McAfee Secure

Exam Code: H19-301

Exam Name: Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Certification Provider: Huawei

Corresponding Certification: HCPA-IP Network

Huawei H19-301 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

508 Questions & Answers with Testing Engine

"Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU Exam", also known as H19-301 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H19-301 Exam Engine. Your H19-301 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H19-301 Practice Test 12

Question 110

A customer proof-of-concept scenario describes: A hotel upgrades APs to wider channels while cabling and uplinks limit attainable client throughput. Which governance or validation step should be repeated after future changes?

  1. Revalidate lifecycle assumptions and renewal obligations before commercial approval.
  2. Check power and uplink prerequisites before approving AP refresh orders.
  3. Require installation photos and measured post-deployment RF acceptance.
  4. Update WLAN density models after event or device population changes.

Explanation

Correct Answer

B:

Radio capability can be constrained by inadequate power-delivery or wired uplink capacity. Validate each AP's model-specific PoE mode, cabling and uplink speed before finalizing deployment. APs operate without power derating and peak-load traffic fits uplink headroom. A hotel upgrades APs to wider channels while cabling and uplinks limit attainable client throughput.

Incorrect Answers

A:

Initial acquisition price alone cannot represent a network solution's long-term total cost, while radio capability can be constrained by inadequate power-delivery or wired uplink capacity.

C:

A hotel upgrades APs to wider channels while cabling and uplinks limit attainable client throughput. Antenna pattern, mounting height and obstruction placement shape the usable WLAN coverage footprint, but radio capability can be constrained by inadequate power-delivery or wired uplink capacity. Require installation photos and measured post-deployment RF acceptance.

D:

A hotel upgrades APs to wider channels while cabling and uplinks limit attainable client throughput. High client density and airtime contention can limit per-user throughput even when received signal is strong, whereas radio capability can be constrained by inadequate power-delivery or wired uplink capacity.

Question 111

A customer proof-of-concept scenario describes: An office technician connects two unmanaged uplinks between edge switches and a broadcast storm overwhelms the LAN. Which measurement would MOST convincingly confirm the design is working?

  1. A controlled cross-device event has timestamps within the documented correlation tolerance.
  2. Voice latency, jitter and bulk throughput remain within separate agreed service limits under controlled congestion.
  3. Broadcast volume and MAC movement return to expected levels while the approved alternate path remains available.
  4. Neighbor entries converge on the active device MAC and bidirectional traffic resumes without permanent static mappings.

Explanation

Correct Answer

C:

An office technician connects two unmanaged uplinks between edge switches and a broadcast storm overwhelms the LAN. An uncontrolled Layer 2 loop can replicate frames and exhaust switch forwarding capacity. Remove the uncontrolled loop and design supported STP or an appropriate loop-free redundant topology.

Incorrect Answers

A:

An office technician connects two unmanaged uplinks between edge switches and a broadcast storm overwhelms the LAN. Unsynchronized device clocks distort event sequence and undermine incident root-cause analysis, but an uncontrolled Layer 2 loop can replicate frames and exhaust switch forwarding capacity. Voice latency, jitter and bulk throughput remain within separate agreed service limits under controlled congestion.

B:

An office technician connects two unmanaged uplinks between edge switches and a broadcast storm overwhelms the LAN. Unclassified traffic competes for limited egress bandwidth and can degrade delay-sensitive applications, whereas an uncontrolled Layer 2 loop can replicate frames and exhaust switch forwarding capacity.

D:

An office technician connects two unmanaged uplinks between edge switches and a broadcast storm overwhelms the LAN. An outdated IPv4 neighbor entry can direct frames to a MAC that no longer owns the destination IP, while an uncontrolled Layer 2 loop can replicate frames and exhaust switch forwarding capacity.

Question 112

A fictional pre-sales network assessment observes: A growing logistics company requests future-proof networking while its purchase list covers only current endpoint counts. Which controlled design change MOST directly addresses this failure?

  1. Define observable test cases for critical workloads, failure paths, policy enforcement and managed rollout.
  2. Specify documented standards, interface versions, data formats and integration proof tests before contracting.
  3. Assess team capabilities, support coverage and automation needs; simplify or arrange managed services where suitable.
  4. Forecast ports, throughput, client density, power and uplink demand with defined growth and redundancy margins.

Explanation

Correct Answer

D:

A growing logistics company requests future-proof networking while its purchase list covers only current endpoint counts. Capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment. Scalability is a quantified requirement based on expected demand and upgrade boundaries. A forecasted peak-load model meets performance targets with documented reserve capacity.

Incorrect Answers

A:

A proposal lacking objective acceptance evidence cannot demonstrate that promised functions work in context, whereas capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment.

B:

A growing logistics company requests future-proof networking while its purchase list covers only current endpoint counts. Integration expectations fail when required interfaces and supported protocol versions are not validated, while capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment.

C:

Operational skills and staffing limit which features and deployment models can be supported reliably, but capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment.

Question 113

Consider a simulated customer-network deployment: A data center starts a new routed rack and border policy filters the leaf's loopback reachability from the spines. Which architectural weakness BEST accounts for this customer outcome?

  1. A fabric routing underlay needs accurate neighbor policies and reachability for infrastructure prefixes.
  2. A non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks.
  3. Redundant multihomed Ethernet connections require coordinated forwarding and loop avoidance mechanisms.
  4. Port line rates alone do not describe achievable concurrent fabric capacity under oversubscription.

Explanation

Correct Answer

A:

A data center starts a new routed rack and border policy filters the leaf's loopback reachability from the spines. A fabric routing underlay needs accurate neighbor policies and reachability for infrastructure prefixes. Audit BGP sessions and allowed infrastructure prefixes at each leaf and spine boundary. The intended loopbacks have valid next hops and unapproved tenant routes are absent from underlay peers.

Incorrect Answers

B:

A non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks, while a fabric routing underlay needs accurate neighbor policies and reachability for infrastructure prefixes.

C:

A data center starts a new routed rack and border policy filters the leaf's loopback reachability from the spines. Redundant multihomed Ethernet connections require coordinated forwarding and loop avoidance mechanisms, but a fabric routing underlay needs accurate neighbor policies and reachability for infrastructure prefixes.

D:

Port line rates alone do not describe achievable concurrent fabric capacity under oversubscription, whereas a fabric routing underlay needs accurate neighbor policies and reachability for infrastructure prefixes.

Question 114

Consider a simulated customer-network deployment: A metropolitan backbone has two paths but latency-sensitive workloads never use the intended engineered route. How should the team verify that the customer requirement is satisfied?

  1. Routes and traffic are visible only in authorized VPN contexts during isolation tests.
  2. Path tracing confirms traffic follows an approved eligible route and meets its latency objectives.
  3. A documented capacity assessment and representative traffic test meet the required WAN service targets.
  4. Validated failure, broadcast-scope and port-capacity tests meet the customer's scenario requirements.

Explanation

Correct Answer

B:

A metropolitan backbone has two paths but latency-sensitive workloads never use the intended engineered route. SRv6 policy intent must be compatible with valid segments and underlay routing to actually steer traffic. Validate supported SRv6 segment lists and constraint policies against current topology and service requirements.

Incorrect Answers

A:

L3VPN segmentation depends on controlled per-VRF route distribution and route-target policy, but SRv6 policy intent must be compatible with valid segments and underlay routing to actually steer traffic.

C:

A metropolitan backbone has two paths but latency-sensitive workloads never use the intended engineered route. WAN router models must align with actual forwarding, routing-scale, interface and resilience requirements, whereas SRv6 policy intent must be compatible with valid segments and underlay routing to actually steer traffic.

D:

A metropolitan backbone has two paths but latency-sensitive workloads never use the intended engineered route. Campus topology should match segmentation, scale, operations and resiliency requirements rather than a fixed diagram, while SRv6 policy intent must be compatible with valid segments and underlay routing to actually steer traffic. Validated failure, broadcast-scope and port-capacity tests meet the customer's scenario requirements.

Question 115

An imaginary enterprise networking change reveals: A chain store receives a local template that silently supersedes the intended enterprise-wide segmentation rule. Which underlying network design or operational mechanism MOST directly explains this observation?

  1. Safe SD-WAN replacement requires explicit binding of new hardware identity to the intended site's policy and routes.
  2. SD-WAN and traditional routing domains must exchange only approved reachable prefixes with bidirectional return paths.
  3. Conflicting global and site-level policy inheritance can create inconsistent effective branch behavior.
  4. SD-WAN tunnel health alone does not measure the end-user quality of application flows.

Explanation

Correct Answer

C:

A chain store receives a local template that silently supersedes the intended enterprise-wide segmentation rule. Conflicting global and site-level policy inheritance can create inconsistent effective branch behavior. Inspect policy precedence and remove obsolete exceptions through approved controller workflows. Effective running policies match approved intent across representative sites after controlled rollout.

Incorrect Answers

A:

Safe SD-WAN replacement requires explicit binding of new hardware identity to the intended site's policy and routes, whereas conflicting global and site-level policy inheritance can create inconsistent effective branch behavior.

B:

SD-WAN and traditional routing domains must exchange only approved reachable prefixes with bidirectional return paths, while conflicting global and site-level policy inheritance can create inconsistent effective branch behavior.

D:

SD-WAN tunnel health alone does not measure the end-user quality of application flows, but conflicting global and site-level policy inheritance can create inconsistent effective branch behavior.

Question 116

An imaginary enterprise networking change reveals: A regional business deploys a small access switch in the campus core without enough uplink and route capabilities. Which underlying network design or operational mechanism MOST directly explains this observation?

  1. Location-dependent ACL assumptions can conflict with a design seeking identity-based free mobility.
  2. PoE port count alone does not guarantee enough power for the connected device class and aggregate load.
  3. Network admission decisions need a correctly configured authentication method and safe failure behavior.
  4. Switch product-family and model selection must follow verified campus function, port capacity and availability requirements.

Explanation

Correct Answer

D:

A regional business deploys a small access switch in the campus core without enough uplink and route capabilities. Switch product-family and model selection must follow verified campus function, port capacity and availability requirements. Choose supported CloudEngine campus switching models according to access, aggregation or core role and port needs. Product data-sheet capabilities and a staged traffic test meet the documented role-specific requirements.

Incorrect Answers

A:

A regional business deploys a small access switch in the campus core without enough uplink and route capabilities. Location-dependent ACL assumptions can conflict with a design seeking identity-based free mobility, while switch product-family and model selection must follow verified campus function, port capacity and availability requirements.

B:

An imaginary enterprise networking change reveals: A regional business deploys a small access switch in the campus core without enough uplink and route capabilities. A regional business deploys a small access switch in the campus core without enough uplink and route capabilities. PoE port count alone does not guarantee enough power for the connected device class and aggregate load, but switch product-family and model selection must follow verified campus function, port capacity and availability requirements.

C:

Network admission decisions need a correctly configured authentication method and safe failure behavior, whereas switch product-family and model selection must follow verified campus function, port capacity and availability requirements.

Question 117

A customer proof-of-concept scenario describes: A customer moves to Wi-Fi-enabled inventory scanners yet the presales model assumes static device density for five years. What long-term safeguard should the design handoff establish?

  1. Review capacity forecasts after new sites, users or application rollouts.
  2. Review service-level objectives at design, acceptance and major change milestones.
  3. Reassess hierarchy choice after material changes in campus size and criticality.
  4. Include shared-risk analysis in every multi-site resilience proposal.

Explanation

Correct Answer

A:

Capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment. Forecast ports, throughput, client density, power and uplink demand with defined growth and redundancy margins. A forecasted peak-load model meets performance targets with documented reserve capacity. A customer moves to Wi-Fi-enabled inventory scanners yet the presales model assumes static device density for five years.

Incorrect Answers

B:

A customer moves to Wi-Fi-enabled inventory scanners yet the presales model assumes static device density for five years. Unmeasurable service promises cannot guide topology choice or objective acceptance testing, but capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment. Review service-level objectives at design, acceptance and major change milestones.

C:

Campus topology should match segmentation, scale, operations and resiliency requirements rather than a fixed diagram, whereas capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment.

D:

Component duplication alone does not eliminate common physical and provider failure domains, while capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment.

Question 118

A fictional pre-sales network assessment observes: A manufacturing branch has working local internet yet no authorized SD-WAN overlay connectivity to its private services. Which measurement would MOST convincingly confirm the design is working?

  1. The new branch device takes the correct site identity while the old device can no longer enroll.
  2. Authorized branch-to-HQ applications pass through established secure tunnels with correct overlay routes.
  3. Public destinations see expected translated sources and failover continues without leaking RFC1918 addresses.
  4. The device resolves its assigned service hostname and completes a secure registration exchange.

Explanation

Correct Answer

B:

A manufacturing branch has working local internet yet no authorized SD-WAN overlay connectivity to its private services. Underlay connectivity alone does not prove the SD-WAN overlay's authentication, routing and tunnel state. Validate overlay endpoint identity, approved tunnel parameters and control-plane reachability before traffic activation.

Incorrect Answers

A:

A manufacturing branch has working local internet yet no authorized SD-WAN overlay connectivity to its private services. Safe SD-WAN replacement requires explicit binding of new hardware identity to the intended site's policy and routes, whereas underlay connectivity alone does not prove the SD-WAN overlay's authentication, routing and tunnel state.

C:

A manufacturing branch has working local internet yet no authorized SD-WAN overlay connectivity to its private services. Internet egress often requires NAT and correct policy binding to the active underlay interface, while underlay connectivity alone does not prove the SD-WAN overlay's authentication, routing and tunnel state.

D:

Management endpoint discovery depends on working resolver and route configuration in addition to local link health, but underlay connectivity alone does not prove the SD-WAN overlay's authentication, routing and tunnel state.

Question 119

A fictional pre-sales network assessment observes: A new branch can reach the internet by IP but fails to contact its SD-WAN management service by the configured domain name. What prioritized technical adjustment should the presales plan include?

  1. Validate overlay endpoint identity, approved tunnel parameters and control-plane reachability before traffic activation.
  2. Execute the supported device replacement workflow, revoke old credentials and validate restored site configuration.
  3. Repair supported DNS resolution and reachability to approved SD-WAN controller or registration services.
  4. Classify delay-sensitive traffic and apply appropriate supported SD-WAN QoS and rate controls.

Explanation

Correct Answer

C:

A new branch can reach the internet by IP but fails to contact its SD-WAN management service by the configured domain name. Management endpoint discovery depends on working resolver and route configuration in addition to local link health. Automation workflows require trustworthy reachability to the correct control endpoints. The device resolves its assigned service hostname and completes a secure registration exchange.

Incorrect Answers

A:

A new branch can reach the internet by IP but fails to contact its SD-WAN management service by the configured domain name. Underlay connectivity alone does not prove the SD-WAN overlay's authentication, routing and tunnel state, while management endpoint discovery depends on working resolver and route configuration in addition to local link health.

B:

Safe SD-WAN replacement requires explicit binding of new hardware identity to the intended site's policy and routes, but management endpoint discovery depends on working resolver and route configuration in addition to local link health.

D:

A new branch can reach the internet by IP but fails to contact its SD-WAN management service by the configured domain name. Steering alone cannot protect real-time sessions against contention on a congested egress link, whereas management endpoint discovery depends on working resolver and route configuration in addition to local link health.

Question 120

A hypothetical customer planning meeting reports: A customer calls a branch design redundant because it has two switches even though both use one upstream power feed. What recurring review control BEST prevents this class of issue?

  1. Attach a measurable acceptance plan to every presales architecture approval.
  2. Revalidate lifecycle assumptions and renewal obligations before commercial approval.
  3. Require operator acceptance and training evidence before production handover.
  4. Include shared-risk analysis in every multi-site resilience proposal.

Explanation

Correct Answer

D:

Component duplication alone does not eliminate common physical and provider failure domains. Map independent paths, power, conduits and devices to the customer-approved failure tolerance model. An authorized single-domain failure drill maintains the specified critical services. A customer calls a branch design redundant because it has two switches even though both use one upstream power feed.

Incorrect Answers

A:

A proposal lacking objective acceptance evidence cannot demonstrate that promised functions work in context, but component duplication alone does not eliminate common physical and provider failure domains.

B:

A customer calls a branch design redundant because it has two switches even though both use one upstream power feed. Initial acquisition price alone cannot represent a network solution's long-term total cost, whereas component duplication alone does not eliminate common physical and provider failure domains.

C:

A customer calls a branch design redundant because it has two switches even though both use one upstream power feed. Operational skills and staffing limit which features and deployment models can be supported reliably, while component duplication alone does not eliminate common physical and provider failure domains.

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU (H19-301) Practice Tests