McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 23

Question 220

At fictional Granite Logistics, a network engineer supporting warehouse distribution is reviewing OSPF area design and link-state convergence during an initial deployment test (HCIP-H12-821-OSPF-055). The observed network issue is: An OSPF DR election change unexpectedly disrupts traffic because an engineer assumes elections are always preemptive. Which ongoing preventive or detective control would best reduce recurrence?

  1. Validate current DR or BDR role rather than predicting it from priority alone.
  2. Review ASBR summarized route contents before production advertisement.
  3. Validate Type 7 generation and ABR translation during branch redistribution testing.
  4. Verify external LSA attributes and forwarding resolution on every ASBR redesign.

Explanation

Correct Answer

A:

The preventive or detective safeguard is: Validate current DR or BDR role rather than predicting it from priority alone. This directly addresses the recurring fault: An OSPF DR election change unexpectedly disrupts traffic because an engineer assumes elections are always preemptive. The corrective action would be: Plan a controlled maintenance event and understand the nonpreemptive DR election behavior. Success is demonstrated when: The new DR or BDR assignment appears only after an appropriate election-triggering event.

Incorrect Answers

B:

“Review ASBR summarized route contents before production advertisement” addresses recurrence of another problem: An ASBR advertising multiple external subnets floods excessive details because external route aggregation was never applied. That problem depends on: The preventive or detective safeguard is: Review ASBR summarized route contents before production advertisement. The recurring risk here is: An OSPF DR election change unexpectedly disrupts traffic because an engineer assumes elections are always preemptive. The more targeted safeguard is “Validate current DR or BDR role rather than predicting it from priority alone” because the preventive or detective safeguard is: Validate current DR or BDR role rather than predicting it from priority alone.

C:

“Validate Type 7 generation and ABR translation during branch redistribution testing” addresses recurrence of another problem: An NSSA branch redistributes a local service prefix but the backbone never receives the route. That problem depends on: The preventive or detective safeguard is: Validate Type 7 generation and ABR translation during branch redistribution testing. The recurring risk here is: An OSPF DR election change unexpectedly disrupts traffic because an engineer assumes elections are always preemptive. The more targeted safeguard is “Validate current DR or BDR role rather than predicting it from priority alone” because the preventive or detective safeguard is: Validate current DR or BDR role rather than predicting it from priority alone.

D:

“Verify external LSA attributes and forwarding resolution on every ASBR redesign” addresses recurrence of another problem: An external OSPF route prefers the wrong exit because its forwarding address is unreachable or unexpected. That problem depends on: The preventive or detective safeguard is: Verify external LSA attributes and forwarding resolution on every ASBR redesign. The recurring risk here is: An OSPF DR election change unexpectedly disrupts traffic because an engineer assumes elections are always preemptive. The more targeted safeguard is “Validate current DR or BDR role rather than predicting it from priority alone” because the preventive or detective safeguard is: Validate current DR or BDR role rather than predicting it from priority alone.

Question 221

At fictional Northgate Services, a network engineer supporting head-office connectivity is reviewing OSPF area design and link-state convergence during a network troubleshooting drill (HCIP-H12-821-OSPF-056). The observed network issue is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. Which next engineering action best addresses the reported problem?

  1. Investigate bidirectional Hello reception and permitted multicast or interface filtering on the segment.
  2. Inspect the external LSA forwarding address and the routing table's ability to resolve it.
  3. Compare E1 versus E2 metric handling and evaluate route selection under competing exits.
  4. Align interface OSPF area assignment on both ends without changing unrelated adjacencies.

Explanation

Correct Answer

A:

The directly responsive action is: Investigate bidirectional Hello reception and permitted multicast or interface filtering on the segment. The specific reported fault is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. Confirmation should show: Each router sees its own router ID in received Hello neighbor lists and advances beyond Init. The supporting technical principle is: OSPF two-way communication is established only after reciprocal Hello discovery.

Incorrect Answers

B:

“Inspect the external LSA forwarding address and the routing table's ability to resolve it” responds to another technical or business failure: An external OSPF route prefers the wrong exit because its forwarding address is unreachable or unexpected. That source case depends on: OSPF external route next-hop selection can use the LSA forwarding address when present. The present issue is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. The more direct action is “Investigate bidirectional Hello reception and permitted multicast or interface filtering on the segment” because OSPF two-way communication is established only after reciprocal Hello discovery.

C:

“Compare E1 versus E2 metric handling and evaluate route selection under competing exits” responds to another technical or business failure: An engineer mistakes an OSPF external Type 2 metric for a path whose internal costs are always added to its advertised value. That source case depends on: OSPF E1 and E2 external cost calculations treat internal path costs differently. The present issue is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. The more direct action is “Investigate bidirectional Hello reception and permitted multicast or interface filtering on the segment” because OSPF two-way communication is established only after reciprocal Hello discovery.

D:

“Align interface OSPF area assignment on both ends without changing unrelated adjacencies” responds to another technical or business failure: Two neighboring Huawei routers exchange Hello packets but never become OSPF neighbors because their area identifiers differ. That source case depends on: OSPF neighbor formation requires matching area configuration on shared links. The present issue is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. The more direct action is “Investigate bidirectional Hello reception and permitted multicast or interface filtering on the segment” because OSPF two-way communication is established only after reciprocal Hello discovery.

Question 222

At fictional Northgate Services, a network engineer supporting head-office connectivity is reviewing OSPF area design and link-state convergence during a network troubleshooting drill (HCIP-H12-821-OSPF-056). The observed network issue is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. Which routing, switching, or network principle best explains the appropriate solution?

  1. Broadcast OSPF does not require every pair of DROthers to form a full adjacency.
  2. Incompatible interface MTU can interrupt OSPF database synchronization.
  3. OSPF two-way communication is established only after reciprocal Hello discovery.
  4. OSPF routing exchanges depend on matched authentication parameters when authentication is enabled.

Explanation

Correct Answer

C:

The governing principle is: OSPF two-way communication is established only after reciprocal Hello discovery. In this scenario, the appropriate action is: Investigate bidirectional Hello reception and permitted multicast or interface filtering on the segment. Valid evidence would show: Each router sees its own router ID in received Hello neighbor lists and advances beyond Init.

Incorrect Answers

A:

“Broadcast OSPF does not require every pair of DROthers to form a full adjacency” responds to another technical or business failure: Two OSPF routers on a broadcast VLAN stay at 2-Way and an engineer wrongly treats every such neighbor as failed. That source case depends on: Broadcast OSPF does not require every pair of DROthers to form a full adjacency. The present issue is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. The more direct action is “OSPF two-way communication is established only after reciprocal Hello discovery” because OSPF two-way communication is established only after reciprocal Hello discovery.

B:

“Incompatible interface MTU can interrupt OSPF database synchronization” responds to another technical or business failure: An OSPF neighbor stays in Exchange and large database description packets fail over a reduced-MTU tunnel. That source case depends on: Incompatible interface MTU can interrupt OSPF database synchronization. The present issue is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. The more direct action is “OSPF two-way communication is established only after reciprocal Hello discovery” because OSPF two-way communication is established only after reciprocal Hello discovery.

D:

“OSPF routing exchanges depend on matched authentication parameters when authentication is enabled” responds to another technical or business failure: An OSPF adjacency repeatedly fails due to mismatched authentication algorithms after a maintenance window. That source case depends on: OSPF routing exchanges depend on matched authentication parameters when authentication is enabled. The present issue is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. The more direct action is “OSPF two-way communication is established only after reciprocal Hello discovery” because OSPF two-way communication is established only after reciprocal Hello discovery.

Question 223

At fictional Northgate Services, a network engineer supporting head-office connectivity is reviewing OSPF area design and link-state convergence during a network troubleshooting drill (HCIP-H12-821-OSPF-056). The observed network issue is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. Which ongoing preventive or detective control would best reduce recurrence?

  1. Verify neighbor roles before escalating stable 2-Way observations.
  2. Capture Hellos from both devices when link-state adjacencies stall.
  3. Include priority and election expectations in campus VLAN rollout plans.
  4. Include transport MTU and packet-size tests in tunnel routing acceptance.

Explanation

Correct Answer

B:

The preventive or detective safeguard is: Capture Hellos from both devices when link-state adjacencies stall. This directly addresses the recurring fault: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. The corrective action would be: Investigate bidirectional Hello reception and permitted multicast or interface filtering on the segment. Success is demonstrated when: Each router sees its own router ID in received Hello neighbor lists and advances beyond Init.

Incorrect Answers

A:

“Verify neighbor roles before escalating stable 2-Way observations” addresses recurrence of another problem: Two OSPF routers on a broadcast VLAN stay at 2-Way and an engineer wrongly treats every such neighbor as failed. That problem depends on: The preventive or detective safeguard is: Verify neighbor roles before escalating stable 2-Way observations. The recurring risk here is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. The more targeted safeguard is “Capture Hellos from both devices when link-state adjacencies stall” because the preventive or detective safeguard is: Capture Hellos from both devices when link-state adjacencies stall.

C:

“Include priority and election expectations in campus VLAN rollout plans” addresses recurrence of another problem: A new router with OSPF priority zero fails to become the designated router even after repeated interface bounces. That problem depends on: The preventive or detective safeguard is: Include priority and election expectations in campus VLAN rollout plans. The recurring risk here is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. The more targeted safeguard is “Capture Hellos from both devices when link-state adjacencies stall” because the preventive or detective safeguard is: Capture Hellos from both devices when link-state adjacencies stall.

D:

“Include transport MTU and packet-size tests in tunnel routing acceptance” addresses recurrence of another problem: An OSPF neighbor stays in Exchange and large database description packets fail over a reduced-MTU tunnel. That problem depends on: The preventive or detective safeguard is: Include transport MTU and packet-size tests in tunnel routing acceptance. The recurring risk here is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. The more targeted safeguard is “Capture Hellos from both devices when link-state adjacencies stall” because the preventive or detective safeguard is: Capture Hellos from both devices when link-state adjacencies stall.

Question 224

At fictional Northgate Services, a network engineer supporting head-office connectivity is reviewing OSPF area design and link-state convergence during a network troubleshooting drill (HCIP-H12-821-OSPF-056). The observed network issue is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. Which observation most directly verifies that the corrective change succeeded?

  1. The DROther pair remains 2-Way while each establishes proper Full adjacency with DR or BDR.
  2. Each router sees its own router ID in received Hello neighbor lists and advances beyond Init.
  3. Locally redistributed prefixes remain reachable while the defined external LSA constraints hold.
  4. Router IDs are unique across the domain and database exchange proceeds to Full.

Explanation

Correct Answer

B:

The best verification observation is: Each router sees its own router ID in received Hello neighbor lists and advances beyond Init. It demonstrates the corrective action: Investigate bidirectional Hello reception and permitted multicast or interface filtering on the segment. This fits the principle: OSPF two-way communication is established only after reciprocal Hello discovery. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“The DROther pair remains 2-Way while each establishes proper Full adjacency with DR or BDR” responds to another technical or business failure: Two OSPF routers on a broadcast VLAN stay at 2-Way and an engineer wrongly treats every such neighbor as failed. That source case depends on: The best verification observation is: The DROther pair remains 2-Way while each establishes proper Full adjacency with DR or BDR. The present issue is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. The more direct action is “Each router sees its own router ID in received Hello neighbor lists and advances beyond Init” because the best verification observation is: Each router sees its own router ID in received Hello neighbor lists and advances beyond Init.

C:

“Locally redistributed prefixes remain reachable while the defined external LSA constraints hold” responds to another technical or business failure: An engineer designates an OSPF NSSA as a stub to reduce LSAs but unintentionally removes local redistribution. That source case depends on: The best verification observation is: Locally redistributed prefixes remain reachable while the defined external LSA constraints hold. The present issue is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. The more direct action is “Each router sees its own router ID in received Hello neighbor lists and advances beyond Init” because the best verification observation is: Each router sees its own router ID in received Hello neighbor lists and advances beyond Init.

D:

“Router IDs are unique across the domain and database exchange proceeds to Full” responds to another technical or business failure: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. That source case depends on: The best verification observation is: Router IDs are unique across the domain and database exchange proceeds to Full. The present issue is: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. The more direct action is “Each router sees its own router ID in received Hello neighbor lists and advances beyond Init” because the best verification observation is: Each router sees its own router ID in received Hello neighbor lists and advances beyond Init.

Question 225

At fictional Pinewell Electronics, a network engineer supporting engineering labs is reviewing router control and forwarding planes during a lab-to-production acceptance (HCIP-H12-821-ROUTING-057). The observed network issue is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. Which observation most directly verifies that the corrective change succeeded?

  1. Access routers select the documented exit and no longer follow an accidental preferred attachment.
  2. The intended interface participates in OSPF and its prefix is announced appropriately.
  3. The primary route is active in the intended table and the backup only becomes active when needed.
  4. The destination has a usable FIB entry matching the selected RIB next hop.

Explanation

Correct Answer

D:

The best verification observation is: The destination has a usable FIB entry matching the selected RIB next hop. It demonstrates the corrective action: Compare selected RIB routes with downloaded FIB entries and diagnose unresolved or unsupported next hops. This fits the principle: A route can exist in the control-plane database without being successfully programmed for forwarding. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Access routers select the documented exit and no longer follow an accidental preferred attachment” responds to another technical or business failure: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. That source case depends on: The best verification observation is: Access routers select the documented exit and no longer follow an accidental preferred attachment. The present issue is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. The more direct action is “The destination has a usable FIB entry matching the selected RIB next hop” because the best verification observation is: The destination has a usable FIB entry matching the selected RIB next hop.

B:

“The intended interface participates in OSPF and its prefix is announced appropriately” responds to another technical or business failure: OSPF adjacency is stable but a route to a target subnet is absent due to network-statement matching mistakes. That source case depends on: The best verification observation is: The intended interface participates in OSPF and its prefix is announced appropriately. The present issue is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. The more direct action is “The destination has a usable FIB entry matching the selected RIB next hop” because the best verification observation is: The destination has a usable FIB entry matching the selected RIB next hop.

C:

“The primary route is active in the intended table and the backup only becomes active when needed” responds to another technical or business failure: A backup static route takes over even though the preferred next hop is still reachable in the wrong VRF. That source case depends on: The best verification observation is: The primary route is active in the intended table and the backup only becomes active when needed. The present issue is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. The more direct action is “The destination has a usable FIB entry matching the selected RIB next hop” because the best verification observation is: The destination has a usable FIB entry matching the selected RIB next hop.

Question 226

At fictional Pinewell Electronics, a network engineer supporting engineering labs is reviewing router control and forwarding planes during a lab-to-production acceptance (HCIP-H12-821-ROUTING-057). The observed network issue is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. Which next engineering action best addresses the reported problem?

  1. Configure or learn a valid IPv6 default route and verify neighbor reachability separately.
  2. Correct firewall zone assignment and apply explicit permitted interzone access rules.
  3. Trace prefix installation from routing protocol through RIB and FIB to a controlled end-to-end packet.
  4. Compare selected RIB routes with downloaded FIB entries and diagnose unresolved or unsupported next hops.

Explanation

Correct Answer

D:

The directly responsive action is: Compare selected RIB routes with downloaded FIB entries and diagnose unresolved or unsupported next hops. The specific reported fault is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. Confirmation should show: The destination has a usable FIB entry matching the selected RIB next hop. The supporting technical principle is: A route can exist in the control-plane database without being successfully programmed for forwarding.

Incorrect Answers

A:

“Configure or learn a valid IPv6 default route and verify neighbor reachability separately” responds to another technical or business failure: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. That source case depends on: IPv6 addressing, NDP and route selection are separate prerequisites for forwarding. The present issue is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. The more direct action is “Compare selected RIB routes with downloaded FIB entries and diagnose unresolved or unsupported next hops” because a route can exist in the control-plane database without being successfully programmed for forwarding.

B:

“Correct firewall zone assignment and apply explicit permitted interzone access rules” responds to another technical or business failure: A network places a server in a DMZ but mistakenly assigns its interface to the internal trust zone. That source case depends on: Security zones reflect interface trust boundaries used by policy evaluation. The present issue is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. The more direct action is “Compare selected RIB routes with downloaded FIB entries and diagnose unresolved or unsupported next hops” because a route can exist in the control-plane database without being successfully programmed for forwarding.

C:

“Trace prefix installation from routing protocol through RIB and FIB to a controlled end-to-end packet” responds to another technical or business failure: An engineer changes a route policy but tests only the local routing table and overlooks downstream forwarding. That source case depends on: A valid routing control decision must be verified against actual forwarding behavior. The present issue is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. The more direct action is “Compare selected RIB routes with downloaded FIB entries and diagnose unresolved or unsupported next hops” because a route can exist in the control-plane database without being successfully programmed for forwarding.

Question 227

At fictional Pinewell Electronics, a network engineer supporting engineering labs is reviewing router control and forwarding planes during a lab-to-production acceptance (HCIP-H12-821-ROUTING-057). The observed network issue is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. Which ongoing preventive or detective control would best reduce recurrence?

  1. Verify forwarding-plane installation as well as route reception during changes.
  2. Include transport MTU and packet-size tests in tunnel routing acceptance.
  3. Audit static route VRF association and next-hop reachability after migrations.
  4. Verify external LSA attributes and forwarding resolution on every ASBR redesign.

Explanation

Correct Answer

A:

The preventive or detective safeguard is: Verify forwarding-plane installation as well as route reception during changes. This directly addresses the recurring fault: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. The corrective action would be: Compare selected RIB routes with downloaded FIB entries and diagnose unresolved or unsupported next hops. Success is demonstrated when: The destination has a usable FIB entry matching the selected RIB next hop.

Incorrect Answers

B:

“Include transport MTU and packet-size tests in tunnel routing acceptance” addresses recurrence of another problem: An OSPF neighbor stays in Exchange and large database description packets fail over a reduced-MTU tunnel. That problem depends on: The preventive or detective safeguard is: Include transport MTU and packet-size tests in tunnel routing acceptance. The recurring risk here is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. The more targeted safeguard is “Verify forwarding-plane installation as well as route reception during changes” because the preventive or detective safeguard is: Verify forwarding-plane installation as well as route reception during changes.

C:

“Audit static route VRF association and next-hop reachability after migrations” addresses recurrence of another problem: A backup static route takes over even though the preferred next hop is still reachable in the wrong VRF. That problem depends on: The preventive or detective safeguard is: Audit static route VRF association and next-hop reachability after migrations. The recurring risk here is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. The more targeted safeguard is “Verify forwarding-plane installation as well as route reception during changes” because the preventive or detective safeguard is: Verify forwarding-plane installation as well as route reception during changes.

D:

“Verify external LSA attributes and forwarding resolution on every ASBR redesign” addresses recurrence of another problem: An external OSPF route prefers the wrong exit because its forwarding address is unreachable or unexpected. That problem depends on: The preventive or detective safeguard is: Verify external LSA attributes and forwarding resolution on every ASBR redesign. The recurring risk here is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. The more targeted safeguard is “Verify forwarding-plane installation as well as route reception during changes” because the preventive or detective safeguard is: Verify forwarding-plane installation as well as route reception during changes.

Question 228

At fictional Pinewell Electronics, a network engineer supporting engineering labs is reviewing router control and forwarding planes during a lab-to-production acceptance (HCIP-H12-821-ROUTING-057). The observed network issue is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. Which routing, switching, or network principle best explains the appropriate solution?

  1. A route can exist in the control-plane database without being successfully programmed for forwarding.
  2. Bidirectional Forwarding Detection provides fast failure detection independent of routing protocol timers.
  3. EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination.
  4. Route installation depends on routing-instance scope and next-hop resolution as well as preference.

Explanation

Correct Answer

A:

The governing principle is: A route can exist in the control-plane database without being successfully programmed for forwarding. In this scenario, the appropriate action is: Compare selected RIB routes with downloaded FIB entries and diagnose unresolved or unsupported next hops. Valid evidence would show: The destination has a usable FIB entry matching the selected RIB next hop.

Incorrect Answers

B:

“Bidirectional Forwarding Detection provides fast failure detection independent of routing protocol timers” responds to another technical or business failure: A router forwards to a remote next hop even after its BGP peer's far-end forwarding path is lost, causing slow detection. That source case depends on: Bidirectional Forwarding Detection provides fast failure detection independent of routing protocol timers. The present issue is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. The more direct action is “A route can exist in the control-plane database without being successfully programmed for forwarding” because a route can exist in the control-plane database without being successfully programmed for forwarding.

C:

“EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination” responds to another technical or business failure: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. That source case depends on: EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination. The present issue is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. The more direct action is “A route can exist in the control-plane database without being successfully programmed for forwarding” because a route can exist in the control-plane database without being successfully programmed for forwarding.

D:

“Route installation depends on routing-instance scope and next-hop resolution as well as preference” responds to another technical or business failure: A backup static route takes over even though the preferred next hop is still reachable in the wrong VRF. That source case depends on: Route installation depends on routing-instance scope and next-hop resolution as well as preference. The present issue is: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. The more direct action is “A route can exist in the control-plane database without being successfully programmed for forwarding” because a route can exist in the control-plane database without being successfully programmed for forwarding.

Question 229

At fictional Northgate Services, a network engineer supporting head-office connectivity is reviewing BGP routing, path attributes and EVPN exchange during a new network integration (HCIP-H12-821-BGP-058). The observed network issue is: A route reflector receives a new external prefix but its clients cannot use the route because the advertised next hop is unreachable. Which observation most directly verifies that the corrective change succeeded?

  1. Invalid self-originated reflections are rejected and normal external prefixes propagate.
  2. RR clients install a usable route with a resolvable forwarding next hop.
  3. The BGP FSM reaches Established and exchanges the intended prefixes.
  4. Internal routers select the higher intended local-preference path while keeping next-hop reachability.

Explanation

Correct Answer

B:

The best verification observation is: RR clients install a usable route with a resolvable forwarding next hop. It demonstrates the corrective action: Ensure the reflected next-hop design is routable or apply justified next-hop policy at the correct boundary. This fits the principle: Route reflection distributes BGP paths but does not automatically repair next-hop reachability. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Invalid self-originated reflections are rejected and normal external prefixes propagate” responds to another technical or business failure: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. That source case depends on: The best verification observation is: Invalid self-originated reflections are rejected and normal external prefixes propagate. The present issue is: A route reflector receives a new external prefix but its clients cannot use the route because the advertised next hop is unreachable. The more direct action is “RR clients install a usable route with a resolvable forwarding next hop” because the best verification observation is: RR clients install a usable route with a resolvable forwarding next hop.

C:

“The BGP FSM reaches Established and exchanges the intended prefixes” responds to another technical or business failure: Two routers establish TCP connectivity but BGP stays in Active because the configured peer AS differs from the neighbor's actual AS. That source case depends on: The best verification observation is: The BGP FSM reaches Established and exchanges the intended prefixes. The present issue is: A route reflector receives a new external prefix but its clients cannot use the route because the advertised next hop is unreachable. The more direct action is “RR clients install a usable route with a resolvable forwarding next hop” because the best verification observation is: RR clients install a usable route with a resolvable forwarding next hop.

D:

“Internal routers select the higher intended local-preference path while keeping next-hop reachability” responds to another technical or business failure: Two external BGP exits learn the same remote prefix and a company needs consistent outbound preference inside the AS. That source case depends on: The best verification observation is: Internal routers select the higher intended local-preference path while keeping next-hop reachability. The present issue is: A route reflector receives a new external prefix but its clients cannot use the route because the advertised next hop is unreachable. The more direct action is “RR clients install a usable route with a resolvable forwarding next hop” because the best verification observation is: RR clients install a usable route with a resolvable forwarding next hop.

Question 230

At fictional Northgate Services, a network engineer supporting head-office connectivity is reviewing BGP routing, path attributes and EVPN exchange during a new network integration (HCIP-H12-821-BGP-058). The observed network issue is: A route reflector receives a new external prefix but its clients cannot use the route because the advertised next hop is unreachable. Which routing, switching, or network principle best explains the appropriate solution?

  1. Route reflection reduces iBGP full-mesh requirements through controlled reflection.
  2. Route reflection distributes BGP paths but does not automatically repair next-hop reachability.
  3. Standard iBGP split-horizon behavior limits readvertisement of iBGP-learned routes.
  4. IP reachability alone does not imply that BGP TCP transport is permitted.

Explanation

Correct Answer

B:

The governing principle is: Route reflection distributes BGP paths but does not automatically repair next-hop reachability. In this scenario, the appropriate action is: Ensure the reflected next-hop design is routable or apply justified next-hop policy at the correct boundary. Valid evidence would show: RR clients install a usable route with a resolvable forwarding next hop.

Incorrect Answers

A:

“Route reflection reduces iBGP full-mesh requirements through controlled reflection” responds to another technical or business failure: An enterprise has too many iBGP sessions and introduces a route reflector without identifying its client peers. That source case depends on: Route reflection reduces iBGP full-mesh requirements through controlled reflection. The present issue is: A route reflector receives a new external prefix but its clients cannot use the route because the advertised next hop is unreachable. The more direct action is “Route reflection distributes BGP paths but does not automatically repair next-hop reachability” because Route reflection distributes BGP paths but does not automatically repair next-hop reachability.

C:

“Standard iBGP split-horizon behavior limits readvertisement of iBGP-learned routes” responds to another technical or business failure: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. That source case depends on: Standard iBGP split-horizon behavior limits readvertisement of iBGP-learned routes. The present issue is: A route reflector receives a new external prefix but its clients cannot use the route because the advertised next hop is unreachable. The more direct action is “Route reflection distributes BGP paths but does not automatically repair next-hop reachability” because Route reflection distributes BGP paths but does not automatically repair next-hop reachability.

D:

“IP reachability alone does not imply that BGP TCP transport is permitted” responds to another technical or business failure: A border router can ping an eBGP peer yet session establishment fails because firewall ACL blocks TCP port 179. That source case depends on: IP reachability alone does not imply that BGP TCP transport is permitted. The present issue is: A route reflector receives a new external prefix but its clients cannot use the route because the advertised next hop is unreachable. The more direct action is “Route reflection distributes BGP paths but does not automatically repair next-hop reachability” because Route reflection distributes BGP paths but does not automatically repair next-hop reachability.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests