McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 48

Question 470

At fictional Cedar Retail, a network engineer supporting store connectivity is reviewing Huawei network security and VPN isolation during an initial deployment test (HCIP-H12-821-SECURITY-118). The observed network issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. Which routing, switching, or network principle best explains the appropriate solution?

  1. Security zones reflect interface trust boundaries used by policy evaluation.
  2. Management-plane hardening limits access separately from ordinary routed user traffic.
  3. Cleartext administrative protocols can expose credentials and control activity.
  4. Security capabilities are ineffective when packets do not traverse their enforcement point.

Explanation

Correct Answer

B:

The governing principle is: Management-plane hardening limits access separately from ordinary routed user traffic. In this scenario, the appropriate action is: Restrict administrative VTY or SSH access to approved management sources with authenticated roles. Valid evidence would show: Only approved management hosts can start authorized sessions to the device.

Incorrect Answers

A:

“Security zones reflect interface trust boundaries used by policy evaluation” responds to another technical or business failure: A network places a server in a DMZ but mistakenly assigns its interface to the internal trust zone. That source case depends on: Security zones reflect interface trust boundaries used by policy evaluation. The present issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. The more direct action is “Management-plane hardening limits access separately from ordinary routed user traffic” because Management-plane hardening limits access separately from ordinary routed user traffic.

C:

“Cleartext administrative protocols can expose credentials and control activity” responds to another technical or business failure: A router uses telnet for administration across an untrusted network and the team assumes its device password makes sessions confidential. That source case depends on: Cleartext administrative protocols can expose credentials and control activity. The present issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. The more direct action is “Management-plane hardening limits access separately from ordinary routed user traffic” because Management-plane hardening limits access separately from ordinary routed user traffic.

D:

“Security capabilities are ineffective when packets do not traverse their enforcement point” responds to another technical or business failure: A security feature is installed but traffic bypasses inspection because it crosses an interface outside the intended firewall topology. That source case depends on: Security capabilities are ineffective when packets do not traverse their enforcement point. The present issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. The more direct action is “Management-plane hardening limits access separately from ordinary routed user traffic” because Management-plane hardening limits access separately from ordinary routed user traffic.

Question 471

At fictional Cedar Retail, a network engineer supporting store connectivity is reviewing Huawei network security and VPN isolation during an initial deployment test (HCIP-H12-821-SECURITY-118). The observed network issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. Which ongoing preventive or detective control would best reduce recurrence?

  1. Validate policy order and hit counts with representative traffic.
  2. Audit management source restrictions and session logs regularly.
  3. Trace real forwarding paths before relying on perimeter security policies.
  4. Audit customer interface-to-VRF and route-leak configuration at onboarding.

Explanation

Correct Answer

B:

The preventive or detective safeguard is: Audit management source restrictions and session logs regularly. This directly addresses the recurring fault: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. The corrective action would be: Restrict administrative VTY or SSH access to approved management sources with authenticated roles. Success is demonstrated when: Only approved management hosts can start authorized sessions to the device.

Incorrect Answers

A:

“Validate policy order and hit counts with representative traffic” addresses recurrence of another problem: A firewall logs allowed connections but its security team cannot tie sessions to intended service policies. That problem depends on: The preventive or detective safeguard is: Validate policy order and hit counts with representative traffic. The recurring risk here is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. The more targeted safeguard is “Audit management source restrictions and session logs regularly” because the preventive or detective safeguard is: Audit management source restrictions and session logs regularly.

C:

“Trace real forwarding paths before relying on perimeter security policies” addresses recurrence of another problem: A security feature is installed but traffic bypasses inspection because it crosses an interface outside the intended firewall topology. That problem depends on: The preventive or detective safeguard is: Trace real forwarding paths before relying on perimeter security policies. The recurring risk here is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. The more targeted safeguard is “Audit management source restrictions and session logs regularly” because the preventive or detective safeguard is: Audit management source restrictions and session logs regularly.

D:

“Audit customer interface-to-VRF and route-leak configuration at onboarding” addresses recurrence of another problem: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. That problem depends on: The preventive or detective safeguard is: Audit customer interface-to-VRF and route-leak configuration at onboarding. The recurring risk here is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. The more targeted safeguard is “Audit management source restrictions and session logs regularly” because the preventive or detective safeguard is: Audit management source restrictions and session logs regularly.

Question 472

At fictional Cedar Retail, a network engineer supporting store connectivity is reviewing Huawei network security and VPN isolation during an initial deployment test (HCIP-H12-821-SECURITY-118). The observed network issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. Which next engineering action best addresses the reported problem?

  1. Validate DNAT or source-NAT mapping and applicable security-policy direction using the translated packet path.
  2. Restrict administrative VTY or SSH access to approved management sources with authenticated roles.
  3. Inspect zone direction, policy order and matching hit counts for the affected flow.
  4. Restrict tunnel selectors and post-decryption policies to required business applications.

Explanation

Correct Answer

B:

The directly responsive action is: Restrict administrative VTY or SSH access to approved management sources with authenticated roles. The specific reported fault is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. Confirmation should show: Only approved management hosts can start authorized sessions to the device. The supporting technical principle is: Management-plane hardening limits access separately from ordinary routed user traffic.

Incorrect Answers

A:

“Validate DNAT or source-NAT mapping and applicable security-policy direction using the translated packet path” responds to another technical or business failure: A firewall administrator changes address translation without updating security policies and external users lose access to a public service. That source case depends on: Network address translation and access policy cooperate but perform distinct functions. The present issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. The more direct action is “Restrict administrative VTY or SSH access to approved management sources with authenticated roles” because Management-plane hardening limits access separately from ordinary routed user traffic.

C:

“Inspect zone direction, policy order and matching hit counts for the affected flow” responds to another technical or business failure: A firewall logs allowed connections but its security team cannot tie sessions to intended service policies. That source case depends on: A session can match a higher-priority policy before reaching a later intended rule. The present issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. The more direct action is “Restrict administrative VTY or SSH access to approved management sources with authenticated roles” because Management-plane hardening limits access separately from ordinary routed user traffic.

D:

“Restrict tunnel selectors and post-decryption policies to required business applications” responds to another technical or business failure: An engineer enables IPsec encryption but never examines whether the protected tunnel permits excessive internal subnet access. That source case depends on: VPN confidentiality and authorization scope are independent security requirements. The present issue is: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. The more direct action is “Restrict administrative VTY or SSH access to approved management sources with authenticated roles” because Management-plane hardening limits access separately from ordinary routed user traffic.

Question 473

At fictional Ironbridge Utilities, a network engineer supporting branch services is reviewing BGP routing, path attributes and EVPN exchange during an intersite service activation (HCIP-H12-821-BGP-119). The observed network issue is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. Which next engineering action best addresses the reported problem?

  1. Configure the supported eBGP multihop reachability and correct peer addresses with appropriate routing.
  2. Review MED comparison scope and any explicit policy for peers from different autonomous systems.
  3. Apply local preference in the internal AS to favor the intended egress for valid routes.
  4. Repair reflection topology rather than disabling safety controls for the problematic route.

Explanation

Correct Answer

D:

The directly responsive action is: Repair reflection topology rather than disabling safety controls for the problematic route. The specific reported fault is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. Confirmation should show: Invalid self-originated reflections are rejected and normal external prefixes propagate. The supporting technical principle is: BGP ORIGINATOR_ID is a loop-prevention mechanism in reflected routing.

Incorrect Answers

A:

“Configure the supported eBGP multihop reachability and correct peer addresses with appropriate routing” responds to another technical or business failure: Two eBGP routers attempt to peer over loopback addresses separated by several transit hops using the default one-hop behavior. That source case depends on: EBGP multi-hop peers require explicit control of TTL and loopback reachability. The present issue is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. The more direct action is “Repair reflection topology rather than disabling safety controls for the problematic route” because BGP ORIGINATOR_ID is a loop-prevention mechanism in reflected routing.

B:

“Review MED comparison scope and any explicit policy for peers from different autonomous systems” responds to another technical or business failure: A multi-exit BGP neighbor advertises a preferred MED but the local router compares routes from unrelated upstream ASes incorrectly. That source case depends on: MED can influence entry choice but default comparisons and import policy constrain its use. The present issue is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. The more direct action is “Repair reflection topology rather than disabling safety controls for the problematic route” because BGP ORIGINATOR_ID is a loop-prevention mechanism in reflected routing.

C:

“Apply local preference in the internal AS to favor the intended egress for valid routes” responds to another technical or business failure: Two external BGP exits learn the same remote prefix and a company needs consistent outbound preference inside the AS. That source case depends on: BGP LOCAL_PREF is used to select an AS-wide outbound egress path. The present issue is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. The more direct action is “Repair reflection topology rather than disabling safety controls for the problematic route” because BGP ORIGINATOR_ID is a loop-prevention mechanism in reflected routing.

Question 474

At fictional Ironbridge Utilities, a network engineer supporting branch services is reviewing BGP routing, path attributes and EVPN exchange during an intersite service activation (HCIP-H12-821-BGP-119). The observed network issue is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. Which ongoing preventive or detective control would best reduce recurrence?

  1. Confirm which BGP attributes the upstream provider honors before changing announcements.
  2. Inspect originator and cluster-list fields when route reflection drops paths.
  3. Audit community transmission and route-policy matching after upstream updates.
  4. Inspect negotiated address families after enabling EVPN control plane.

Explanation

Correct Answer

B:

The preventive or detective safeguard is: Inspect originator and cluster-list fields when route reflection drops paths. This directly addresses the recurring fault: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. The corrective action would be: Repair reflection topology rather than disabling safety controls for the problematic route. Success is demonstrated when: Invalid self-originated reflections are rejected and normal external prefixes propagate.

Incorrect Answers

A:

“Confirm which BGP attributes the upstream provider honors before changing announcements” addresses recurrence of another problem: An edge router tries to influence its upstream provider's path selection by assigning LOCAL_PREF on an eBGP announcement. That problem depends on: The preventive or detective safeguard is: Confirm which BGP attributes the upstream provider honors before changing announcements. The recurring risk here is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. The more targeted safeguard is “Inspect originator and cluster-list fields when route reflection drops paths” because the preventive or detective safeguard is: Inspect originator and cluster-list fields when route reflection drops paths.

C:

“Audit community transmission and route-policy matching after upstream updates” addresses recurrence of another problem: A BGP peer receives a route tagged with a public community but route-policy does not match the intended community. That problem depends on: The preventive or detective safeguard is: Audit community transmission and route-policy matching after upstream updates. The recurring risk here is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. The more targeted safeguard is “Inspect originator and cluster-list fields when route reflection drops paths” because the preventive or detective safeguard is: Inspect originator and cluster-list fields when route reflection drops paths.

D:

“Inspect negotiated address families after enabling EVPN control plane” addresses recurrence of another problem: A device advertises VPN address families to an ordinary IPv4-unicast-only peer and receives no expected EVPN updates. That problem depends on: The preventive or detective safeguard is: Inspect negotiated address families after enabling EVPN control plane. The recurring risk here is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. The more targeted safeguard is “Inspect originator and cluster-list fields when route reflection drops paths” because the preventive or detective safeguard is: Inspect originator and cluster-list fields when route reflection drops paths.

Question 475

At fictional Ironbridge Utilities, a network engineer supporting branch services is reviewing BGP routing, path attributes and EVPN exchange during an intersite service activation (HCIP-H12-821-BGP-119). The observed network issue is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. Which observation most directly verifies that the corrective change succeeded?

  1. The control TCP session completes and BGP reaches Established.
  2. Invalid self-originated reflections are rejected and normal external prefixes propagate.
  3. The aggregate is advertised with working forwarding paths to all intended destinations.
  4. The BGP FSM reaches Established and exchanges the intended prefixes.

Explanation

Correct Answer

B:

The best verification observation is: Invalid self-originated reflections are rejected and normal external prefixes propagate. It demonstrates the corrective action: Repair reflection topology rather than disabling safety controls for the problematic route. This fits the principle: BGP ORIGINATOR_ID is a loop-prevention mechanism in reflected routing. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“The control TCP session completes and BGP reaches Established” responds to another technical or business failure: A border router can ping an eBGP peer yet session establishment fails because firewall ACL blocks TCP port 179. That source case depends on: The best verification observation is: The control TCP session completes and BGP reaches Established. The present issue is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. The more direct action is “Invalid self-originated reflections are rejected and normal external prefixes propagate” because the best verification observation is: Invalid self-originated reflections are rejected and normal external prefixes propagate.

C:

“The aggregate is advertised with working forwarding paths to all intended destinations” responds to another technical or business failure: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. That source case depends on: The best verification observation is: The aggregate is advertised with working forwarding paths to all intended destinations. The present issue is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. The more direct action is “Invalid self-originated reflections are rejected and normal external prefixes propagate” because the best verification observation is: Invalid self-originated reflections are rejected and normal external prefixes propagate.

D:

“The BGP FSM reaches Established and exchanges the intended prefixes” responds to another technical or business failure: Two routers establish TCP connectivity but BGP stays in Active because the configured peer AS differs from the neighbor's actual AS. That source case depends on: The best verification observation is: The BGP FSM reaches Established and exchanges the intended prefixes. The present issue is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. The more direct action is “Invalid self-originated reflections are rejected and normal external prefixes propagate” because the best verification observation is: Invalid self-originated reflections are rejected and normal external prefixes propagate.

Question 476

At fictional Ironbridge Utilities, a network engineer supporting branch services is reviewing BGP routing, path attributes and EVPN exchange during an intersite service activation (HCIP-H12-821-BGP-119). The observed network issue is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. Which routing, switching, or network principle best explains the appropriate solution?

  1. BGP outbound prefix filtering controls which NLRI are advertised to external peers.
  2. BGP TCP endpoints must match peer configuration and be routable in both directions.
  3. BGP ORIGINATOR_ID is a loop-prevention mechanism in reflected routing.
  4. EVPN route types distinguish IP-prefix advertisement from MAC/IP advertisement.

Explanation

Correct Answer

C:

The governing principle is: BGP ORIGINATOR_ID is a loop-prevention mechanism in reflected routing. In this scenario, the appropriate action is: Repair reflection topology rather than disabling safety controls for the problematic route. Valid evidence would show: Invalid self-originated reflections are rejected and normal external prefixes propagate.

Incorrect Answers

A:

“BGP outbound prefix filtering controls which NLRI are advertised to external peers” responds to another technical or business failure: An administrator applies an export prefix list at the BGP border but mistakenly filters all networks including a critical aggregate. That source case depends on: BGP outbound prefix filtering controls which NLRI are advertised to external peers. The present issue is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. The more direct action is “BGP ORIGINATOR_ID is a loop-prevention mechanism in reflected routing” because BGP ORIGINATOR_ID is a loop-prevention mechanism in reflected routing.

B:

“BGP TCP endpoints must match peer configuration and be routable in both directions” responds to another technical or business failure: An iBGP adjacency to peer loopbacks fails because one side sends TCP from the physical interface address. That source case depends on: BGP TCP endpoints must match peer configuration and be routable in both directions. The present issue is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. The more direct action is “BGP ORIGINATOR_ID is a loop-prevention mechanism in reflected routing” because BGP ORIGINATOR_ID is a loop-prevention mechanism in reflected routing.

D:

“EVPN route types distinguish IP-prefix advertisement from MAC/IP advertisement” responds to another technical or business failure: An engineer expects BGP EVPN Type 5 IP prefixes to replace all MAC learning requirements for a layer-2 stretch. That source case depends on: EVPN route types distinguish IP-prefix advertisement from MAC/IP advertisement. The present issue is: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. The more direct action is “BGP ORIGINATOR_ID is a loop-prevention mechanism in reflected routing” because BGP ORIGINATOR_ID is a loop-prevention mechanism in reflected routing.

Question 477

At fictional Granite Logistics, a network engineer supporting warehouse distribution is reviewing IGMP and PIM multicast distribution during a production cutover (HCIP-H12-821-MULTICAST-120). The observed network issue is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. Which routing, switching, or network principle best explains the appropriate solution?

  1. Multicast routing uses reverse-path-forwarding checks to prevent loops.
  2. PIM-DM initially floods and prunes while PIM-SM builds receiver-oriented trees.
  3. PIM-SM can transition from an RP shared tree to a source-specific shortest-path tree.
  4. IGMP uses membership queries and reports to maintain receiver state.

Explanation

Correct Answer

D:

The governing principle is: IGMP uses membership queries and reports to maintain receiver state. In this scenario, the appropriate action is: Restore an appropriate IGMP querier and group-report exchange on the segment. Valid evidence would show: Client memberships are refreshed and multicast packets reach subscribed hosts.

Incorrect Answers

A:

“Multicast routing uses reverse-path-forwarding checks to prevent loops” responds to another technical or business failure: A multicast forwarding entry receives traffic from a source on the wrong interface and drops it. That source case depends on: Multicast routing uses reverse-path-forwarding checks to prevent loops. The present issue is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. The more direct action is “IGMP uses membership queries and reports to maintain receiver state” because IGMP uses membership queries and reports to maintain receiver state.

B:

“PIM-DM initially floods and prunes while PIM-SM builds receiver-oriented trees” responds to another technical or business failure: A PIM dense-mode network floods large multicast volumes to branches with no interested receivers. That source case depends on: PIM-DM initially floods and prunes while PIM-SM builds receiver-oriented trees. The present issue is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. The more direct action is “IGMP uses membership queries and reports to maintain receiver state” because IGMP uses membership queries and reports to maintain receiver state.

C:

“PIM-SM can transition from an RP shared tree to a source-specific shortest-path tree” responds to another technical or business failure: A PIM-SM router cannot switch efficiently to a shortest-path tree because its source route points through another neighbor. That source case depends on: PIM-SM can transition from an RP shared tree to a source-specific shortest-path tree. The present issue is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. The more direct action is “IGMP uses membership queries and reports to maintain receiver state” because IGMP uses membership queries and reports to maintain receiver state.

Question 478

At fictional Granite Logistics, a network engineer supporting warehouse distribution is reviewing IGMP and PIM multicast distribution during a production cutover (HCIP-H12-821-MULTICAST-120). The observed network issue is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. Which next engineering action best addresses the reported problem?

  1. Align IGMP version support and receiver source-filtering expectations.
  2. Correct unicast route reachability or multicast RPF path so the incoming interface is valid.
  3. Enable and validate PIM on all required routed multicast hops in the distribution tree.
  4. Restore an appropriate IGMP querier and group-report exchange on the segment.

Explanation

Correct Answer

D:

The directly responsive action is: Restore an appropriate IGMP querier and group-report exchange on the segment. The specific reported fault is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. Confirmation should show: Client memberships are refreshed and multicast packets reach subscribed hosts. The supporting technical principle is: IGMP uses membership queries and reports to maintain receiver state.

Incorrect Answers

A:

“Align IGMP version support and receiver source-filtering expectations” responds to another technical or business failure: A network expects IGMPv3 source-specific filtering but uses routers configured only for IGMPv2. That source case depends on: IGMPv3 adds source filtering required for source-specific multicast operation. The present issue is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. The more direct action is “Restore an appropriate IGMP querier and group-report exchange on the segment” because IGMP uses membership queries and reports to maintain receiver state.

B:

“Correct unicast route reachability or multicast RPF path so the incoming interface is valid” responds to another technical or business failure: A multicast forwarding entry receives traffic from a source on the wrong interface and drops it. That source case depends on: Multicast routing uses reverse-path-forwarding checks to prevent loops. The present issue is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. The more direct action is “Restore an appropriate IGMP querier and group-report exchange on the segment” because IGMP uses membership queries and reports to maintain receiver state.

C:

“Enable and validate PIM on all required routed multicast hops in the distribution tree” responds to another technical or business failure: A multicast receiver has IGMP state locally but the PIM upstream interface is disabled. That source case depends on: Local IGMP membership alone does not carry multicast across routed PIM boundaries. The present issue is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. The more direct action is “Restore an appropriate IGMP querier and group-report exchange on the segment” because IGMP uses membership queries and reports to maintain receiver state.

Question 479

At fictional Granite Logistics, a network engineer supporting warehouse distribution is reviewing IGMP and PIM multicast distribution during a production cutover (HCIP-H12-821-MULTICAST-120). The observed network issue is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. Which ongoing preventive or detective control would best reduce recurrence?

  1. Test source-route failure recovery for multicast services.
  2. Verify multicast replication and bandwidth on each network branch.
  3. Check the querier role and aging timers during multicast incidents.
  4. Validate snooping memberships after each VLAN access change.

Explanation

Correct Answer

C:

The preventive or detective safeguard is: Check the querier role and aging timers during multicast incidents. This directly addresses the recurring fault: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. The corrective action would be: Restore an appropriate IGMP querier and group-report exchange on the segment. Success is demonstrated when: Client memberships are refreshed and multicast packets reach subscribed hosts.

Incorrect Answers

A:

“Test source-route failure recovery for multicast services” addresses recurrence of another problem: A multicast core drops packets after a path failover because the unicast RPF route has not converged to the new incoming link. That problem depends on: The preventive or detective safeguard is: Test source-route failure recovery for multicast services. The recurring risk here is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. The more targeted safeguard is “Check the querier role and aging timers during multicast incidents” because the preventive or detective safeguard is: Check the querier role and aging timers during multicast incidents.

B:

“Verify multicast replication and bandwidth on each network branch” addresses recurrence of another problem: A video stream from one sender is replicated as unicast to hundreds of recipients and saturates the WAN. That problem depends on: The preventive or detective safeguard is: Verify multicast replication and bandwidth on each network branch. The recurring risk here is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. The more targeted safeguard is “Check the querier role and aging timers during multicast incidents” because the preventive or detective safeguard is: Check the querier role and aging timers during multicast incidents.

D:

“Validate snooping memberships after each VLAN access change” addresses recurrence of another problem: A receiver sends IGMP membership reports but the local VLAN switch floods the multicast group to every port. That problem depends on: The preventive or detective safeguard is: Validate snooping memberships after each VLAN access change. The recurring risk here is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. The more targeted safeguard is “Check the querier role and aging timers during multicast incidents” because the preventive or detective safeguard is: Check the querier role and aging timers during multicast incidents.

Question 480

At fictional Granite Logistics, a network engineer supporting warehouse distribution is reviewing IGMP and PIM multicast distribution during a production cutover (HCIP-H12-821-MULTICAST-120). The observed network issue is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. Which observation most directly verifies that the corrective change succeeded?

  1. Client memberships are refreshed and multicast packets reach subscribed hosts.
  2. Packets arrive on the expected RPF interface and are forwarded downstream.
  3. Only intended receivers for each service group see the correct media flow.
  4. Stream traffic is limited to known interested ports and any required router-facing links.

Explanation

Correct Answer

A:

The best verification observation is: Client memberships are refreshed and multicast packets reach subscribed hosts. It demonstrates the corrective action: Restore an appropriate IGMP querier and group-report exchange on the segment. This fits the principle: IGMP uses membership queries and reports to maintain receiver state. Verify on the actual Huawei platform and network release.

Incorrect Answers

B:

“Packets arrive on the expected RPF interface and are forwarded downstream” responds to another technical or business failure: A multicast forwarding entry receives traffic from a source on the wrong interface and drops it. That source case depends on: The best verification observation is: Packets arrive on the expected RPF interface and are forwarded downstream. The present issue is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. The more direct action is “Client memberships are refreshed and multicast packets reach subscribed hosts” because the best verification observation is: Client memberships are refreshed and multicast packets reach subscribed hosts.

C:

“Only intended receivers for each service group see the correct media flow” responds to another technical or business failure: Multicast packets arrive at the wrong group because the sender application uses a group address overlapping another service. That source case depends on: The best verification observation is: Only intended receivers for each service group see the correct media flow. The present issue is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. The more direct action is “Client memberships are refreshed and multicast packets reach subscribed hosts” because the best verification observation is: Client memberships are refreshed and multicast packets reach subscribed hosts.

D:

“Stream traffic is limited to known interested ports and any required router-facing links” responds to another technical or business failure: A receiver sends IGMP membership reports but the local VLAN switch floods the multicast group to every port. That source case depends on: The best verification observation is: Stream traffic is limited to known interested ports and any required router-facing links. The present issue is: A multicast router sees no group receivers because IGMP query messages are absent from a VLAN. The more direct action is “Client memberships are refreshed and multicast packets reach subscribed hosts” because the best verification observation is: Client memberships are refreshed and multicast packets reach subscribed hosts.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests