McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 38

Question 370

At fictional Timberline Operations, a network engineer supporting production campuses is reviewing Huawei network security and VPN isolation during a lab-to-production acceptance (HCIP-H12-821-SECURITY-093). The observed network issue is: An engineer enables IPsec encryption but never examines whether the protected tunnel permits excessive internal subnet access. Which next engineering action best addresses the reported problem?

  1. Migrate administration to supported SSH and control source access and logging.
  2. Examine stateful session creation, route symmetry and security policies instead of assuming stateless ACL behavior.
  3. Restrict tunnel selectors and post-decryption policies to required business applications.
  4. Correct firewall zone assignment and apply explicit permitted interzone access rules.

Explanation

Correct Answer

C:

The directly responsive action is: Restrict tunnel selectors and post-decryption policies to required business applications. The specific reported fault is: An engineer enables IPsec encryption but never examines whether the protected tunnel permits excessive internal subnet access. Confirmation should show: Authorized subnet pairs pass and unrelated internal segments remain inaccessible. The supporting technical principle is: VPN confidentiality and authorization scope are independent security requirements.

Incorrect Answers

A:

“Migrate administration to supported SSH and control source access and logging” responds to another technical or business failure: A router uses telnet for administration across an untrusted network and the team assumes its device password makes sessions confidential. That source case depends on: Cleartext administrative protocols can expose credentials and control activity. The present issue is: An engineer enables IPsec encryption but never examines whether the protected tunnel permits excessive internal subnet access. The more direct action is “Restrict tunnel selectors and post-decryption policies to required business applications” because VPN confidentiality and authorization scope are independent security requirements.

B:

“Examine stateful session creation, route symmetry and security policies instead of assuming stateless ACL behavior” responds to another technical or business failure: A Huawei firewall blocks a legitimate return packet even though the initiating client request was allowed by a separate ACL. That source case depends on: Stateful firewall enforcement relies on session context distinct from simple packet ACL filtering. The present issue is: An engineer enables IPsec encryption but never examines whether the protected tunnel permits excessive internal subnet access. The more direct action is “Restrict tunnel selectors and post-decryption policies to required business applications” because VPN confidentiality and authorization scope are independent security requirements.

D:

“Correct firewall zone assignment and apply explicit permitted interzone access rules” responds to another technical or business failure: A network places a server in a DMZ but mistakenly assigns its interface to the internal trust zone. That source case depends on: Security zones reflect interface trust boundaries used by policy evaluation. The present issue is: An engineer enables IPsec encryption but never examines whether the protected tunnel permits excessive internal subnet access. The more direct action is “Restrict tunnel selectors and post-decryption policies to required business applications” because VPN confidentiality and authorization scope are independent security requirements.

Question 371

At fictional Timberline Operations, a network engineer supporting production campuses is reviewing Huawei network security and VPN isolation during a lab-to-production acceptance (HCIP-H12-821-SECURITY-093). The observed network issue is: An engineer enables IPsec encryption but never examines whether the protected tunnel permits excessive internal subnet access. Which observation most directly verifies that the corrective change succeeded?

  1. Only approved management hosts can start authorized sessions to the device.
  2. An established authorized conversation has the expected state entry and response traffic succeeds.
  3. Authorized subnet pairs pass and unrelated internal segments remain inaccessible.
  4. Each tenant reaches only approved shared service prefixes without broad route exposure.

Explanation

Correct Answer

C:

The best verification observation is: Authorized subnet pairs pass and unrelated internal segments remain inaccessible. It demonstrates the corrective action: Restrict tunnel selectors and post-decryption policies to required business applications. This fits the principle: VPN confidentiality and authorization scope are independent security requirements. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Only approved management hosts can start authorized sessions to the device” responds to another technical or business failure: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. That source case depends on: The best verification observation is: Only approved management hosts can start authorized sessions to the device. The present issue is: An engineer enables IPsec encryption but never examines whether the protected tunnel permits excessive internal subnet access. The more direct action is “Authorized subnet pairs pass and unrelated internal segments remain inaccessible” because the best verification observation is: Authorized subnet pairs pass and unrelated internal segments remain inaccessible.

B:

“An established authorized conversation has the expected state entry and response traffic succeeds” responds to another technical or business failure: A Huawei firewall blocks a legitimate return packet even though the initiating client request was allowed by a separate ACL. That source case depends on: The best verification observation is: An established authorized conversation has the expected state entry and response traffic succeeds. The present issue is: An engineer enables IPsec encryption but never examines whether the protected tunnel permits excessive internal subnet access. The more direct action is “Authorized subnet pairs pass and unrelated internal segments remain inaccessible” because the best verification observation is: Authorized subnet pairs pass and unrelated internal segments remain inaccessible.

D:

“Each tenant reaches only approved shared service prefixes without broad route exposure” responds to another technical or business failure: An administrator creates VRFs but intentionally shared services cannot be reached because no controlled route import is configured. That source case depends on: The best verification observation is: Each tenant reaches only approved shared service prefixes without broad route exposure. The present issue is: An engineer enables IPsec encryption but never examines whether the protected tunnel permits excessive internal subnet access. The more direct action is “Authorized subnet pairs pass and unrelated internal segments remain inaccessible” because the best verification observation is: Authorized subnet pairs pass and unrelated internal segments remain inaccessible.

Question 372

At fictional Timberline Operations, a network engineer supporting production campuses is reviewing Huawei network security and VPN isolation during a lab-to-production acceptance (HCIP-H12-821-SECURITY-093). The observed network issue is: An engineer enables IPsec encryption but never examines whether the protected tunnel permits excessive internal subnet access. Which ongoing preventive or detective control would best reduce recurrence?

  1. Audit management source restrictions and session logs regularly.
  2. Audit permitted VPN destinations and interzone policies after adding remote sites.
  3. Test allowed and denied cross-VRF paths after sharing changes.
  4. Test relevant TCP and UDP service behavior when deploying transport filters.

Explanation

Correct Answer

B:

The preventive or detective safeguard is: Audit permitted VPN destinations and interzone policies after adding remote sites. This directly addresses the recurring fault: An engineer enables IPsec encryption but never examines whether the protected tunnel permits excessive internal subnet access. The corrective action would be: Restrict tunnel selectors and post-decryption policies to required business applications. Success is demonstrated when: Authorized subnet pairs pass and unrelated internal segments remain inaccessible.

Incorrect Answers

A:

“Audit management source restrictions and session logs regularly” addresses recurrence of another problem: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. That problem depends on: The preventive or detective safeguard is: Audit management source restrictions and session logs regularly. The recurring risk here is: An engineer enables IPsec encryption but never examines whether the protected tunnel permits excessive internal subnet access. The more targeted safeguard is “Audit permitted VPN destinations and interzone policies after adding remote sites” because the preventive or detective safeguard is: Audit permitted VPN destinations and interzone policies after adding remote sites.

C:

“Test allowed and denied cross-VRF paths after sharing changes” addresses recurrence of another problem: An administrator creates VRFs but intentionally shared services cannot be reached because no controlled route import is configured. That problem depends on: The preventive or detective safeguard is: Test allowed and denied cross-VRF paths after sharing changes. The recurring risk here is: An engineer enables IPsec encryption but never examines whether the protected tunnel permits excessive internal subnet access. The more targeted safeguard is “Audit permitted VPN destinations and interzone policies after adding remote sites” because the preventive or detective safeguard is: Audit permitted VPN destinations and interzone policies after adding remote sites.

D:

“Test relevant TCP and UDP service behavior when deploying transport filters” addresses recurrence of another problem: An edge ACL denies DNS over UDP while applications switch to TCP DNS and an operator considers the hostname filtering complete. That problem depends on: The preventive or detective safeguard is: Test relevant TCP and UDP service behavior when deploying transport filters. The recurring risk here is: An engineer enables IPsec encryption but never examines whether the protected tunnel permits excessive internal subnet access. The more targeted safeguard is “Audit permitted VPN destinations and interzone policies after adding remote sites” because the preventive or detective safeguard is: Audit permitted VPN destinations and interzone policies after adding remote sites.

Question 373

At fictional Lakeshore Finance, a network engineer supporting transaction systems is reviewing RSTP, MSTP and switching interconnects during a customer network audit (HCIP-H12-821-SWITCH-094). The observed network issue is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. Which next engineering action best addresses the reported problem?

  1. Align stack member identities, link topology and compatible software and hardware requirements.
  2. Set deliberate bridge priority and verify the elected root and port roles across the VLAN.
  3. Design MST instance-to-VLAN mapping and align region configuration on participating switches.
  4. Treat spanning-tree topology and gateway redundancy as distinct design decisions.

Explanation

Correct Answer

D:

The directly responsive action is: Treat spanning-tree topology and gateway redundancy as distinct design decisions. The specific reported fault is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. Confirmation should show: Layer-2 forwarding and the layer-3 active gateway each follow their own intended owner. The supporting technical principle is: Spanning tree and default-gateway failover are independent control mechanisms.

Incorrect Answers

A:

“Align stack member identities, link topology and compatible software and hardware requirements” responds to another technical or business failure: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. That source case depends on: Switch stacking creates a logical control relationship from compatible physical members. The present issue is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. The more direct action is “Treat spanning-tree topology and gateway redundancy as distinct design decisions” because Spanning tree and default-gateway failover are independent control mechanisms.

B:

“Set deliberate bridge priority and verify the elected root and port roles across the VLAN” responds to another technical or business failure: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. That source case depends on: STP root election uses bridge identifier priorities and MAC tie-breaking. The present issue is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. The more direct action is “Treat spanning-tree topology and gateway redundancy as distinct design decisions” because Spanning tree and default-gateway failover are independent control mechanisms.

C:

“Design MST instance-to-VLAN mapping and align region configuration on participating switches” responds to another technical or business failure: A network requires multiple spanning-tree topologies but maps all VLANs into one MST instance. That source case depends on: MSTP permits multiple VLANs to share explicitly defined spanning-tree instances. The present issue is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. The more direct action is “Treat spanning-tree topology and gateway redundancy as distinct design decisions” because Spanning tree and default-gateway failover are independent control mechanisms.

Question 374

At fictional Lakeshore Finance, a network engineer supporting transaction systems is reviewing RSTP, MSTP and switching interconnects during a customer network audit (HCIP-H12-821-SWITCH-094). The observed network issue is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. Which routing, switching, or network principle best explains the appropriate solution?

  1. Stack resiliency requires deliberate master election and partition handling.
  2. A switch forwarding domain is determined by VLAN tagging and port membership.
  3. Spanning tree prevents layer-2 loops while retaining redundant physical links.
  4. Spanning tree and default-gateway failover are independent control mechanisms.

Explanation

Correct Answer

D:

The governing principle is: Spanning tree and default-gateway failover are independent control mechanisms. In this scenario, the appropriate action is: Treat spanning-tree topology and gateway redundancy as distinct design decisions. Valid evidence would show: Layer-2 forwarding and the layer-3 active gateway each follow their own intended owner.

Incorrect Answers

A:

“Stack resiliency requires deliberate master election and partition handling” responds to another technical or business failure: An iStack link fails and an engineer assumes the remaining members will always preserve a single partition-free control plane. That source case depends on: Stack resiliency requires deliberate master election and partition handling. The present issue is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. The more direct action is “Spanning tree and default-gateway failover are independent control mechanisms” because Spanning tree and default-gateway failover are independent control mechanisms.

B:

“A switch forwarding domain is determined by VLAN tagging and port membership” responds to another technical or business failure: Users from two access VLANs unexpectedly communicate at layer 2 because the same port VLAN was configured on both groups. That source case depends on: A switch forwarding domain is determined by VLAN tagging and port membership. The present issue is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. The more direct action is “Spanning tree and default-gateway failover are independent control mechanisms” because Spanning tree and default-gateway failover are independent control mechanisms.

C:

“Spanning tree prevents layer-2 loops while retaining redundant physical links” responds to another technical or business failure: An Ethernet campus has a physical loop but engineers disable spanning tree to reduce convergence delay. That source case depends on: Spanning tree prevents layer-2 loops while retaining redundant physical links. The present issue is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. The more direct action is “Spanning tree and default-gateway failover are independent control mechanisms” because Spanning tree and default-gateway failover are independent control mechanisms.

Question 375

At fictional Lakeshore Finance, a network engineer supporting transaction systems is reviewing RSTP, MSTP and switching interconnects during a customer network audit (HCIP-H12-821-SWITCH-094). The observed network issue is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. Which ongoing preventive or detective control would best reduce recurrence?

  1. Audit edge-port classification and BPDU protection after topology changes.
  2. Check spanning-tree topology and loop guards before adding dual uplinks.
  3. Test VLAN loop avoidance and default gateway failover separately.
  4. Check trunk VLAN allowlists during new segment deployment.

Explanation

Correct Answer

C:

The preventive or detective safeguard is: Test VLAN loop avoidance and default gateway failover separately. This directly addresses the recurring fault: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. The corrective action would be: Treat spanning-tree topology and gateway redundancy as distinct design decisions. Success is demonstrated when: Layer-2 forwarding and the layer-3 active gateway each follow their own intended owner.

Incorrect Answers

A:

“Audit edge-port classification and BPDU protection after topology changes” addresses recurrence of another problem: An engineer places an edge-port setting on a trunk toward another switch and an unexpected BPDU enters the network. That problem depends on: The preventive or detective safeguard is: Audit edge-port classification and BPDU protection after topology changes. The recurring risk here is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. The more targeted safeguard is “Test VLAN loop avoidance and default gateway failover separately” because the preventive or detective safeguard is: Test VLAN loop avoidance and default gateway failover separately.

B:

“Check spanning-tree topology and loop guards before adding dual uplinks” addresses recurrence of another problem: An Ethernet campus has a physical loop but engineers disable spanning tree to reduce convergence delay. That problem depends on: The preventive or detective safeguard is: Check spanning-tree topology and loop guards before adding dual uplinks. The recurring risk here is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. The more targeted safeguard is “Test VLAN loop avoidance and default gateway failover separately” because the preventive or detective safeguard is: Test VLAN loop avoidance and default gateway failover separately.

D:

“Check trunk VLAN allowlists during new segment deployment” addresses recurrence of another problem: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. That problem depends on: The preventive or detective safeguard is: Check trunk VLAN allowlists during new segment deployment. The recurring risk here is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. The more targeted safeguard is “Test VLAN loop avoidance and default gateway failover separately” because the preventive or detective safeguard is: Test VLAN loop avoidance and default gateway failover separately.

Question 376

At fictional Lakeshore Finance, a network engineer supporting transaction systems is reviewing RSTP, MSTP and switching interconnects during a customer network audit (HCIP-H12-821-SWITCH-094). The observed network issue is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. Which observation most directly verifies that the corrective change succeeded?

  1. Layer-2 forwarding and the layer-3 active gateway each follow their own intended owner.
  2. One redundant path is blocked as intended and connectivity survives an approved link failure.
  3. The trunk participates in correct RSTP convergence and risky edge behavior is blocked.
  4. Each test endpoint is learned in its intended VLAN and cross-VLAN forwarding requires a gateway.

Explanation

Correct Answer

A:

The best verification observation is: Layer-2 forwarding and the layer-3 active gateway each follow their own intended owner. It demonstrates the corrective action: Treat spanning-tree topology and gateway redundancy as distinct design decisions. This fits the principle: Spanning tree and default-gateway failover are independent control mechanisms. Verify on the actual Huawei platform and network release.

Incorrect Answers

B:

“One redundant path is blocked as intended and connectivity survives an approved link failure” responds to another technical or business failure: An Ethernet campus has a physical loop but engineers disable spanning tree to reduce convergence delay. That source case depends on: The best verification observation is: One redundant path is blocked as intended and connectivity survives an approved link failure. The present issue is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. The more direct action is “Layer-2 forwarding and the layer-3 active gateway each follow their own intended owner” because the best verification observation is: Layer-2 forwarding and the layer-3 active gateway each follow their own intended owner.

C:

“The trunk participates in correct RSTP convergence and risky edge behavior is blocked” responds to another technical or business failure: An engineer places an edge-port setting on a trunk toward another switch and an unexpected BPDU enters the network. That source case depends on: The best verification observation is: The trunk participates in correct RSTP convergence and risky edge behavior is blocked. The present issue is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. The more direct action is “Layer-2 forwarding and the layer-3 active gateway each follow their own intended owner” because the best verification observation is: Layer-2 forwarding and the layer-3 active gateway each follow their own intended owner.

D:

“Each test endpoint is learned in its intended VLAN and cross-VLAN forwarding requires a gateway” responds to another technical or business failure: Users from two access VLANs unexpectedly communicate at layer 2 because the same port VLAN was configured on both groups. That source case depends on: The best verification observation is: Each test endpoint is learned in its intended VLAN and cross-VLAN forwarding requires a gateway. The present issue is: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. The more direct action is “Layer-2 forwarding and the layer-3 active gateway each follow their own intended owner” because the best verification observation is: Layer-2 forwarding and the layer-3 active gateway each follow their own intended owner.

Question 377

At fictional Summit Agriculture, a network engineer supporting remote rural branches is reviewing RSTP, MSTP and switching interconnects during a baseline compliance test (HCIP-H12-821-SWITCH-095). The observed network issue is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. Which observation most directly verifies that the corrective change succeeded?

  1. One redundant path is blocked as intended and connectivity survives an approved link failure.
  2. Each test endpoint is learned in its intended VLAN and cross-VLAN forwarding requires a gateway.
  3. The remaining stack behaves predictably and avoids simultaneous unauthorized active masters.
  4. Both members appear in one stable logical stack with correct master and standby roles.

Explanation

Correct Answer

D:

The best verification observation is: Both members appear in one stable logical stack with correct master and standby roles. It demonstrates the corrective action: Align stack member identities, link topology and compatible software and hardware requirements. This fits the principle: Switch stacking creates a logical control relationship from compatible physical members. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“One redundant path is blocked as intended and connectivity survives an approved link failure” responds to another technical or business failure: An Ethernet campus has a physical loop but engineers disable spanning tree to reduce convergence delay. That source case depends on: The best verification observation is: One redundant path is blocked as intended and connectivity survives an approved link failure. The present issue is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. The more direct action is “Both members appear in one stable logical stack with correct master and standby roles” because the best verification observation is: Both members appear in one stable logical stack with correct master and standby roles.

B:

“Each test endpoint is learned in its intended VLAN and cross-VLAN forwarding requires a gateway” responds to another technical or business failure: Users from two access VLANs unexpectedly communicate at layer 2 because the same port VLAN was configured on both groups. That source case depends on: The best verification observation is: Each test endpoint is learned in its intended VLAN and cross-VLAN forwarding requires a gateway. The present issue is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. The more direct action is “Both members appear in one stable logical stack with correct master and standby roles” because the best verification observation is: Both members appear in one stable logical stack with correct master and standby roles.

C:

“The remaining stack behaves predictably and avoids simultaneous unauthorized active masters” responds to another technical or business failure: An iStack link fails and an engineer assumes the remaining members will always preserve a single partition-free control plane. That source case depends on: The best verification observation is: The remaining stack behaves predictably and avoids simultaneous unauthorized active masters. The present issue is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. The more direct action is “Both members appear in one stable logical stack with correct master and standby roles” because the best verification observation is: Both members appear in one stable logical stack with correct master and standby roles.

Question 378

At fictional Summit Agriculture, a network engineer supporting remote rural branches is reviewing RSTP, MSTP and switching interconnects during a baseline compliance test (HCIP-H12-821-SWITCH-095). The observed network issue is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. Which routing, switching, or network principle best explains the appropriate solution?

  1. Multiple physical switching paths must have coherent loop and aggregation control.
  2. MST region membership depends on a consistent configuration digest, not merely a label.
  3. Switch stacking creates a logical control relationship from compatible physical members.
  4. A switch forwarding domain is determined by VLAN tagging and port membership.

Explanation

Correct Answer

C:

The governing principle is: Switch stacking creates a logical control relationship from compatible physical members. In this scenario, the appropriate action is: Align stack member identities, link topology and compatible software and hardware requirements. Valid evidence would show: Both members appear in one stable logical stack with correct master and standby roles.

Incorrect Answers

A:

“Multiple physical switching paths must have coherent loop and aggregation control” responds to another technical or business failure: A downstream aggregation switch sees duplicate MAC flaps after a switch cluster is formed without consistent cross-device link aggregation. That source case depends on: Multiple physical switching paths must have coherent loop and aggregation control. The present issue is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. The more direct action is “Switch stacking creates a logical control relationship from compatible physical members” because Switch stacking creates a logical control relationship from compatible physical members.

B:

“MST region membership depends on a consistent configuration digest, not merely a label” responds to another technical or business failure: MSTP neighbors appear in different regions despite using the same region name because their VLAN mappings differ. That source case depends on: MST region membership depends on a consistent configuration digest, not merely a label. The present issue is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. The more direct action is “Switch stacking creates a logical control relationship from compatible physical members” because Switch stacking creates a logical control relationship from compatible physical members.

D:

“A switch forwarding domain is determined by VLAN tagging and port membership” responds to another technical or business failure: Users from two access VLANs unexpectedly communicate at layer 2 because the same port VLAN was configured on both groups. That source case depends on: A switch forwarding domain is determined by VLAN tagging and port membership. The present issue is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. The more direct action is “Switch stacking creates a logical control relationship from compatible physical members” because Switch stacking creates a logical control relationship from compatible physical members.

Question 379

At fictional Summit Agriculture, a network engineer supporting remote rural branches is reviewing RSTP, MSTP and switching interconnects during a baseline compliance test (HCIP-H12-821-SWITCH-095). The observed network issue is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. Which ongoing preventive or detective control would best reduce recurrence?

  1. Validate stack member IDs and interconnect cabling before joining production.
  2. Audit access-port PVID assignments after desk and switch moves.
  3. Verify cross-member link aggregation and MAC movement under failover.
  4. Compare MST region name, revision and VLAN-to-instance mapping before deployment.

Explanation

Correct Answer

A:

The preventive or detective safeguard is: Validate stack member IDs and interconnect cabling before joining production. This directly addresses the recurring fault: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. The corrective action would be: Align stack member identities, link topology and compatible software and hardware requirements. Success is demonstrated when: Both members appear in one stable logical stack with correct master and standby roles.

Incorrect Answers

B:

“Audit access-port PVID assignments after desk and switch moves” addresses recurrence of another problem: Users from two access VLANs unexpectedly communicate at layer 2 because the same port VLAN was configured on both groups. That problem depends on: The preventive or detective safeguard is: Audit access-port PVID assignments after desk and switch moves. The recurring risk here is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. The more targeted safeguard is “Validate stack member IDs and interconnect cabling before joining production” because the preventive or detective safeguard is: Validate stack member IDs and interconnect cabling before joining production.

C:

“Verify cross-member link aggregation and MAC movement under failover” addresses recurrence of another problem: A downstream aggregation switch sees duplicate MAC flaps after a switch cluster is formed without consistent cross-device link aggregation. That problem depends on: The preventive or detective safeguard is: Verify cross-member link aggregation and MAC movement under failover. The recurring risk here is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. The more targeted safeguard is “Validate stack member IDs and interconnect cabling before joining production” because the preventive or detective safeguard is: Validate stack member IDs and interconnect cabling before joining production.

D:

“Compare MST region name, revision and VLAN-to-instance mapping before deployment” addresses recurrence of another problem: A network requires multiple spanning-tree topologies but maps all VLANs into one MST instance. That problem depends on: The preventive or detective safeguard is: Compare MST region name, revision and VLAN-to-instance mapping before deployment. The recurring risk here is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. The more targeted safeguard is “Validate stack member IDs and interconnect cabling before joining production” because the preventive or detective safeguard is: Validate stack member IDs and interconnect cabling before joining production.

Question 380

At fictional Summit Agriculture, a network engineer supporting remote rural branches is reviewing RSTP, MSTP and switching interconnects during a baseline compliance test (HCIP-H12-821-SWITCH-095). The observed network issue is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. Which next engineering action best addresses the reported problem?

  1. Check split-brain prevention mechanisms and stack topology supported by the platform.
  2. Align stack member identities, link topology and compatible software and hardware requirements.
  3. Remove inappropriate edge-port assumptions and enforce supported BPDU protection policy.
  4. Permit the intended tagged VLAN on both sides of the trunk without broadening unrelated VLAN access.

Explanation

Correct Answer

B:

The directly responsive action is: Align stack member identities, link topology and compatible software and hardware requirements. The specific reported fault is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. Confirmation should show: Both members appear in one stable logical stack with correct master and standby roles. The supporting technical principle is: Switch stacking creates a logical control relationship from compatible physical members.

Incorrect Answers

A:

“Check split-brain prevention mechanisms and stack topology supported by the platform” responds to another technical or business failure: An iStack link fails and an engineer assumes the remaining members will always preserve a single partition-free control plane. That source case depends on: Stack resiliency requires deliberate master election and partition handling. The present issue is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. The more direct action is “Align stack member identities, link topology and compatible software and hardware requirements” because Switch stacking creates a logical control relationship from compatible physical members.

C:

“Remove inappropriate edge-port assumptions and enforce supported BPDU protection policy” responds to another technical or business failure: An engineer places an edge-port setting on a trunk toward another switch and an unexpected BPDU enters the network. That source case depends on: Edge-port optimizations are intended for endpoint-facing links rather than switch-to-switch trunks. The present issue is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. The more direct action is “Align stack member identities, link topology and compatible software and hardware requirements” because Switch stacking creates a logical control relationship from compatible physical members.

D:

“Permit the intended tagged VLAN on both sides of the trunk without broadening unrelated VLAN access” responds to another technical or business failure: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. That source case depends on: VLAN trunking requires explicit compatible tagging and allowed membership. The present issue is: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. The more direct action is “Align stack member identities, link topology and compatible software and hardware requirements” because Switch stacking creates a logical control relationship from compatible physical members.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests