McAfee Secure

Exam Code: H19-301

Exam Name: Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Certification Provider: Huawei

Corresponding Certification: HCPA-IP Network

Huawei H19-301 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

508 Questions & Answers with Testing Engine

"Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU Exam", also known as H19-301 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H19-301 Exam Engine. Your H19-301 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H19-301 Practice Test 35

Question 340

An imaginary enterprise networking change reveals: A regional business deploys a small access switch in the campus core without enough uplink and route capabilities. Which controlled design change MOST directly addresses this failure?

  1. Apply supported BPDU guard or edge-port policy only at appropriate interfaces and review uplink roles.
  2. Provision supported gateway SVIs and upstream routing at the approved distribution or fabric boundary.
  3. Collect supported port counters, path telemetry and service measurements with iMaster NCE-Campus where appropriate.
  4. Choose supported CloudEngine campus switching models according to access, aggregation or core role and port needs.

Explanation

Correct Answer

D:

A regional business deploys a small access switch in the campus core without enough uplink and route capabilities. Switch product-family and model selection must follow verified campus function, port capacity and availability requirements. Device form factor is not a substitute for matching platform capabilities to intended network role. Product data-sheet capabilities and a staged traffic test meet the documented role-specific requirements.

Incorrect Answers

A:

A regional business deploys a small access switch in the campus core without enough uplink and route capabilities. Misapplied STP edge and protection settings can allow unsafe topology changes or disable legitimate links, whereas switch product-family and model selection must follow verified campus function, port capacity and availability requirements.

B:

Inter-VLAN communication requires correctly placed Layer 3 interfaces and explicit routing or policy, while switch product-family and model selection must follow verified campus function, port capacity and availability requirements.

C:

A regional business deploys a small access switch in the campus core without enough uplink and route capabilities. A healthy interface state does not establish end-to-end campus application experience, but switch product-family and model selection must follow verified campus function, port capacity and availability requirements.

Question 341

A customer proof-of-concept scenario describes: A small campus merges two routed segments but a manually configured OSPF area differs across the link. Which architectural weakness BEST accounts for this customer outcome?

  1. OSPF neighbors on a link must have compatible area and selected protocol parameters before exchanging routes.
  2. An uncontrolled Layer 2 loop can replicate frames and exhaust switch forwarding capacity.
  3. Unclassified traffic competes for limited egress bandwidth and can degrade delay-sensitive applications.
  4. Aggregated Ethernet links require compatible peer configuration and member state to forward predictably.

Explanation

Correct Answer

A:

A small campus merges two routed segments but a manually configured OSPF area differs across the link. OSPF neighbors on a link must have compatible area and selected protocol parameters before exchanging routes. Correct the routed interface OSPF area and verify essential hello and authentication settings. The intended adjacency reaches full state and authorized prefixes appear in the route table.

Incorrect Answers

B:

An uncontrolled Layer 2 loop can replicate frames and exhaust switch forwarding capacity, while OSPF neighbors on a link must have compatible area and selected protocol parameters before exchanging routes.

C:

Unclassified traffic competes for limited egress bandwidth and can degrade delay-sensitive applications, but OSPF neighbors on a link must have compatible area and selected protocol parameters before exchanging routes.

D:

Aggregated Ethernet links require compatible peer configuration and member state to forward predictably, whereas OSPF neighbors on a link must have compatible area and selected protocol parameters before exchanging routes.

Question 342

A customer proof-of-concept scenario describes: A national chain sends hundreds of unconfigured routers to outlets but has no approved site-to-serial mapping or enrollment record. Which architectural weakness BEST accounts for this customer outcome?

  1. Steering alone cannot protect real-time sessions against contention on a congested egress link.
  2. Zero-touch deployment fails when device identity, onboarding credentials and site templates are not bound correctly.
  3. Coarse traffic identification cannot guarantee correct application-based policies for diverse modern flows.
  4. Local breakout is inappropriate where business policy requires traffic to traverse centralized enforcement.

Explanation

Correct Answer

B:

A national chain sends hundreds of unconfigured routers to outlets but has no approved site-to-serial mapping or enrollment record. Zero-touch deployment fails when device identity, onboarding credentials and site templates are not bound correctly. Enroll each authorized branch device using supported Huawei SD-WAN ZTP methods and verified site assignments. An untouched factory-state device registers only to its intended site and receives approved policy.

Incorrect Answers

A:

A national chain sends hundreds of unconfigured routers to outlets but has no approved site-to-serial mapping or enrollment record. Steering alone cannot protect real-time sessions against contention on a congested egress link, but zero-touch deployment fails when device identity, onboarding credentials and site templates are not bound correctly.

C:

A national chain sends hundreds of unconfigured routers to outlets but has no approved site-to-serial mapping or enrollment record. Coarse traffic identification cannot guarantee correct application-based policies for diverse modern flows, whereas zero-touch deployment fails when device identity, onboarding credentials and site templates are not bound correctly. Coarse traffic identification cannot guarantee correct application-based policies for diverse modern flows.

D:

Local breakout is inappropriate where business policy requires traffic to traverse centralized enforcement, while zero-touch deployment fails when device identity, onboarding credentials and site templates are not bound correctly.

Question 343

A hypothetical customer planning meeting reports: A virtualization cluster distributes workloads across racks while the fabric design gives only one uplink route between leafs. Which controlled design change MOST directly addresses this failure?

  1. Evaluate supported DCI routing, controlled extension and workload mobility requirements before designing the inter-site segment.
  2. Correct supported EVPN VXLAN mapping and verify VTEP policy across affected fabric nodes.
  3. Design supported CloudEngine leaf-spine connections with appropriate parallel routed paths and capacity.
  4. Audit BGP sessions and allowed infrastructure prefixes at each leaf and spine boundary.

Explanation

Correct Answer

C:

A virtualization cluster distributes workloads across racks while the fabric design gives only one uplink route between leafs. A non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks. Leaf-spine fabrics use route scale and path diversity to serve distributed workloads. East-west throughput and failure drills satisfy the customer demand model across alternative spine paths.

Incorrect Answers

A:

Stretched Layer 2 across sites increases fault propagation and depends on appropriate convergence and loop controls, whereas a non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks.

B:

Overlay tenant isolation requires consistent VNI, route-target and virtual-routing context mapping, while a non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks.

D:

A fabric routing underlay needs accurate neighbor policies and reachability for infrastructure prefixes, but a non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks.

Question 344

A hypothetical customer planning meeting reports: A branch security gateway permits outbound application packets while return flows traverse another interface without state. Which controlled design change MOST directly addresses this failure?

  1. Apply supported DNS or web filtering with controlled resolver policies and verified exception management.
  2. Define appropriate Huawei firewall zone membership and specific approved inter-zone access rules.
  3. Integrate supported network and security events into an approved monitoring workflow with synchronized timestamps.
  4. Align routing and supported session synchronization with the chosen security policy boundary.

Explanation

Correct Answer

D:

A branch security gateway permits outbound application packets while return flows traverse another interface without state. Stateful firewall session acceptance depends on coherent bidirectional paths and supported failover state handling. Permitting outbound packets does not eliminate return-path session tracking requirements. A controlled session and failover test preserves or reestablishes authorized flows according to the design.

Incorrect Answers

A:

Domain and content controls must account for resolver routing and permitted application access paths, while stateful firewall session acceptance depends on coherent bidirectional paths and supported failover state handling.

B:

A branch security gateway permits outbound application packets while return flows traverse another interface without state. Firewall network zones need explicit least-privilege security policies between distinct trust levels, but stateful firewall session acceptance depends on coherent bidirectional paths and supported failover state handling.

C:

A branch security gateway permits outbound application packets while return flows traverse another interface without state. Security visibility fails when events lack centralized correlation, time alignment and response ownership, whereas stateful firewall session acceptance depends on coherent bidirectional paths and supported failover state handling. Align routing and supported session synchronization with the chosen security policy boundary.

Question 345

Consider a simulated customer-network deployment: A government client asks for multivendor management but the proposal assumes an undocumented proprietary telemetry export. What is the MOST appropriate response for the described deployment?

  1. Specify documented standards, interface versions, data formats and integration proof tests before contracting.
  2. Model hardware, optics, services, energy, licensing, support, replacement and operational costs over an agreed horizon.
  3. Conduct validated site discovery and reconcile every physical and logical endpoint with stakeholder requirements.
  4. Define observable test cases for critical workloads, failure paths, policy enforcement and managed rollout.

Explanation

Correct Answer

A:

A government client asks for multivendor management but the proposal assumes an undocumented proprietary telemetry export. Integration expectations fail when required interfaces and supported protocol versions are not validated. Interoperability must be demonstrated at concrete interfaces rather than asserted from product category labels. A representative external tool collects telemetry and performs approved workflows through supported interfaces.

Incorrect Answers

B:

Initial acquisition price alone cannot represent a network solution's long-term total cost, but integration expectations fail when required interfaces and supported protocol versions are not validated.

C:

A presales bill of materials cannot be accurate when site, device and connectivity inventories are incomplete, whereas integration expectations fail when required interfaces and supported protocol versions are not validated.

D:

A government client asks for multivendor management but the proposal assumes an undocumented proprietary telemetry export. A proposal lacking objective acceptance evidence cannot demonstrate that promised functions work in context, while integration expectations fail when required interfaces and supported protocol versions are not validated.

Question 346

A presales engineer reviews this invented requirement: An enterprise proposes new core switches while assuming a legacy device supports the desired routing and telemetry features. Which proposed remedy BEST aligns with the customer scenario?

  1. Document the data path, control responsibilities and management-system dependencies separately.
  2. Inventory firmware, optics, licenses, protocols and feature support before selecting the transition architecture.
  3. Conduct validated site discovery and reconcile every physical and logical endpoint with stakeholder requirements.
  4. Map independent paths, power, conduits and devices to the customer-approved failure tolerance model.

Explanation

Correct Answer

B:

An enterprise proposes new core switches while assuming a legacy device supports the desired routing and telemetry features. An unverified installed-base compatibility assumption can invalidate a solution migration plan. Successful brownfield designs respect supported interoperability and staged change constraints. A limited lab pilot shows agreed protocol and management compatibility between old and new components.

Incorrect Answers

A:

A presales engineer reviews this invented requirement: An enterprise proposes new core switches while assuming a legacy device supports the desired routing and telemetry features. An enterprise proposes new core switches while assuming a legacy device supports the desired routing and telemetry features. Management or orchestration systems do not automatically replace the forwarding functions of network devices, whereas an unverified installed-base compatibility assumption can invalidate a solution migration plan.

C:

An enterprise proposes new core switches while assuming a legacy device supports the desired routing and telemetry features. A presales bill of materials cannot be accurate when site, device and connectivity inventories are incomplete, while an unverified installed-base compatibility assumption can invalidate a solution migration plan.

D:

A presales engineer reviews this invented requirement: An enterprise proposes new core switches while assuming a legacy device supports the desired routing and telemetry features. An enterprise proposes new core switches while assuming a legacy device supports the desired routing and telemetry features. Component duplication alone does not eliminate common physical and provider failure domains, but an unverified installed-base compatibility assumption can invalidate a solution migration plan.

Question 347

During an authorized fictional design review, the team discovers: A media cluster expands compute accelerators while failing to update northbound switch capacity forecasts. What recurring review control BEST prevents this class of issue?

  1. Validate BGP route-policy changes against the infrastructure prefix inventory.
  2. Reassess oversubscription and spine capacity after compute rack expansion.
  3. Update oversubscription models as workloads and rack populations change.
  4. Conduct shared-risk reviews before signing off dual-fabric availability.

Explanation

Correct Answer

C:

Port line rates alone do not describe achievable concurrent fabric capacity under oversubscription. Model expected east-west and north-south demand with uplink ratios and resilience headroom. Peak concurrency tests meet throughput and latency limits without saturating shared uplinks. A media cluster expands compute accelerators while failing to update northbound switch capacity forecasts.

Incorrect Answers

A:

A fabric routing underlay needs accurate neighbor policies and reachability for infrastructure prefixes, while port line rates alone do not describe achievable concurrent fabric capacity under oversubscription.

B:

A media cluster expands compute accelerators while failing to update northbound switch capacity forecasts. A non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks, but port line rates alone do not describe achievable concurrent fabric capacity under oversubscription.

D:

A media cluster expands compute accelerators while failing to update northbound switch capacity forecasts. High-availability fabric claims fail when parallel logical paths share an unmodeled physical dependency, whereas port line rates alone do not describe achievable concurrent fabric capacity under oversubscription.

Question 348

During an authorized fictional design review, the team discovers: A retail SD-WAN configuration identifies only destination ports and misclassifies web-hosted payment traffic as bulk browsing. Which controlled design change MOST directly addresses this failure?

  1. Execute the supported device replacement workflow, revoke old credentials and validate restored site configuration.
  2. Apply supported Huawei SD-WAN quality-based steering to measured loss, latency and jitter targets.
  3. Classify delay-sensitive traffic and apply appropriate supported SD-WAN QoS and rate controls.
  4. Use supported application identification or well-governed custom definitions and verify policy precedence.

Explanation

Correct Answer

D:

A retail SD-WAN configuration identifies only destination ports and misclassifies web-hosted payment traffic as bulk browsing. Coarse traffic identification cannot guarantee correct application-based policies for diverse modern flows. Correct traffic classification is prerequisite to application-specific transport treatment. Representative traces classify each critical workload into the intended steering and QoS group.

Incorrect Answers

A:

During an authorized fictional design review, the team discovers: A retail SD-WAN configuration identifies only destination ports and misclassifies web-hosted payment traffic as bulk browsing. A retail SD-WAN configuration identifies only destination ports and misclassifies web-hosted payment traffic as bulk browsing. Safe SD-WAN replacement requires explicit binding of new hardware identity to the intended site's policy and routes, but coarse traffic identification cannot guarantee correct application-based policies for diverse modern flows.

B:

Fixed link preference can violate application experience when real link quality changes, whereas coarse traffic identification cannot guarantee correct application-based policies for diverse modern flows.

C:

Steering alone cannot protect real-time sessions against contention on a congested egress link, while coarse traffic identification cannot guarantee correct application-based policies for diverse modern flows.

Question 349

A customer proof-of-concept scenario describes: A data-center administrator manually changes routing on one leaf despite centrally managed iMaster NCE-Fabric intent. Which acceptance test MOST directly demonstrates the target outcome?

  1. The post-change device state matches approved intent and adverse simulations are caught before production.
  2. Representatively loaded RDMA traffic meets loss and tail-latency criteria without congestion spreading uncontrollably.
  3. A controlled shared-component outage stays within documented impact limits or is explicitly mitigated.
  4. The endpoints exchange test overlay traffic without outer-route or fragmentation failures.

Explanation

Correct Answer

A:

A data-center administrator manually changes routing on one leaf despite centrally managed iMaster NCE-Fabric intent. Controller-driven fabrics can drift if manual device state conflicts with the authoritative design model. Apply supported iMaster NCE-Fabric change plans with preview, validation and controlled rollback.

Incorrect Answers

B:

A data-center administrator manually changes routing on one leaf despite centrally managed iMaster NCE-Fabric intent. RDMA-based Ethernet storage may require supported congestion management and low-loss fabric settings to avoid severe performance loss, whereas controller-driven fabrics can drift if manual device state conflicts with the authoritative design model.

C:

A data-center administrator manually changes routing on one leaf despite centrally managed iMaster NCE-Fabric intent. High-availability fabric claims fail when parallel logical paths share an unmodeled physical dependency, while controller-driven fabrics can drift if manual device state conflicts with the authoritative design model.

D:

A data-center administrator manually changes routing on one leaf despite centrally managed iMaster NCE-Fabric intent. VXLAN encapsulation requires Layer 3 reachability between the tunnel endpoints carrying its outer packets, but controller-driven fabrics can drift if manual device state conflicts with the authoritative design model. The endpoints exchange test overlay traffic without outer-route or fragmentation failures.

Question 350

A fictional pre-sales network assessment observes: A retailer backhauls all cloud collaboration traffic through headquarters and experiences avoidable WAN latency. Which proposed remedy BEST aligns with the customer scenario?

  1. Configure supported secure tunnel identities and negotiated IPsec parameters consistent with customer security standards.
  2. Evaluate supported local breakout with explicit DNS, NAT, inspection and enterprise security controls.
  3. Configure supported route redistribution and filters between overlay, hub and legacy network boundaries.
  4. Apply supported Huawei SD-WAN quality-based steering to measured loss, latency and jitter targets.

Explanation

Correct Answer

B:

A retailer backhauls all cloud collaboration traffic through headquarters and experiences avoidable WAN latency. Unnecessary centralized internet egress may increase latency and consume costly WAN bandwidth. Internet egress location is a security-and-performance design choice, not only a routing shortcut. SaaS performance improves while approved logging and security controls remain effective at the branch.

Incorrect Answers

A:

Overlay encrypted tunnel availability depends on compatible identities, algorithms and lifetime policy, while unnecessary centralized internet egress may increase latency and consume costly WAN bandwidth.

C:

SD-WAN and traditional routing domains must exchange only approved reachable prefixes with bidirectional return paths, but unnecessary centralized internet egress may increase latency and consume costly WAN bandwidth.

D:

A retailer backhauls all cloud collaboration traffic through headquarters and experiences avoidable WAN latency. Fixed link preference can violate application experience when real link quality changes, whereas unnecessary centralized internet egress may increase latency and consume costly WAN bandwidth.

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU (H19-301) Practice Tests