McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 47

Question 460

At fictional Northgate Services, a network engineer supporting head-office connectivity is reviewing router control and forwarding planes during a new network integration (HCIP-H12-821-ROUTING-115). The observed network issue is: A modular router has working interfaces but its line card forwarding statistics remain idle while the control CPU handles route updates. Which routing, switching, or network principle best explains the appropriate solution?

  1. A route can exist in the control-plane database without being successfully programmed for forwarding.
  2. WLAN roaming outcomes depend on consistent client network mapping and mobility design.
  3. Enterprise WLAN admission can use centralized identity authorization rather than shared open access.
  4. Route calculation and data-plane packet forwarding are distinct activities on network devices.

Explanation

Correct Answer

D:

The governing principle is: Route calculation and data-plane packet forwarding are distinct activities on network devices. In this scenario, the appropriate action is: Separate control-plane route processing from forwarding-plane packet lookups and inspect hardware forwarding installation. Valid evidence would show: The RIB selects the intended route and the forwarding table has a corresponding installed next hop.

Incorrect Answers

A:

“A route can exist in the control-plane database without being successfully programmed for forwarding” responds to another technical or business failure: A network operator believes a route present in the routing information base must already be programmed into every forwarding ASIC. That source case depends on: A route can exist in the control-plane database without being successfully programmed for forwarding. The present issue is: A modular router has working interfaces but its line card forwarding statistics remain idle while the control CPU handles route updates. The more direct action is “Route calculation and data-plane packet forwarding are distinct activities on network devices” because Route calculation and data-plane packet forwarding are distinct activities on network devices.

B:

“WLAN roaming outcomes depend on consistent client network mapping and mobility design” responds to another technical or business failure: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. That source case depends on: WLAN roaming outcomes depend on consistent client network mapping and mobility design. The present issue is: A modular router has working interfaces but its line card forwarding statistics remain idle while the control CPU handles route updates. The more direct action is “Route calculation and data-plane packet forwarding are distinct activities on network devices” because Route calculation and data-plane packet forwarding are distinct activities on network devices.

C:

“Enterprise WLAN admission can use centralized identity authorization rather than shared open access” responds to another technical or business failure: An SSID uses open authentication despite organizational requirements for enterprise identity verification. That source case depends on: Enterprise WLAN admission can use centralized identity authorization rather than shared open access. The present issue is: A modular router has working interfaces but its line card forwarding statistics remain idle while the control CPU handles route updates. The more direct action is “Route calculation and data-plane packet forwarding are distinct activities on network devices” because Route calculation and data-plane packet forwarding are distinct activities on network devices.

Question 461

At fictional Dovetail University, a network engineer supporting campus routing is reviewing controller-managed enterprise WLAN during a controlled failover exercise (HCIP-H12-821-WLAN-116). The observed network issue is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. Which ongoing preventive or detective control would best reduce recurrence?

  1. Record RF occupancy and client performance after adding new APs.
  2. Forecast client concurrency and pool utilization before large events.
  3. Verify RF design through client roaming tests in dense locations.
  4. Test same-SSID roaming across all intended coverage and VLAN boundaries.

Explanation

Correct Answer

B:

The preventive or detective safeguard is: Forecast client concurrency and pool utilization before large events. This directly addresses the recurring fault: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. The corrective action would be: Design WLAN VLAN pooling and appropriately sized DHCP scopes for the intended client population. Success is demonstrated when: New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits.

Incorrect Answers

A:

“Record RF occupancy and client performance after adding new APs” addresses recurrence of another problem: A large warehouse WLAN appears healthy but clients disconnect during a channel change because radios suffer co-channel congestion. That problem depends on: The preventive or detective safeguard is: Record RF occupancy and client performance after adding new APs. The recurring risk here is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. The more targeted safeguard is “Forecast client concurrency and pool utilization before large events” because the preventive or detective safeguard is: Forecast client concurrency and pool utilization before large events.

C:

“Verify RF design through client roaming tests in dense locations” addresses recurrence of another problem: A Wi-Fi deployment applies identical power levels in a dense conference center and clients roam unpredictably to distant APs. That problem depends on: The preventive or detective safeguard is: Verify RF design through client roaming tests in dense locations. The recurring risk here is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. The more targeted safeguard is “Forecast client concurrency and pool utilization before large events” because the preventive or detective safeguard is: Forecast client concurrency and pool utilization before large events.

D:

“Test same-SSID roaming across all intended coverage and VLAN boundaries” addresses recurrence of another problem: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. That problem depends on: The preventive or detective safeguard is: Test same-SSID roaming across all intended coverage and VLAN boundaries. The recurring risk here is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. The more targeted safeguard is “Forecast client concurrency and pool utilization before large events” because the preventive or detective safeguard is: Forecast client concurrency and pool utilization before large events.

Question 462

At fictional Dovetail University, a network engineer supporting campus routing is reviewing controller-managed enterprise WLAN during a controlled failover exercise (HCIP-H12-821-WLAN-116). The observed network issue is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. Which routing, switching, or network principle best explains the appropriate solution?

  1. WLAN centralized management requires a healthy control channel independent of user radio frames.
  2. WLAN roaming outcomes depend on consistent client network mapping and mobility design.
  3. Centrally managed WLAN APs depend on controller discovery and CAPWAP control connectivity.
  4. VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments.

Explanation

Correct Answer

D:

The governing principle is: VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments. In this scenario, the appropriate action is: Design WLAN VLAN pooling and appropriately sized DHCP scopes for the intended client population. Valid evidence would show: New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits.

Incorrect Answers

A:

“WLAN centralized management requires a healthy control channel independent of user radio frames” responds to another technical or business failure: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. That source case depends on: WLAN centralized management requires a healthy control channel independent of user radio frames. The present issue is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. The more direct action is “VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments” because VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments.

B:

“WLAN roaming outcomes depend on consistent client network mapping and mobility design” responds to another technical or business failure: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. That source case depends on: WLAN roaming outcomes depend on consistent client network mapping and mobility design. The present issue is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. The more direct action is “VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments” because VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments.

C:

“Centrally managed WLAN APs depend on controller discovery and CAPWAP control connectivity” responds to another technical or business failure: A large Huawei WLAN has many access points but a new AP cannot register because it discovers the wrong wireless controller. That source case depends on: Centrally managed WLAN APs depend on controller discovery and CAPWAP control connectivity. The present issue is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. The more direct action is “VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments” because VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments.

Question 463

At fictional Dovetail University, a network engineer supporting campus routing is reviewing controller-managed enterprise WLAN during a controlled failover exercise (HCIP-H12-821-WLAN-116). The observed network issue is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. Which next engineering action best addresses the reported problem?

  1. Align approved SSID-to-VLAN and roaming architecture across relevant AP groups.
  2. Design WLAN VLAN pooling and appropriately sized DHCP scopes for the intended client population.
  3. Integrate supported WLAN access control or NAC posture policy with identity decisions.
  4. Design supported AC redundancy and AP failover behavior and verify its licensing and topology.

Explanation

Correct Answer

B:

The directly responsive action is: Design WLAN VLAN pooling and appropriately sized DHCP scopes for the intended client population. The specific reported fault is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. Confirmation should show: New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits. The supporting technical principle is: VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments.

Incorrect Answers

A:

“Align approved SSID-to-VLAN and roaming architecture across relevant AP groups” responds to another technical or business failure: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. That source case depends on: WLAN roaming outcomes depend on consistent client network mapping and mobility design. The present issue is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. The more direct action is “Design WLAN VLAN pooling and appropriately sized DHCP scopes for the intended client population” because VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments.

C:

“Integrate supported WLAN access control or NAC posture policy with identity decisions” responds to another technical or business failure: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. That source case depends on: Wireless authentication and security posture authorization solve different access-control requirements. The present issue is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. The more direct action is “Design WLAN VLAN pooling and appropriately sized DHCP scopes for the intended client population” because VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments.

D:

“Design supported AC redundancy and AP failover behavior and verify its licensing and topology” responds to another technical or business failure: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. That source case depends on: Centralized WLAN control needs deliberate high availability and AP failover planning. The present issue is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. The more direct action is “Design WLAN VLAN pooling and appropriately sized DHCP scopes for the intended client population” because VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments.

Question 464

At fictional Dovetail University, a network engineer supporting campus routing is reviewing controller-managed enterprise WLAN during a controlled failover exercise (HCIP-H12-821-WLAN-116). The observed network issue is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. Which observation most directly verifies that the corrective change succeeded?

  1. Compliant devices enter the intended access role and unapproved devices receive a restricted result.
  2. The AP establishes its authorized controller session and downloads the intended configuration.
  3. Roaming clients retain suitable network continuity or follow documented subnet mobility behavior.
  4. New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits.

Explanation

Correct Answer

D:

The best verification observation is: New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits. It demonstrates the corrective action: Design WLAN VLAN pooling and appropriately sized DHCP scopes for the intended client population. This fits the principle: VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Compliant devices enter the intended access role and unapproved devices receive a restricted result” responds to another technical or business failure: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. That source case depends on: The best verification observation is: Compliant devices enter the intended access role and unapproved devices receive a restricted result. The present issue is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. The more direct action is “New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits” because the best verification observation is: New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits.

B:

“The AP establishes its authorized controller session and downloads the intended configuration” responds to another technical or business failure: A large Huawei WLAN has many access points but a new AP cannot register because it discovers the wrong wireless controller. That source case depends on: The best verification observation is: The AP establishes its authorized controller session and downloads the intended configuration. The present issue is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. The more direct action is “New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits” because the best verification observation is: New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits.

C:

“Roaming clients retain suitable network continuity or follow documented subnet mobility behavior” responds to another technical or business failure: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. That source case depends on: The best verification observation is: Roaming clients retain suitable network continuity or follow documented subnet mobility behavior. The present issue is: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. The more direct action is “New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits” because the best verification observation is: New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits.

Question 465

At fictional Northgate Services, a network engineer supporting head-office connectivity is reviewing IS-IS level-aware topology and database synchronization during a post-maintenance incident review (HCIP-H12-821-ISIS-117). The observed network issue is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. Which observation most directly verifies that the corrective change succeeded?

  1. The link establishes a valid Level 2 adjacency and exchanges the permitted routes.
  2. Adjacent routers converge on consistent current LSP contents and route tables.
  3. The Level 1 device installs a valid route toward its local Level 1/2 router.
  4. The required IPv4 prefix appears through the intended IS-IS route in the RIB and FIB.

Explanation

Correct Answer

A:

The best verification observation is: The link establishes a valid Level 2 adjacency and exchanges the permitted routes. It demonstrates the corrective action: Align interface circuit-level settings with the intended Level 2 topology. This fits the principle: IS-IS adjacency level selection determines which databases neighbors can share. Verify on the actual Huawei platform and network release.

Incorrect Answers

B:

“Adjacent routers converge on consistent current LSP contents and route tables” responds to another technical or business failure: An IS-IS area contains conflicting LSP versions after connectivity flaps and routers disagree about routes. That source case depends on: The best verification observation is: Adjacent routers converge on consistent current LSP contents and route tables. The present issue is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. The more direct action is “The link establishes a valid Level 2 adjacency and exchanges the permitted routes” because the best verification observation is: The link establishes a valid Level 2 adjacency and exchanges the permitted routes.

C:

“The Level 1 device installs a valid route toward its local Level 1/2 router” responds to another technical or business failure: A Level 1-only router cannot reach an IP prefix advertised only outside its local IS-IS area. That source case depends on: The best verification observation is: The Level 1 device installs a valid route toward its local Level 1/2 router. The present issue is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. The more direct action is “The link establishes a valid Level 2 adjacency and exchanges the permitted routes” because the best verification observation is: The link establishes a valid Level 2 adjacency and exchanges the permitted routes.

D:

“The required IPv4 prefix appears through the intended IS-IS route in the RIB and FIB” responds to another technical or business failure: An IS-IS neighbor forms correctly but the expected IPv4 destination never appears in downstream route tables. That source case depends on: The best verification observation is: The required IPv4 prefix appears through the intended IS-IS route in the RIB and FIB. The present issue is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. The more direct action is “The link establishes a valid Level 2 adjacency and exchanges the permitted routes” because the best verification observation is: The link establishes a valid Level 2 adjacency and exchanges the permitted routes.

Question 466

At fictional Northgate Services, a network engineer supporting head-office connectivity is reviewing IS-IS level-aware topology and database synchronization during a post-maintenance incident review (HCIP-H12-821-ISIS-117). The observed network issue is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. Which routing, switching, or network principle best explains the appropriate solution?

  1. IS-IS routing integrity can require compatible authentication at the relevant PDU scope.
  2. IS-IS adjacency level selection determines which databases neighbors can share.
  3. IS-IS LAN DIS behavior differs from OSPF designated-router adjacency handling.
  4. IS-IS DIS elections are a broadcast-LAN behavior, not a point-to-point requirement.

Explanation

Correct Answer

B:

The governing principle is: IS-IS adjacency level selection determines which databases neighbors can share. In this scenario, the appropriate action is: Align interface circuit-level settings with the intended Level 2 topology. Valid evidence would show: The link establishes a valid Level 2 adjacency and exchanges the permitted routes.

Incorrect Answers

A:

“IS-IS routing integrity can require compatible authentication at the relevant PDU scope” responds to another technical or business failure: An IS-IS adjacency repeatedly resets because neighboring devices use incompatible authentication settings. That source case depends on: IS-IS routing integrity can require compatible authentication at the relevant PDU scope. The present issue is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. The more direct action is “IS-IS adjacency level selection determines which databases neighbors can share” because IS-IS adjacency level selection determines which databases neighbors can share.

C:

“IS-IS LAN DIS behavior differs from OSPF designated-router adjacency handling” responds to another technical or business failure: An IS-IS router is elected designated intermediate system on an Ethernet segment but an engineer calls it an OSPF DR. That source case depends on: IS-IS LAN DIS behavior differs from OSPF designated-router adjacency handling. The present issue is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. The more direct action is “IS-IS adjacency level selection determines which databases neighbors can share” because IS-IS adjacency level selection determines which databases neighbors can share.

D:

“IS-IS DIS elections are a broadcast-LAN behavior, not a point-to-point requirement” responds to another technical or business failure: An engineer expects every IS-IS point-to-point interface to elect a LAN designated intermediate system. That source case depends on: IS-IS DIS elections are a broadcast-LAN behavior, not a point-to-point requirement. The present issue is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. The more direct action is “IS-IS adjacency level selection determines which databases neighbors can share” because IS-IS adjacency level selection determines which databases neighbors can share.

Question 467

At fictional Northgate Services, a network engineer supporting head-office connectivity is reviewing IS-IS level-aware topology and database synchronization during a post-maintenance incident review (HCIP-H12-821-ISIS-117). The observed network issue is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. Which next engineering action best addresses the reported problem?

  1. Permit the appropriate IS-IS link-layer PDUs and check physical segment connectivity.
  2. Align interface circuit-level settings with the intended Level 2 topology.
  3. Examine the L1/L2 router's attached-state behavior and desired inter-area default routing.
  4. Configure matching supported IS-IS Hello or LSP authentication parameters for the peering scope.

Explanation

Correct Answer

B:

The directly responsive action is: Align interface circuit-level settings with the intended Level 2 topology. The specific reported fault is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. Confirmation should show: The link establishes a valid Level 2 adjacency and exchanges the permitted routes. The supporting technical principle is: IS-IS adjacency level selection determines which databases neighbors can share.

Incorrect Answers

A:

“Permit the appropriate IS-IS link-layer PDUs and check physical segment connectivity” responds to another technical or business failure: IS-IS adjacency remains Down when Hello frames are filtered by an intermediate layer-2 device. That source case depends on: IS-IS exchanges routing PDUs directly over the link rather than using ordinary IP multicast transport. The present issue is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. The more direct action is “Align interface circuit-level settings with the intended Level 2 topology” because IS-IS adjacency level selection determines which databases neighbors can share.

C:

“Examine the L1/L2 router's attached-state behavior and desired inter-area default routing” responds to another technical or business failure: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. That source case depends on: IS-IS attached-bit behavior can influence Level 1 routing toward other areas. The present issue is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. The more direct action is “Align interface circuit-level settings with the intended Level 2 topology” because IS-IS adjacency level selection determines which databases neighbors can share.

D:

“Configure matching supported IS-IS Hello or LSP authentication parameters for the peering scope” responds to another technical or business failure: An IS-IS adjacency repeatedly resets because neighboring devices use incompatible authentication settings. That source case depends on: IS-IS routing integrity can require compatible authentication at the relevant PDU scope. The present issue is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. The more direct action is “Align interface circuit-level settings with the intended Level 2 topology” because IS-IS adjacency level selection determines which databases neighbors can share.

Question 468

At fictional Northgate Services, a network engineer supporting head-office connectivity is reviewing IS-IS level-aware topology and database synchronization during a post-maintenance incident review (HCIP-H12-821-ISIS-117). The observed network issue is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. Which ongoing preventive or detective control would best reduce recurrence?

  1. Validate system IDs across a network before enabling IS-IS.
  2. Audit attached-bit and border-exit policies in dual-homed areas.
  3. Compare circuit-type values during core link acceptance.
  4. Include actual circuit topology and type in ISIS troubleshooting checks.

Explanation

Correct Answer

C:

The preventive or detective safeguard is: Compare circuit-type values during core link acceptance. This directly addresses the recurring fault: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. The corrective action would be: Align interface circuit-level settings with the intended Level 2 topology. Success is demonstrated when: The link establishes a valid Level 2 adjacency and exchanges the permitted routes.

Incorrect Answers

A:

“Validate system IDs across a network before enabling IS-IS” addresses recurrence of another problem: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. That problem depends on: The preventive or detective safeguard is: Validate system IDs across a network before enabling IS-IS. The recurring risk here is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. The more targeted safeguard is “Compare circuit-type values during core link acceptance” because the preventive or detective safeguard is: Compare circuit-type values during core link acceptance.

B:

“Audit attached-bit and border-exit policies in dual-homed areas” addresses recurrence of another problem: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. That problem depends on: The preventive or detective safeguard is: Audit attached-bit and border-exit policies in dual-homed areas. The recurring risk here is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. The more targeted safeguard is “Compare circuit-type values during core link acceptance” because the preventive or detective safeguard is: Compare circuit-type values during core link acceptance.

D:

“Include actual circuit topology and type in ISIS troubleshooting checks” addresses recurrence of another problem: An engineer expects every IS-IS point-to-point interface to elect a LAN designated intermediate system. That problem depends on: The preventive or detective safeguard is: Include actual circuit topology and type in ISIS troubleshooting checks. The recurring risk here is: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. The more targeted safeguard is “Compare circuit-type values during core link acceptance” because the preventive or detective safeguard is: Compare circuit-type values during core link acceptance.

Question 469

At fictional Cedar Retail, a network engineer supporting store connectivity is reviewing Huawei network security and VPN isolation during an initial deployment test (HCIP-H12-821-SECURITY-118). The observed network issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. Which observation most directly verifies that the corrective change succeeded?

  1. Only approved management hosts can start authorized sessions to the device.
  2. The intended LAN traffic creates a child security association and passes through the tunnel.
  3. An established authorized conversation has the expected state entry and response traffic succeeds.
  4. Each tenant reaches only approved shared service prefixes without broad route exposure.

Explanation

Correct Answer

A:

The best verification observation is: Only approved management hosts can start authorized sessions to the device. It demonstrates the corrective action: Restrict administrative VTY or SSH access to approved management sources with authenticated roles. This fits the principle: Management-plane hardening limits access separately from ordinary routed user traffic. Verify on the actual Huawei platform and network release.

Incorrect Answers

B:

“The intended LAN traffic creates a child security association and passes through the tunnel” responds to another technical or business failure: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. That source case depends on: The best verification observation is: The intended LAN traffic creates a child security association and passes through the tunnel. The present issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. The more direct action is “Only approved management hosts can start authorized sessions to the device” because the best verification observation is: Only approved management hosts can start authorized sessions to the device.

C:

“An established authorized conversation has the expected state entry and response traffic succeeds” responds to another technical or business failure: A Huawei firewall blocks a legitimate return packet even though the initiating client request was allowed by a separate ACL. That source case depends on: The best verification observation is: An established authorized conversation has the expected state entry and response traffic succeeds. The present issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. The more direct action is “Only approved management hosts can start authorized sessions to the device” because the best verification observation is: Only approved management hosts can start authorized sessions to the device.

D:

“Each tenant reaches only approved shared service prefixes without broad route exposure” responds to another technical or business failure: An administrator creates VRFs but intentionally shared services cannot be reached because no controlled route import is configured. That source case depends on: The best verification observation is: Each tenant reaches only approved shared service prefixes without broad route exposure. The present issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. The more direct action is “Only approved management hosts can start authorized sessions to the device” because the best verification observation is: Only approved management hosts can start authorized sessions to the device.

Question 470

At fictional Cedar Retail, a network engineer supporting store connectivity is reviewing Huawei network security and VPN isolation during an initial deployment test (HCIP-H12-821-SECURITY-118). The observed network issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. Which routing, switching, or network principle best explains the appropriate solution?

  1. Security zones reflect interface trust boundaries used by policy evaluation.
  2. Management-plane hardening limits access separately from ordinary routed user traffic.
  3. Cleartext administrative protocols can expose credentials and control activity.
  4. Security capabilities are ineffective when packets do not traverse their enforcement point.

Explanation

Correct Answer

B:

The governing principle is: Management-plane hardening limits access separately from ordinary routed user traffic. In this scenario, the appropriate action is: Restrict administrative VTY or SSH access to approved management sources with authenticated roles. Valid evidence would show: Only approved management hosts can start authorized sessions to the device.

Incorrect Answers

A:

“Security zones reflect interface trust boundaries used by policy evaluation” responds to another technical or business failure: A network places a server in a DMZ but mistakenly assigns its interface to the internal trust zone. That source case depends on: Security zones reflect interface trust boundaries used by policy evaluation. The present issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. The more direct action is “Management-plane hardening limits access separately from ordinary routed user traffic” because Management-plane hardening limits access separately from ordinary routed user traffic.

C:

“Cleartext administrative protocols can expose credentials and control activity” responds to another technical or business failure: A router uses telnet for administration across an untrusted network and the team assumes its device password makes sessions confidential. That source case depends on: Cleartext administrative protocols can expose credentials and control activity. The present issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. The more direct action is “Management-plane hardening limits access separately from ordinary routed user traffic” because Management-plane hardening limits access separately from ordinary routed user traffic.

D:

“Security capabilities are ineffective when packets do not traverse their enforcement point” responds to another technical or business failure: A security feature is installed but traffic bypasses inspection because it crosses an interface outside the intended firewall topology. That source case depends on: Security capabilities are ineffective when packets do not traverse their enforcement point. The present issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. The more direct action is “Management-plane hardening limits access separately from ordinary routed user traffic” because Management-plane hardening limits access separately from ordinary routed user traffic.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests