McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 66

Question 650

At fictional Elmstone Transit, a network engineer supporting operations terminals is reviewing BGP routing, path attributes and EVPN exchange during a planned network scaling change (HCIP-H12-821-BGP-163). The observed network issue is: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. Which observation most directly verifies that the corrective change succeeded?

  1. The aggregate is advertised with working forwarding paths to all intended destinations.
  2. The provider's confirmed accepted policy changes its inbound route choice as agreed.
  3. Both routers reach Established using the planned loopback source and destination.
  4. Reflected updates carry expected cluster-list information without false loop rejection.

Explanation

Correct Answer

A:

The best verification observation is: The aggregate is advertised with working forwarding paths to all intended destinations. It demonstrates the corrective action: Validate supporting component routes and safe aggregate generation or discard behavior. This fits the principle: BGP aggregation must be consistent with actual routed component reachability. Verify on the actual Huawei platform and network release.

Incorrect Answers

B:

“The provider's confirmed accepted policy changes its inbound route choice as agreed” responds to another technical or business failure: An edge router tries to influence its upstream provider's path selection by assigning LOCAL_PREF on an eBGP announcement. That source case depends on: The best verification observation is: The provider's confirmed accepted policy changes its inbound route choice as agreed. The present issue is: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. The more direct action is “The aggregate is advertised with working forwarding paths to all intended destinations” because the best verification observation is: The aggregate is advertised with working forwarding paths to all intended destinations.

C:

“Both routers reach Established using the planned loopback source and destination” responds to another technical or business failure: An iBGP adjacency to peer loopbacks fails because one side sends TCP from the physical interface address. That source case depends on: The best verification observation is: Both routers reach Established using the planned loopback source and destination. The present issue is: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. The more direct action is “The aggregate is advertised with working forwarding paths to all intended destinations” because the best verification observation is: The aggregate is advertised with working forwarding paths to all intended destinations.

D:

“Reflected updates carry expected cluster-list information without false loop rejection” responds to another technical or business failure: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. That source case depends on: The best verification observation is: Reflected updates carry expected cluster-list information without false loop rejection. The present issue is: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. The more direct action is “The aggregate is advertised with working forwarding paths to all intended destinations” because the best verification observation is: The aggregate is advertised with working forwarding paths to all intended destinations.

Question 651

At fictional Elmstone Transit, a network engineer supporting operations terminals is reviewing BGP routing, path attributes and EVPN exchange during a planned network scaling change (HCIP-H12-821-BGP-163). The observed network issue is: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. Which routing, switching, or network principle best explains the appropriate solution?

  1. BGP LOCAL_PREF is normally local to an AS and is not sent to eBGP neighbors.
  2. BGP route reflectors use cluster-list attributes to detect reflection loops.
  3. EVPN Type 2 routes distribute endpoint MAC reachability and related IP bindings.
  4. BGP aggregation must be consistent with actual routed component reachability.

Explanation

Correct Answer

D:

The governing principle is: BGP aggregation must be consistent with actual routed component reachability. In this scenario, the appropriate action is: Validate supporting component routes and safe aggregate generation or discard behavior. Valid evidence would show: The aggregate is advertised with working forwarding paths to all intended destinations.

Incorrect Answers

A:

“BGP LOCAL_PREF is normally local to an AS and is not sent to eBGP neighbors” responds to another technical or business failure: An edge router tries to influence its upstream provider's path selection by assigning LOCAL_PREF on an eBGP announcement. That source case depends on: BGP LOCAL_PREF is normally local to an AS and is not sent to eBGP neighbors. The present issue is: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. The more direct action is “BGP aggregation must be consistent with actual routed component reachability” because BGP aggregation must be consistent with actual routed component reachability.

B:

“BGP route reflectors use cluster-list attributes to detect reflection loops” responds to another technical or business failure: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. That source case depends on: BGP route reflectors use cluster-list attributes to detect reflection loops. The present issue is: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. The more direct action is “BGP aggregation must be consistent with actual routed component reachability” because BGP aggregation must be consistent with actual routed component reachability.

C:

“EVPN Type 2 routes distribute endpoint MAC reachability and related IP bindings” responds to another technical or business failure: A VXLAN VTEP fails to learn a remote host's MAC and IP even though underlay IP reachability is working. That source case depends on: EVPN Type 2 routes distribute endpoint MAC reachability and related IP bindings. The present issue is: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. The more direct action is “BGP aggregation must be consistent with actual routed component reachability” because BGP aggregation must be consistent with actual routed component reachability.

Question 652

At fictional Elmstone Transit, a network engineer supporting operations terminals is reviewing BGP routing, path attributes and EVPN exchange during a planned network scaling change (HCIP-H12-821-BGP-163). The observed network issue is: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. Which ongoing preventive or detective control would best reduce recurrence?

  1. Test each included component network before advertising a new aggregate.
  2. Record BGP state transitions and transport errors in new-neighbor tests.
  3. Map service intent to EVPN route type during VXLAN design.
  4. Check EVPN Type 2 route import during leaf host migration.

Explanation

Correct Answer

A:

The preventive or detective safeguard is: Test each included component network before advertising a new aggregate. This directly addresses the recurring fault: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. The corrective action would be: Validate supporting component routes and safe aggregate generation or discard behavior. Success is demonstrated when: The aggregate is advertised with working forwarding paths to all intended destinations.

Incorrect Answers

B:

“Record BGP state transitions and transport errors in new-neighbor tests” addresses recurrence of another problem: BGP stays in Idle after a new neighbor is configured and operators troubleshoot route policies instead of local interface reachability. That problem depends on: The preventive or detective safeguard is: Record BGP state transitions and transport errors in new-neighbor tests. The recurring risk here is: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. The more targeted safeguard is “Test each included component network before advertising a new aggregate” because the preventive or detective safeguard is: Test each included component network before advertising a new aggregate.

C:

“Map service intent to EVPN route type during VXLAN design” addresses recurrence of another problem: An engineer expects BGP EVPN Type 5 IP prefixes to replace all MAC learning requirements for a layer-2 stretch. That problem depends on: The preventive or detective safeguard is: Map service intent to EVPN route type during VXLAN design. The recurring risk here is: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. The more targeted safeguard is “Test each included component network before advertising a new aggregate” because the preventive or detective safeguard is: Test each included component network before advertising a new aggregate.

D:

“Check EVPN Type 2 route import during leaf host migration” addresses recurrence of another problem: A VXLAN VTEP fails to learn a remote host's MAC and IP even though underlay IP reachability is working. That problem depends on: The preventive or detective safeguard is: Check EVPN Type 2 route import during leaf host migration. The recurring risk here is: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. The more targeted safeguard is “Test each included component network before advertising a new aggregate” because the preventive or detective safeguard is: Test each included component network before advertising a new aggregate.

Question 653

At fictional Granite Logistics, a network engineer supporting warehouse distribution is reviewing IS-IS level-aware topology and database synchronization during a baseline compliance test (HCIP-H12-821-ISIS-164). The observed network issue is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. Which routing, switching, or network principle best explains the appropriate solution?

  1. IS-IS database consistency relies on link-state PDU sequencing and flooding acknowledgements.
  2. IS-IS exchanges routing PDUs directly over the link rather than using ordinary IP multicast transport.
  3. IS-IS identifies routing systems using unique system IDs.
  4. IS-IS attached-bit behavior can influence Level 1 routing toward other areas.

Explanation

Correct Answer

C:

The governing principle is: IS-IS identifies routing systems using unique system IDs. In this scenario, the appropriate action is: Assign each IS-IS node a unique stable system identifier within the domain. Valid evidence would show: Neighbor databases show distinct system IDs and consistent LSP origins.

Incorrect Answers

A:

“IS-IS database consistency relies on link-state PDU sequencing and flooding acknowledgements” responds to another technical or business failure: An IS-IS area contains conflicting LSP versions after connectivity flaps and routers disagree about routes. That source case depends on: IS-IS database consistency relies on link-state PDU sequencing and flooding acknowledgements. The present issue is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. The more direct action is “IS-IS identifies routing systems using unique system IDs” because IS-IS identifies routing systems using unique system IDs.

B:

“IS-IS exchanges routing PDUs directly over the link rather than using ordinary IP multicast transport” responds to another technical or business failure: IS-IS adjacency remains Down when Hello frames are filtered by an intermediate layer-2 device. That source case depends on: IS-IS exchanges routing PDUs directly over the link rather than using ordinary IP multicast transport. The present issue is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. The more direct action is “IS-IS identifies routing systems using unique system IDs” because IS-IS identifies routing systems using unique system IDs.

D:

“IS-IS attached-bit behavior can influence Level 1 routing toward other areas” responds to another technical or business failure: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. That source case depends on: IS-IS attached-bit behavior can influence Level 1 routing toward other areas. The present issue is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. The more direct action is “IS-IS identifies routing systems using unique system IDs” because IS-IS identifies routing systems using unique system IDs.

Question 654

At fictional Granite Logistics, a network engineer supporting warehouse distribution is reviewing IS-IS level-aware topology and database synchronization during a baseline compliance test (HCIP-H12-821-ISIS-164). The observed network issue is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. Which observation most directly verifies that the corrective change succeeded?

  1. Other routers avoid the maintenance node for ordinary transit paths when alternatives exist.
  2. Neighbor databases show distinct system IDs and consistent LSP origins.
  3. The Level 1 device installs a valid route toward its local Level 1/2 router.
  4. Access routers select the documented exit and no longer follow an accidental preferred attachment.

Explanation

Correct Answer

B:

The best verification observation is: Neighbor databases show distinct system IDs and consistent LSP origins. It demonstrates the corrective action: Assign each IS-IS node a unique stable system identifier within the domain. This fits the principle: IS-IS identifies routing systems using unique system IDs. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Other routers avoid the maintenance node for ordinary transit paths when alternatives exist” responds to another technical or business failure: A maintenance router still attracts IS-IS transit traffic after operators intend it to avoid forwarding. That source case depends on: The best verification observation is: Other routers avoid the maintenance node for ordinary transit paths when alternatives exist. The present issue is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. The more direct action is “Neighbor databases show distinct system IDs and consistent LSP origins” because the best verification observation is: Neighbor databases show distinct system IDs and consistent LSP origins.

C:

“The Level 1 device installs a valid route toward its local Level 1/2 router” responds to another technical or business failure: A Level 1-only router cannot reach an IP prefix advertised only outside its local IS-IS area. That source case depends on: The best verification observation is: The Level 1 device installs a valid route toward its local Level 1/2 router. The present issue is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. The more direct action is “Neighbor databases show distinct system IDs and consistent LSP origins” because the best verification observation is: Neighbor databases show distinct system IDs and consistent LSP origins.

D:

“Access routers select the documented exit and no longer follow an accidental preferred attachment” responds to another technical or business failure: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. That source case depends on: The best verification observation is: Access routers select the documented exit and no longer follow an accidental preferred attachment. The present issue is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. The more direct action is “Neighbor databases show distinct system IDs and consistent LSP origins” because the best verification observation is: Neighbor databases show distinct system IDs and consistent LSP origins.

Question 655

At fictional Granite Logistics, a network engineer supporting warehouse distribution is reviewing IS-IS level-aware topology and database synchronization during a baseline compliance test (HCIP-H12-821-ISIS-164). The observed network issue is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. Which ongoing preventive or detective control would best reduce recurrence?

  1. Validate system IDs across a network before enabling IS-IS.
  2. Include actual circuit topology and type in ISIS troubleshooting checks.
  3. Test IS-IS PDU forwarding over new Ethernet interconnects.
  4. Compare circuit-type values during core link acceptance.

Explanation

Correct Answer

A:

The preventive or detective safeguard is: Validate system IDs across a network before enabling IS-IS. This directly addresses the recurring fault: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. The corrective action would be: Assign each IS-IS node a unique stable system identifier within the domain. Success is demonstrated when: Neighbor databases show distinct system IDs and consistent LSP origins.

Incorrect Answers

B:

“Include actual circuit topology and type in ISIS troubleshooting checks” addresses recurrence of another problem: An engineer expects every IS-IS point-to-point interface to elect a LAN designated intermediate system. That problem depends on: The preventive or detective safeguard is: Include actual circuit topology and type in ISIS troubleshooting checks. The recurring risk here is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. The more targeted safeguard is “Validate system IDs across a network before enabling IS-IS” because the preventive or detective safeguard is: Validate system IDs across a network before enabling IS-IS.

C:

“Test IS-IS PDU forwarding over new Ethernet interconnects” addresses recurrence of another problem: IS-IS adjacency remains Down when Hello frames are filtered by an intermediate layer-2 device. That problem depends on: The preventive or detective safeguard is: Test IS-IS PDU forwarding over new Ethernet interconnects. The recurring risk here is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. The more targeted safeguard is “Validate system IDs across a network before enabling IS-IS” because the preventive or detective safeguard is: Validate system IDs across a network before enabling IS-IS.

D:

“Compare circuit-type values during core link acceptance” addresses recurrence of another problem: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. That problem depends on: The preventive or detective safeguard is: Compare circuit-type values during core link acceptance. The recurring risk here is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. The more targeted safeguard is “Validate system IDs across a network before enabling IS-IS” because the preventive or detective safeguard is: Validate system IDs across a network before enabling IS-IS.

Question 656

At fictional Granite Logistics, a network engineer supporting warehouse distribution is reviewing IS-IS level-aware topology and database synchronization during a baseline compliance test (HCIP-H12-821-ISIS-164). The observed network issue is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. Which next engineering action best addresses the reported problem?

  1. Inspect the IS-IS DIS election and pseudonode LSP roles instead of applying OSPF DR rules.
  2. Permit the appropriate IS-IS link-layer PDUs and check physical segment connectivity.
  3. Assign each IS-IS node a unique stable system identifier within the domain.
  4. Verify wide-metric support and configuration consistency across participating routers.

Explanation

Correct Answer

C:

The directly responsive action is: Assign each IS-IS node a unique stable system identifier within the domain. The specific reported fault is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. Confirmation should show: Neighbor databases show distinct system IDs and consistent LSP origins. The supporting technical principle is: IS-IS identifies routing systems using unique system IDs.

Incorrect Answers

A:

“Inspect the IS-IS DIS election and pseudonode LSP roles instead of applying OSPF DR rules” responds to another technical or business failure: An IS-IS router is elected designated intermediate system on an Ethernet segment but an engineer calls it an OSPF DR. That source case depends on: IS-IS LAN DIS behavior differs from OSPF designated-router adjacency handling. The present issue is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. The more direct action is “Assign each IS-IS node a unique stable system identifier within the domain” because IS-IS identifies routing systems using unique system IDs.

B:

“Permit the appropriate IS-IS link-layer PDUs and check physical segment connectivity” responds to another technical or business failure: IS-IS adjacency remains Down when Hello frames are filtered by an intermediate layer-2 device. That source case depends on: IS-IS exchanges routing PDUs directly over the link rather than using ordinary IP multicast transport. The present issue is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. The more direct action is “Assign each IS-IS node a unique stable system identifier within the domain” because IS-IS identifies routing systems using unique system IDs.

D:

“Verify wide-metric support and configuration consistency across participating routers” responds to another technical or business failure: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. That source case depends on: IS-IS wide metrics extend usable cost representation for modern network designs. The present issue is: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. The more direct action is “Assign each IS-IS node a unique stable system identifier within the domain” because IS-IS identifies routing systems using unique system IDs.

Question 657

At fictional Keystone Hospitality, a network engineer supporting guest services is reviewing controller-managed enterprise WLAN during a production cutover (HCIP-H12-821-WLAN-165). The observed network issue is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. Which observation most directly verifies that the corrective change succeeded?

  1. APs recover onto the intended backup AC and approved SSIDs resume service.
  2. Devices associate with appropriate nearby APs and handovers meet service targets.
  3. New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits.
  4. Authorized identities connect to the WLAN while invalid credentials are denied.

Explanation

Correct Answer

A:

The best verification observation is: APs recover onto the intended backup AC and approved SSIDs resume service. It demonstrates the corrective action: Design supported AC redundancy and AP failover behavior and verify its licensing and topology. This fits the principle: Centralized WLAN control needs deliberate high availability and AP failover planning. Verify on the actual Huawei platform and network release.

Incorrect Answers

B:

“Devices associate with appropriate nearby APs and handovers meet service targets” responds to another technical or business failure: A Wi-Fi deployment applies identical power levels in a dense conference center and clients roam unpredictably to distant APs. That source case depends on: The best verification observation is: Devices associate with appropriate nearby APs and handovers meet service targets. The present issue is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. The more direct action is “APs recover onto the intended backup AC and approved SSIDs resume service” because the best verification observation is: APs recover onto the intended backup AC and approved SSIDs resume service.

C:

“New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits” responds to another technical or business failure: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. That source case depends on: The best verification observation is: New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits. The present issue is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. The more direct action is “APs recover onto the intended backup AC and approved SSIDs resume service” because the best verification observation is: APs recover onto the intended backup AC and approved SSIDs resume service.

D:

“Authorized identities connect to the WLAN while invalid credentials are denied” responds to another technical or business failure: An SSID uses open authentication despite organizational requirements for enterprise identity verification. That source case depends on: The best verification observation is: Authorized identities connect to the WLAN while invalid credentials are denied. The present issue is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. The more direct action is “APs recover onto the intended backup AC and approved SSIDs resume service” because the best verification observation is: APs recover onto the intended backup AC and approved SSIDs resume service.

Question 658

At fictional Keystone Hospitality, a network engineer supporting guest services is reviewing controller-managed enterprise WLAN during a production cutover (HCIP-H12-821-WLAN-165). The observed network issue is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. Which ongoing preventive or detective control would best reduce recurrence?

  1. Record RF occupancy and client performance after adding new APs.
  2. Test positive and negative 802.1X authentication during SSID commissioning.
  3. Rehearse controller loss with representative APs and client traffic.
  4. Monitor CAPWAP session stability after switching or ACL changes.

Explanation

Correct Answer

C:

The preventive or detective safeguard is: Rehearse controller loss with representative APs and client traffic. This directly addresses the recurring fault: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. The corrective action would be: Design supported AC redundancy and AP failover behavior and verify its licensing and topology. Success is demonstrated when: APs recover onto the intended backup AC and approved SSIDs resume service.

Incorrect Answers

A:

“Record RF occupancy and client performance after adding new APs” addresses recurrence of another problem: A large warehouse WLAN appears healthy but clients disconnect during a channel change because radios suffer co-channel congestion. That problem depends on: The preventive or detective safeguard is: Record RF occupancy and client performance after adding new APs. The recurring risk here is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. The more targeted safeguard is “Rehearse controller loss with representative APs and client traffic” because the preventive or detective safeguard is: Rehearse controller loss with representative APs and client traffic.

B:

“Test positive and negative 802.1X authentication during SSID commissioning” addresses recurrence of another problem: An SSID uses open authentication despite organizational requirements for enterprise identity verification. That problem depends on: The preventive or detective safeguard is: Test positive and negative 802.1X authentication during SSID commissioning. The recurring risk here is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. The more targeted safeguard is “Rehearse controller loss with representative APs and client traffic” because the preventive or detective safeguard is: Rehearse controller loss with representative APs and client traffic.

D:

“Monitor CAPWAP session stability after switching or ACL changes” addresses recurrence of another problem: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. That problem depends on: The preventive or detective safeguard is: Monitor CAPWAP session stability after switching or ACL changes. The recurring risk here is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. The more targeted safeguard is “Rehearse controller loss with representative APs and client traffic” because the preventive or detective safeguard is: Rehearse controller loss with representative APs and client traffic.

Question 659

At fictional Keystone Hospitality, a network engineer supporting guest services is reviewing controller-managed enterprise WLAN during a production cutover (HCIP-H12-821-WLAN-165). The observed network issue is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. Which next engineering action best addresses the reported problem?

  1. Correct supported AC discovery and CAPWAP reachability for the AP management segment.
  2. Design supported AC redundancy and AP failover behavior and verify its licensing and topology.
  3. Design WLAN VLAN pooling and appropriately sized DHCP scopes for the intended client population.
  4. Align approved SSID-to-VLAN and roaming architecture across relevant AP groups.

Explanation

Correct Answer

B:

The directly responsive action is: Design supported AC redundancy and AP failover behavior and verify its licensing and topology. The specific reported fault is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. Confirmation should show: APs recover onto the intended backup AC and approved SSIDs resume service. The supporting technical principle is: Centralized WLAN control needs deliberate high availability and AP failover planning.

Incorrect Answers

A:

“Correct supported AC discovery and CAPWAP reachability for the AP management segment” responds to another technical or business failure: A large Huawei WLAN has many access points but a new AP cannot register because it discovers the wrong wireless controller. That source case depends on: Centrally managed WLAN APs depend on controller discovery and CAPWAP control connectivity. The present issue is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. The more direct action is “Design supported AC redundancy and AP failover behavior and verify its licensing and topology” because Centralized WLAN control needs deliberate high availability and AP failover planning.

C:

“Design WLAN VLAN pooling and appropriately sized DHCP scopes for the intended client population” responds to another technical or business failure: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. That source case depends on: VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments. The present issue is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. The more direct action is “Design supported AC redundancy and AP failover behavior and verify its licensing and topology” because Centralized WLAN control needs deliberate high availability and AP failover planning.

D:

“Align approved SSID-to-VLAN and roaming architecture across relevant AP groups” responds to another technical or business failure: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. That source case depends on: WLAN roaming outcomes depend on consistent client network mapping and mobility design. The present issue is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. The more direct action is “Design supported AC redundancy and AP failover behavior and verify its licensing and topology” because Centralized WLAN control needs deliberate high availability and AP failover planning.

Question 660

At fictional Keystone Hospitality, a network engineer supporting guest services is reviewing controller-managed enterprise WLAN during a production cutover (HCIP-H12-821-WLAN-165). The observed network issue is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. Which routing, switching, or network principle best explains the appropriate solution?

  1. WLAN roaming outcomes depend on consistent client network mapping and mobility design.
  2. WLAN controller profiles become effective only when associated with the correct AP scope.
  3. WLAN radio cell size influences roaming decisions and co-channel interference.
  4. Centralized WLAN control needs deliberate high availability and AP failover planning.

Explanation

Correct Answer

D:

The governing principle is: Centralized WLAN control needs deliberate high availability and AP failover planning. In this scenario, the appropriate action is: Design supported AC redundancy and AP failover behavior and verify its licensing and topology. Valid evidence would show: APs recover onto the intended backup AC and approved SSIDs resume service.

Incorrect Answers

A:

“WLAN roaming outcomes depend on consistent client network mapping and mobility design” responds to another technical or business failure: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. That source case depends on: WLAN roaming outcomes depend on consistent client network mapping and mobility design. The present issue is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. The more direct action is “Centralized WLAN control needs deliberate high availability and AP failover planning” because Centralized WLAN control needs deliberate high availability and AP failover planning.

B:

“WLAN controller profiles become effective only when associated with the correct AP scope” responds to another technical or business failure: An AC service template is correct but an AP group still advertises an old SSID due to an unbound or wrong profile. That source case depends on: WLAN controller profiles become effective only when associated with the correct AP scope. The present issue is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. The more direct action is “Centralized WLAN control needs deliberate high availability and AP failover planning” because Centralized WLAN control needs deliberate high availability and AP failover planning.

C:

“WLAN radio cell size influences roaming decisions and co-channel interference” responds to another technical or business failure: A Wi-Fi deployment applies identical power levels in a dense conference center and clients roam unpredictably to distant APs. That source case depends on: WLAN radio cell size influences roaming decisions and co-channel interference. The present issue is: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. The more direct action is “Centralized WLAN control needs deliberate high availability and AP failover planning” because Centralized WLAN control needs deliberate high availability and AP failover planning.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests