D:

The best verification observation is: Only authorized /24 components are accepted and the prohibited aggregates remain excluded. It demonstrates the corrective action: Correct the prefix-filter network and mask length parameters for intended component routes. This fits the principle: IP prefix filtering depends on both address prefix and permitted length ranges. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Voice delay remains within service objectives without starving lower-priority classes” responds to another technical or business failure: A campus egress port uses weighted scheduling but latency-sensitive voice sits behind large bulk transfers. That source case depends on: The best verification observation is: Voice delay remains within service objectives without starving lower-priority classes. The present issue is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. The more direct action is “Only authorized /24 components are accepted and the prohibited aggregates remain excluded” because the best verification observation is: Only authorized /24 components are accepted and the prohibited aggregates remain excluded.

B:

“Only routes carrying the approved community receive the intended export action” responds to another technical or business failure: An engineer sets a BGP route community but forgets the matching export policy and upstream advertisements are unchanged. That source case depends on: The best verification observation is: Only routes carrying the approved community receive the intended export action. The present issue is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. The more direct action is “Only authorized /24 components are accepted and the prohibited aggregates remain excluded” because the best verification observation is: Only authorized /24 components are accepted and the prohibited aggregates remain excluded.

C:

“Controlled traffic shows desired throughput and measured color actions without unexpected loss” responds to another technical or business failure: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. That source case depends on: The best verification observation is: Controlled traffic shows desired throughput and measured color actions without unexpected loss. The present issue is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. The more direct action is “Only authorized /24 components are accepted and the prohibited aggregates remain excluded” because the best verification observation is: Only authorized /24 components are accepted and the prohibited aggregates remain excluded.

Question 196

At fictional Dovetail University, a network engineer supporting campus routing is reviewing route-policy and traffic-control behavior during a customer network audit (HCIP-H12-821-POLICY-049). The observed network issue is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. Which ongoing preventive or detective control would best reduce recurrence?

  1. Compare advertised communities and final export decisions after policy updates.
  2. Test route-policy node hit outcomes using explicit positive and negative prefixes.
  3. Test PBR failover and unresolved-next-hop behavior in a controlled environment.
  4. Verify boundary prefix lengths whenever modifying route filters.

Explanation

Correct Answer

D:

The preventive or detective safeguard is: Verify boundary prefix lengths whenever modifying route filters. This directly addresses the recurring fault: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. The corrective action would be: Correct the prefix-filter network and mask length parameters for intended component routes. Success is demonstrated when: Only authorized /24 components are accepted and the prohibited aggregates remain excluded.

Incorrect Answers

A:

“Compare advertised communities and final export decisions after policy updates” addresses recurrence of another problem: An engineer sets a BGP route community but forgets the matching export policy and upstream advertisements are unchanged. That problem depends on: The preventive or detective safeguard is: Compare advertised communities and final export decisions after policy updates. The recurring risk here is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. The more targeted safeguard is “Verify boundary prefix lengths whenever modifying route filters” because the preventive or detective safeguard is: Verify boundary prefix lengths whenever modifying route filters.

B:

“Test route-policy node hit outcomes using explicit positive and negative prefixes” addresses recurrence of another problem: A Huawei route-policy matches a prefix but the engineer expects every route passing the first node to continue through later nodes. That problem depends on: The preventive or detective safeguard is: Test route-policy node hit outcomes using explicit positive and negative prefixes. The recurring risk here is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. The more targeted safeguard is “Verify boundary prefix lengths whenever modifying route filters” because the preventive or detective safeguard is: Verify boundary prefix lengths whenever modifying route filters.

C:

“Test PBR failover and unresolved-next-hop behavior in a controlled environment” addresses recurrence of another problem: A policy-based routing rule sends traffic toward a next hop that cannot be resolved in the correct VRF. That problem depends on: The preventive or detective safeguard is: Test PBR failover and unresolved-next-hop behavior in a controlled environment. The recurring risk here is: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. The more targeted safeguard is “Verify boundary prefix lengths whenever modifying route filters” because the preventive or detective safeguard is: Verify boundary prefix lengths whenever modifying route filters.

Question 197

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing IPv6 addressing and neighbor discovery during a network troubleshooting drill (HCIP-H12-821-IPV6-050). The observed network issue is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. Which observation most directly verifies that the corrective change succeeded?

  1. Hosts obtain the intended SLAAC or DHCPv6 address and ancillary configuration.
  2. Failure domains remain bounded and approved segments reach services through expected gateways.
  3. Neighbor cache resolves the legitimate next hop and IPv6 forwarding succeeds.
  4. Allowed areas receive the expected external route with a valid forwarding next hop.

Explanation

Correct Answer

A:

The best verification observation is: Hosts obtain the intended SLAAC or DHCPv6 address and ancillary configuration. It demonstrates the corrective action: Check RA autonomous prefix flags and DHCPv6 managed or other-configuration signaling. This fits the principle: IPv6 RA flags and prefix options influence autonomous and stateful configuration behavior. Verify on the actual Huawei platform and network release.

Incorrect Answers

B:

“Failure domains remain bounded and approved segments reach services through expected gateways” responds to another technical or business failure: An enterprise campus project chooses a flat broadcast domain for thousands of users rather than a hierarchical design. That source case depends on: The best verification observation is: Failure domains remain bounded and approved segments reach services through expected gateways. The present issue is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. The more direct action is “Hosts obtain the intended SLAAC or DHCPv6 address and ancillary configuration” because the best verification observation is: Hosts obtain the intended SLAAC or DHCPv6 address and ancillary configuration.

C:

“Neighbor cache resolves the legitimate next hop and IPv6 forwarding succeeds” responds to another technical or business failure: A router forwards IPv6 packets over a link but neighbor solicitation never receives a valid advertisement for the selected next hop. That source case depends on: The best verification observation is: Neighbor cache resolves the legitimate next hop and IPv6 forwarding succeeds. The present issue is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. The more direct action is “Hosts obtain the intended SLAAC or DHCPv6 address and ancillary configuration” because the best verification observation is: Hosts obtain the intended SLAAC or DHCPv6 address and ancillary configuration.

D:

“Allowed areas receive the expected external route with a valid forwarding next hop” responds to another technical or business failure: An ASBR redistributes a static service subnet but other areas never see its external OSPF destination. That source case depends on: The best verification observation is: Allowed areas receive the expected external route with a valid forwarding next hop. The present issue is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. The more direct action is “Hosts obtain the intended SLAAC or DHCPv6 address and ancillary configuration” because the best verification observation is: Hosts obtain the intended SLAAC or DHCPv6 address and ancillary configuration.

Question 198

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing IPv6 addressing and neighbor discovery during a network troubleshooting drill (HCIP-H12-821-IPV6-050). The observed network issue is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. Which next engineering action best addresses the reported problem?

  1. Verify RR cluster design and use appropriate cluster IDs for intentional reflection domains.
  2. Check RA autonomous prefix flags and DHCPv6 managed or other-configuration signaling.
  3. Align compatible totally stub area behavior at the ABR and validate permitted summary advertisements.
  4. Diagnose solicited-node multicast, NDP cache state and link-layer adjacency to the next hop.

Explanation

Correct Answer

B:

The directly responsive action is: Check RA autonomous prefix flags and DHCPv6 managed or other-configuration signaling. The specific reported fault is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. Confirmation should show: Hosts obtain the intended SLAAC or DHCPv6 address and ancillary configuration. The supporting technical principle is: IPv6 RA flags and prefix options influence autonomous and stateful configuration behavior.

Incorrect Answers

A:

“Verify RR cluster design and use appropriate cluster IDs for intentional reflection domains” responds to another technical or business failure: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. That source case depends on: BGP route reflectors use cluster-list attributes to detect reflection loops. The present issue is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. The more direct action is “Check RA autonomous prefix flags and DHCPv6 managed or other-configuration signaling” because IPv6 RA flags and prefix options influence autonomous and stateful configuration behavior.

C:

“Align compatible totally stub area behavior at the ABR and validate permitted summary advertisements” responds to another technical or business failure: An OSPF totally stubby area receives unwanted detailed inter-area routes after only one router's configuration changes. That source case depends on: Totally stubby area behavior reduces inter-area summary visibility beyond ordinary stub restrictions. The present issue is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. The more direct action is “Check RA autonomous prefix flags and DHCPv6 managed or other-configuration signaling” because IPv6 RA flags and prefix options influence autonomous and stateful configuration behavior.

D:

“Diagnose solicited-node multicast, NDP cache state and link-layer adjacency to the next hop” responds to another technical or business failure: A router forwards IPv6 packets over a link but neighbor solicitation never receives a valid advertisement for the selected next hop. That source case depends on: IPv6 uses Neighbor Solicitation and Advertisement in place of ARP for address resolution. The present issue is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. The more direct action is “Check RA autonomous prefix flags and DHCPv6 managed or other-configuration signaling” because IPv6 RA flags and prefix options influence autonomous and stateful configuration behavior.

Question 199

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing IPv6 addressing and neighbor discovery during a network troubleshooting drill (HCIP-H12-821-IPV6-050). The observed network issue is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. Which ongoing preventive or detective control would best reduce recurrence?

  1. Review campus failure domains and uplink resiliency before rollout.
  2. Record RA and DHCPv6 flag requirements for each client segment.
  3. Verify RF design through client roaming tests in dense locations.
  4. Validate NDP and PMTU when designing IPv6 ACLs.

Explanation

Correct Answer

B:

The preventive or detective safeguard is: Record RA and DHCPv6 flag requirements for each client segment. This directly addresses the recurring fault: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. The corrective action would be: Check RA autonomous prefix flags and DHCPv6 managed or other-configuration signaling. Success is demonstrated when: Hosts obtain the intended SLAAC or DHCPv6 address and ancillary configuration.

Incorrect Answers

A:

“Review campus failure domains and uplink resiliency before rollout” addresses recurrence of another problem: An enterprise campus project chooses a flat broadcast domain for thousands of users rather than a hierarchical design. That problem depends on: The preventive or detective safeguard is: Review campus failure domains and uplink resiliency before rollout. The recurring risk here is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. The more targeted safeguard is “Record RA and DHCPv6 flag requirements for each client segment” because the preventive or detective safeguard is: Record RA and DHCPv6 flag requirements for each client segment.

C:

“Verify RF design through client roaming tests in dense locations” addresses recurrence of another problem: A Wi-Fi deployment applies identical power levels in a dense conference center and clients roam unpredictably to distant APs. That problem depends on: The preventive or detective safeguard is: Verify RF design through client roaming tests in dense locations. The recurring risk here is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. The more targeted safeguard is “Record RA and DHCPv6 flag requirements for each client segment” because the preventive or detective safeguard is: Record RA and DHCPv6 flag requirements for each client segment.

D:

“Validate NDP and PMTU when designing IPv6 ACLs” addresses recurrence of another problem: A network blocks all ICMPv6 for security and then finds neighbor resolution and path MTU discovery broken. That problem depends on: The preventive or detective safeguard is: Validate NDP and PMTU when designing IPv6 ACLs. The recurring risk here is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. The more targeted safeguard is “Record RA and DHCPv6 flag requirements for each client segment” because the preventive or detective safeguard is: Record RA and DHCPv6 flag requirements for each client segment.

Question 200

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing IPv6 addressing and neighbor discovery during a network troubleshooting drill (HCIP-H12-821-IPV6-050). The observed network issue is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. Which routing, switching, or network principle best explains the appropriate solution?

  1. Equal-cost shortest paths must also be installed under platform ECMP constraints.
  2. BGP FSM states distinguish session formation failures from routing-update processing.
  3. IPv6 addressing, NDP and route selection are separate prerequisites for forwarding.
  4. IPv6 RA flags and prefix options influence autonomous and stateful configuration behavior.

Explanation

Correct Answer

D:

The governing principle is: IPv6 RA flags and prefix options influence autonomous and stateful configuration behavior. In this scenario, the appropriate action is: Check RA autonomous prefix flags and DHCPv6 managed or other-configuration signaling. Valid evidence would show: Hosts obtain the intended SLAAC or DHCPv6 address and ancillary configuration.

Incorrect Answers

A:

“Equal-cost shortest paths must also be installed under platform ECMP constraints” responds to another technical or business failure: Two equal-cost OSPF paths exist but traffic uses only one because the forwarding configuration limits ECMP. That source case depends on: Equal-cost shortest paths must also be installed under platform ECMP constraints. The present issue is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. The more direct action is “IPv6 RA flags and prefix options influence autonomous and stateful configuration behavior” because IPv6 RA flags and prefix options influence autonomous and stateful configuration behavior.

B:

“BGP FSM states distinguish session formation failures from routing-update processing” responds to another technical or business failure: BGP stays in Idle after a new neighbor is configured and operators troubleshoot route policies instead of local interface reachability. That source case depends on: BGP FSM states distinguish session formation failures from routing-update processing. The present issue is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. The more direct action is “IPv6 RA flags and prefix options influence autonomous and stateful configuration behavior” because IPv6 RA flags and prefix options influence autonomous and stateful configuration behavior.

C:

“IPv6 addressing, NDP and route selection are separate prerequisites for forwarding” responds to another technical or business failure: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. That source case depends on: IPv6 addressing, NDP and route selection are separate prerequisites for forwarding. The present issue is: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. The more direct action is “IPv6 RA flags and prefix options influence autonomous and stateful configuration behavior” because IPv6 RA flags and prefix options influence autonomous and stateful configuration behavior.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests