McAfee Secure

Exam Code: H19-301

Exam Name: Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Certification Provider: Huawei

Corresponding Certification: HCPA-IP Network

Huawei H19-301 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

508 Questions & Answers with Testing Engine

"Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU Exam", also known as H19-301 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H19-301 Exam Engine. Your H19-301 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H19-301 Practice Test 4

Question 30

A presales engineer reviews this invented requirement: A large office receives intermittent user complaints but lacks path, port and application-level performance evidence. Which governance or validation step should be repeated after future changes?

  1. Add mapping and reachability checks to each virtual campus service rollout.
  2. Review telemetry coverage and alert ownership before campus acceptance.
  3. Include PoE class and peak draw in every access switch expansion worksheet.
  4. Rehearse credential expiry and unauthorized-device tests after NAC policy changes.

Explanation

Correct Answer

B:

A healthy interface state does not establish end-to-end campus application experience. Collect supported port counters, path telemetry and service measurements with iMaster NCE-Campus where appropriate. A measured service incident is correlated to relevant device, path and user-experience evidence. A large office receives intermittent user complaints but lacks path, port and application-level performance evidence.

Incorrect Answers

A:

Overlay segment mapping must match the underlay reachability and intended virtual network identifiers, but a healthy interface state does not establish end-to-end campus application experience.

C:

A large office receives intermittent user complaints but lacks path, port and application-level performance evidence. PoE port count alone does not guarantee enough power for the connected device class and aggregate load, whereas a healthy interface state does not establish end-to-end campus application experience.

D:

Network admission decisions need a correctly configured authentication method and safe failure behavior, while a healthy interface state does not establish end-to-end campus application experience.

Question 31

An imaginary enterprise networking change reveals: A cloud operator creates a new tenant VRF but fails to associate its EVPN routes with the correct L3 service context. Which controlled design change MOST directly addresses this failure?

  1. Map power, cabling, upstream gateway and switch failure domains to the required resilience target.
  2. Design supported CloudEngine leaf-spine connections with appropriate parallel routed paths and capacity.
  3. Correct supported EVPN VXLAN mapping and verify VTEP policy across affected fabric nodes.
  4. Select supported multihoming or link-aggregation design across compatible leaf peers and host NICs.

Explanation

Correct Answer

C:

A cloud operator creates a new tenant VRF but fails to associate its EVPN routes with the correct L3 service context. Overlay tenant isolation requires consistent VNI, route-target and virtual-routing context mapping. Overlay reachability and isolation depend on coherent control-plane identifiers and policy. Tenant test packets reach only intended segments and forbidden cross-tenant paths remain blocked.

Incorrect Answers

A:

A cloud operator creates a new tenant VRF but fails to associate its EVPN routes with the correct L3 service context. High-availability fabric claims fail when parallel logical paths share an unmodeled physical dependency, whereas overlay tenant isolation requires consistent VNI, route-target and virtual-routing context mapping.

B:

A non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks, while overlay tenant isolation requires consistent VNI, route-target and virtual-routing context mapping.

D:

Redundant multihomed Ethernet connections require coordinated forwarding and loop avoidance mechanisms, but overlay tenant isolation requires consistent VNI, route-target and virtual-routing context mapping.

Question 32

During an authorized fictional design review, the team discovers: A regional provider configures a segment-routing policy whose required intermediate node is unreachable. What is the MOST appropriate response for the described deployment?

  1. Provide suitable route and carrier diversity with defined failover policy and capacity.
  2. Document the data path, control responsibilities and management-system dependencies separately.
  3. Repair VRF membership and import/export route-target policy with explicit tenant separation.
  4. Validate supported SRv6 segment lists and constraint policies against current topology and service requirements.

Explanation

Correct Answer

D:

A regional provider configures a segment-routing policy whose required intermediate node is unreachable. SRv6 policy intent must be compatible with valid segments and underlay routing to actually steer traffic. Source-routed service paths require correct segment reachability and control-plane consistency. Path tracing confirms traffic follows an approved eligible route and meets its latency objectives.

Incorrect Answers

A:

Router redundancy cannot offset an outage in a shared single transport path, while SRv6 policy intent must be compatible with valid segments and underlay routing to actually steer traffic.

B:

Management or orchestration systems do not automatically replace the forwarding functions of network devices, but SRv6 policy intent must be compatible with valid segments and underlay routing to actually steer traffic.

C:

L3VPN segmentation depends on controlled per-VRF route distribution and route-target policy, whereas SRv6 policy intent must be compatible with valid segments and underlay routing to actually steer traffic.

Question 33

A customer proof-of-concept scenario describes: A chain-store design connects branch WAN ports to an incompatible module in an auto-generated topology diagram. Which proposed remedy BEST aligns with the customer scenario?

  1. Correct device models, interface modules and link definitions in the verified topology plan.
  2. Check SCT bill of materials against model-specific compatibility, license and service requirements.
  3. Model hardware, optics, services, energy, licensing, support, replacement and operational costs over an agreed horizon.
  4. Collect role, authentication and segmentation requirements and map them to supported policy enforcement points.

Explanation

Correct Answer

A:

A chain-store design connects branch WAN ports to an incompatible module in an auto-generated topology diagram. Physical and logical interfaces in an SCT design must map to supported real product capabilities. A plausible schematic is not proof that every depicted port connection can be implemented. A port-to-port acceptance matrix finds no unsupported links or missing connectivity dependencies.

Incorrect Answers

B:

A chain-store design connects branch WAN ports to an incompatible module in an auto-generated topology diagram. A generated equipment list may be incomplete when mandatory licenses, optics or services are not reconciled, but physical and logical interfaces in an SCT design must map to supported real product capabilities. Check SCT bill of materials against model-specific compatibility, license and service requirements.

C:

Initial acquisition price alone cannot represent a network solution's long-term total cost, whereas physical and logical interfaces in an SCT design must map to supported real product capabilities.

D:

A chain-store design connects branch WAN ports to an incompatible module in an auto-generated topology diagram. Port counts cannot determine the required policy architecture when access depends on user and device identity, while physical and logical interfaces in an SCT design must map to supported real product capabilities.

Question 34

A fictional pre-sales network assessment observes: A city network migrates to centralized automation without checking software interoperability on installed branch gateways. Which governance or validation step should be repeated after future changes?

  1. Draw separate data-plane and management-plane diagrams in design reviews.
  2. Require version and capability checks before committing migration dates or equipment orders.
  3. Revalidate lifecycle assumptions and renewal obligations before commercial approval.
  4. Review capacity forecasts after new sites, users or application rollouts.

Explanation

Correct Answer

B:

An unverified installed-base compatibility assumption can invalidate a solution migration plan. Inventory firmware, optics, licenses, protocols and feature support before selecting the transition architecture. A limited lab pilot shows agreed protocol and management compatibility between old and new components. A city network migrates to centralized automation without checking software interoperability on installed branch gateways.

Incorrect Answers

A:

A city network migrates to centralized automation without checking software interoperability on installed branch gateways. Management or orchestration systems do not automatically replace the forwarding functions of network devices, whereas an unverified installed-base compatibility assumption can invalidate a solution migration plan.

C:

Initial acquisition price alone cannot represent a network solution's long-term total cost, while an unverified installed-base compatibility assumption can invalidate a solution migration plan.

D:

Capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment, but an unverified installed-base compatibility assumption can invalidate a solution migration plan.

Question 35

A fictional pre-sales network assessment observes: A distribution warehouse's mobile scanners disconnect while moving between APs despite ample static coverage. What prioritized technical adjustment should the presales plan include?

  1. Correct antenna orientation and AP location based on measured RF characteristics and venue constraints.
  2. Select supported compliant channels and client resilience settings with a site-specific interference plan.
  3. Test and tune supported fast roaming, security settings and cell boundaries for the actual client devices.
  4. Deploy supported 802.1X or certificate-based WLAN admission with correct server certificate checks.

Explanation

Correct Answer

C:

A distribution warehouse's mobile scanners disconnect while moving between APs despite ample static coverage. Roaming requires suitable RF overlap, client support and compatible authentication or mobility settings. Strong signal at fixed locations does not prove acceptable session continuity during movement. Mobile calls or scanner sessions survive walking tests with bounded handoff interruption.

Incorrect Answers

A:

A distribution warehouse's mobile scanners disconnect while moving between APs despite ample static coverage. Antenna pattern, mounting height and obstruction placement shape the usable WLAN coverage footprint, while roaming requires suitable RF overlap, client support and compatible authentication or mobility settings.

B:

Regulated DFS operation may require channels to change when radar-like signals are detected, but roaming requires suitable RF overlap, client support and compatible authentication or mobility settings.

D:

Enterprise WLAN trust requires individual identity validation and appropriately authenticated network infrastructure, whereas roaming requires suitable RF overlap, client support and compatible authentication or mobility settings.

Question 36

A hypothetical customer planning meeting reports: A regional business deploys a small access switch in the campus core without enough uplink and route capabilities. What observable result BEST validates the recommended correction?

  1. An authorized access-layer outage affects only the planned fault domain and critical routes remain available.
  2. An allowed client reaches approved remote VLAN services while forbidden inter-VLAN paths remain blocked.
  3. Approved devices enter assigned roles and rejected devices cannot reach protected services.
  4. Product data-sheet capabilities and a staged traffic test meet the documented role-specific requirements.

Explanation

Correct Answer

D:

A regional business deploys a small access switch in the campus core without enough uplink and route capabilities. Switch product-family and model selection must follow verified campus function, port capacity and availability requirements. Choose supported CloudEngine campus switching models according to access, aggregation or core role and port needs.

Incorrect Answers

A:

A regional business deploys a small access switch in the campus core without enough uplink and route capabilities. Insufficient hierarchical segmentation expands the blast radius of common campus faults, but switch product-family and model selection must follow verified campus function, port capacity and availability requirements.

B:

Inter-VLAN communication requires correctly placed Layer 3 interfaces and explicit routing or policy, whereas switch product-family and model selection must follow verified campus function, port capacity and availability requirements.

C:

Network admission decisions need a correctly configured authentication method and safe failure behavior, while switch product-family and model selection must follow verified campus function, port capacity and availability requirements.

Question 37

A presales engineer reviews this invented requirement: A data center starts a new routed rack and border policy filters the leaf's loopback reachability from the spines. How should the team verify that the customer requirement is satisfied?

  1. The intended loopbacks have valid next hops and unapproved tenant routes are absent from underlay peers.
  2. Tenant test packets reach only intended segments and forbidden cross-tenant paths remain blocked.
  3. A simulated microburst or path anomaly produces observable correlated evidence at relevant fabric nodes.
  4. Peak concurrency tests meet throughput and latency limits without saturating shared uplinks.

Explanation

Correct Answer

A:

A data center starts a new routed rack and border policy filters the leaf's loopback reachability from the spines. A fabric routing underlay needs accurate neighbor policies and reachability for infrastructure prefixes. Audit BGP sessions and allowed infrastructure prefixes at each leaf and spine boundary.

Incorrect Answers

B:

A data center starts a new routed rack and border policy filters the leaf's loopback reachability from the spines. Overlay tenant isolation requires consistent VNI, route-target and virtual-routing context mapping, whereas a fabric routing underlay needs accurate neighbor policies and reachability for infrastructure prefixes.

C:

Coarse availability signals cannot identify short-lived fabric congestion and path problems, while a fabric routing underlay needs accurate neighbor policies and reachability for infrastructure prefixes.

D:

Port line rates alone do not describe achievable concurrent fabric capacity under oversubscription, but a fabric routing underlay needs accurate neighbor policies and reachability for infrastructure prefixes.

Question 38

A presales engineer reviews this invented requirement: A data center configures VXLAN endpoints while the underlay cannot route to one remote loopback address. Which proposed remedy BEST aligns with the customer scenario?

  1. Design supported CloudEngine leaf-spine connections with appropriate parallel routed paths and capacity.
  2. Restore supported VTEP loopback routes and check MTU for overlay encapsulation along the underlay.
  3. Apply supported iMaster NCE-Fabric change plans with preview, validation and controlled rollback.
  4. Audit BGP sessions and allowed infrastructure prefixes at each leaf and spine boundary.

Explanation

Correct Answer

B:

A data center configures VXLAN endpoints while the underlay cannot route to one remote loopback address. VXLAN encapsulation requires Layer 3 reachability between the tunnel endpoints carrying its outer packets. An overlay cannot compensate for missing underlay IP reachability or encapsulation headroom. The endpoints exchange test overlay traffic without outer-route or fragmentation failures.

Incorrect Answers

A:

A non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks, while VXLAN encapsulation requires Layer 3 reachability between the tunnel endpoints carrying its outer packets.

C:

A presales engineer reviews this invented requirement: A data center configures VXLAN endpoints while the underlay cannot route to one remote loopback address. A data center configures VXLAN endpoints while the underlay cannot route to one remote loopback address. Controller-driven fabrics can drift if manual device state conflicts with the authoritative design model, but VXLAN encapsulation requires Layer 3 reachability between the tunnel endpoints carrying its outer packets.

D:

A data center configures VXLAN endpoints while the underlay cannot route to one remote loopback address. A fabric routing underlay needs accurate neighbor policies and reachability for infrastructure prefixes, whereas VXLAN encapsulation requires Layer 3 reachability between the tunnel endpoints carrying its outer packets.

Question 39

During an authorized fictional design review, the team discovers: A hotel expects new 6 GHz clients to cover the same distant rooms as earlier lower-band radios without surveying. What recurring review control BEST prevents this class of issue?

  1. Require installation photos and measured post-deployment RF acceptance.
  2. Audit WLAN identity and certificate policies during onboarding and offboarding.
  3. Review client-band compatibility and coverage assumptions before changing AP models.
  4. Include DFS and regional regulatory settings in wireless change reviews.

Explanation

Correct Answer

C:

Higher-frequency WLAN operation often has different attenuation, supported client and channel constraints. Select suitable 2.4, 5 or 6 GHz coverage cells and channel width for the verified client ecosystem. Per-band surveys show authorized clients meet signal and throughput targets in intended work areas. A hotel expects new 6 GHz clients to cover the same distant rooms as earlier lower-band radios without surveying.

Incorrect Answers

A:

Antenna pattern, mounting height and obstruction placement shape the usable WLAN coverage footprint, but higher-frequency WLAN operation often has different attenuation, supported client and channel constraints.

B:

Enterprise WLAN trust requires individual identity validation and appropriately authenticated network infrastructure, whereas higher-frequency WLAN operation often has different attenuation, supported client and channel constraints.

D:

Regulated DFS operation may require channels to change when radar-like signals are detected, while higher-frequency WLAN operation often has different attenuation, supported client and channel constraints.

Question 40

A customer proof-of-concept scenario describes: A utility deploys unattended edge gateways but their initial registration tokens are missing or associated with the wrong office. Which durable operating practice most directly reduces recurrence?

  1. Keep application baselines and alarm thresholds current for each critical site.
  2. Review cloud prefix and security changes against on-ramp service acceptance tests.
  3. Revalidate WAN queue policies during bandwidth upgrades and new application onboarding.
  4. Audit enrollment inventory and registration credentials before bulk site shipments.

Explanation

Correct Answer

D:

Zero-touch deployment fails when device identity, onboarding credentials and site templates are not bound correctly. Enroll each authorized branch device using supported Huawei SD-WAN ZTP methods and verified site assignments. An untouched factory-state device registers only to its intended site and receives approved policy. A utility deploys unattended edge gateways but their initial registration tokens are missing or associated with the wrong office.

Incorrect Answers

A:

SD-WAN tunnel health alone does not measure the end-user quality of application flows, whereas zero-touch deployment fails when device identity, onboarding credentials and site templates are not bound correctly.

B:

Cloud access design requires supported regional gateway paths, prefix exchange and authorized security policy, while zero-touch deployment fails when device identity, onboarding credentials and site templates are not bound correctly.

C:

A utility deploys unattended edge gateways but their initial registration tokens are missing or associated with the wrong office. Steering alone cannot protect real-time sessions against contention on a congested egress link, but zero-touch deployment fails when device identity, onboarding credentials and site templates are not bound correctly.

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU (H19-301) Practice Tests