McAfee Secure

Exam Code: H19-301

Exam Name: Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Certification Provider: Huawei

Corresponding Certification: HCPA-IP Network

Huawei H19-301 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

508 Questions & Answers with Testing Engine

"Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU Exam", also known as H19-301 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H19-301 Exam Engine. Your H19-301 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H19-301 Practice Test 53

Question 520

A presales engineer reviews this invented requirement: A virtualization cluster distributes workloads across racks while the fabric design gives only one uplink route between leafs. Which acceptance test MOST directly demonstrates the target outcome?

  1. A simulated microburst or path anomaly produces observable correlated evidence at relevant fabric nodes.
  2. Representatively loaded RDMA traffic meets loss and tail-latency criteria without congestion spreading uncontrollably.
  3. Peak concurrency tests meet throughput and latency limits without saturating shared uplinks.
  4. East-west throughput and failure drills satisfy the customer demand model across alternative spine paths.

Explanation

Correct Answer

D:

A virtualization cluster distributes workloads across racks while the fabric design gives only one uplink route between leafs. A non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks. Design supported CloudEngine leaf-spine connections with appropriate parallel routed paths and capacity.

Incorrect Answers

A:

Coarse availability signals cannot identify short-lived fabric congestion and path problems, whereas a non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks.

B:

A virtualization cluster distributes workloads across racks while the fabric design gives only one uplink route between leafs. RDMA-based Ethernet storage may require supported congestion management and low-loss fabric settings to avoid severe performance loss, while a non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks.

C:

Port line rates alone do not describe achievable concurrent fabric capacity under oversubscription, but a non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks.

Question 521

A presales engineer reviews this invented requirement: A hospital WAN carries interactive consultations and bulk backups on one congested uplink with no traffic-class guarantees. Which acceptance test MOST directly demonstrates the target outcome?

  1. Voice latency, jitter and bulk throughput remain within separate agreed service limits under controlled congestion.
  2. The intended adjacency reaches full state and authorized prefixes appear in the route table.
  3. ARP neighbor tables and connection tests consistently identify only the authorized host at the restored address.
  4. Bidirectional session captures show permitted traffic and valid state during primary and failover routing.

Explanation

Correct Answer

A:

A hospital WAN carries interactive consultations and bulk backups on one congested uplink with no traffic-class guarantees. Unclassified traffic competes for limited egress bandwidth and can degrade delay-sensitive applications. Classify approved real-time traffic and apply supported queue priorities and capacity policing based on measured demands.

Incorrect Answers

B:

OSPF neighbors on a link must have compatible area and selected protocol parameters before exchanging routes, while unclassified traffic competes for limited egress bandwidth and can degrade delay-sensitive applications.

C:

Two active endpoints assigned one IPv4 address can cause unstable neighbor resolution and session loss, but unclassified traffic competes for limited egress bandwidth and can degrade delay-sensitive applications.

D:

Stateful security devices can drop legitimate return packets when forward and return flows bypass the same tracked policy context, whereas unclassified traffic competes for limited egress bandwidth and can degrade delay-sensitive applications.

Question 522

During an authorized fictional design review, the team discovers: A branch adds a private cloud connection but the SD-WAN overlay still advertises only the previous data-center path. Which measurement would MOST convincingly confirm the design is working?

  1. Policy traces show restricted sessions use mandated inspection while allowed web traffic follows separate rules.
  2. Authorized cloud application flows use the selected regional path with measured performance and logged access.
  3. Representative traces classify each critical workload into the intended steering and QoS group.
  4. Concurrent traffic tests meet voice jitter, loss and latency requirements without starving critical data.

Explanation

Correct Answer

B:

A branch adds a private cloud connection but the SD-WAN overlay still advertises only the previous data-center path. Cloud access design requires supported regional gateway paths, prefix exchange and authorized security policy. Enable an approved cloud gateway/on-ramp topology and validate routes, tunnel policy and egress controls.

Incorrect Answers

A:

A branch adds a private cloud connection but the SD-WAN overlay still advertises only the previous data-center path. Local breakout is inappropriate where business policy requires traffic to traverse centralized enforcement, but cloud access design requires supported regional gateway paths, prefix exchange and authorized security policy.

C:

Coarse traffic identification cannot guarantee correct application-based policies for diverse modern flows, whereas cloud access design requires supported regional gateway paths, prefix exchange and authorized security policy.

D:

A branch adds a private cloud connection but the SD-WAN overlay still advertises only the previous data-center path. Steering alone cannot protect real-time sessions against contention on a congested egress link, while cloud access design requires supported regional gateway paths, prefix exchange and authorized security policy.

Question 523

During an authorized fictional design review, the team discovers: A branch router fails and the replacement gets the wrong site template because serial inventory was not transferred. Which governance or validation step should be repeated after future changes?

  1. Reconcile route advertisement boundaries after adding branches, hubs or clouds.
  2. Test NAT policy after adding or switching breakout uplinks.
  3. Reconcile asset and controller records at every gateway replacement.
  4. Schedule peer credential and cipher policy reviews before rotation windows.

Explanation

Correct Answer

C:

Safe SD-WAN replacement requires explicit binding of new hardware identity to the intended site's policy and routes. Execute the supported device replacement workflow, revoke old credentials and validate restored site configuration. The new branch device takes the correct site identity while the old device can no longer enroll. A branch router fails and the replacement gets the wrong site template because serial inventory was not transferred.

Incorrect Answers

A:

A branch router fails and the replacement gets the wrong site template because serial inventory was not transferred. SD-WAN and traditional routing domains must exchange only approved reachable prefixes with bidirectional return paths, whereas safe SD-WAN replacement requires explicit binding of new hardware identity to the intended site's policy and routes.

B:

A branch router fails and the replacement gets the wrong site template because serial inventory was not transferred. Internet egress often requires NAT and correct policy binding to the active underlay interface, while safe SD-WAN replacement requires explicit binding of new hardware identity to the intended site's policy and routes.

D:

Overlay encrypted tunnel availability depends on compatible identities, algorithms and lifetime policy, but safe SD-WAN replacement requires explicit binding of new hardware identity to the intended site's policy and routes.

Question 524

A fictional pre-sales network assessment observes: A branch receives overlay advertisements while return traffic from a cloud VPC lacks routes back to the site's subnets. Which durable operating practice most directly reduces recurrence?

  1. Test underlay and overlay states independently during each branch commissioning.
  2. Trend path quality and tune thresholds for critical applications after network growth.
  3. Schedule peer credential and cipher policy reviews before rotation windows.
  4. Reconcile route advertisement boundaries after adding branches, hubs or clouds.

Explanation

Correct Answer

D:

SD-WAN and traditional routing domains must exchange only approved reachable prefixes with bidirectional return paths. Configure supported route redistribution and filters between overlay, hub and legacy network boundaries. Both directions reach intended private applications with no leaked or missing prefixes. A branch receives overlay advertisements while return traffic from a cloud VPC lacks routes back to the site's subnets.

Incorrect Answers

A:

Underlay connectivity alone does not prove the SD-WAN overlay's authentication, routing and tunnel state, while SD-WAN and traditional routing domains must exchange only approved reachable prefixes with bidirectional return paths.

B:

Fixed link preference can violate application experience when real link quality changes, but SD-WAN and traditional routing domains must exchange only approved reachable prefixes with bidirectional return paths.

C:

Overlay encrypted tunnel availability depends on compatible identities, algorithms and lifetime policy, whereas SD-WAN and traditional routing domains must exchange only approved reachable prefixes with bidirectional return paths.

Question 525

A fictional pre-sales network assessment observes: A national retailer compares router and firewall incident logs that differ by several minutes after a clock drift. Which durable operating practice most directly reduces recurrence?

  1. Audit time-source health and log timestamp coherence during operations readiness checks.
  2. Review BGP prefix-list and policy changes against approved address scope before deployment.
  3. Check DHCP relay, scopes and security controls whenever adding a client VLAN.
  4. Audit edge cabling and spanning-tree protections before adding redundant physical links.

Explanation

Correct Answer

A:

Unsynchronized device clocks distort event sequence and undermine incident root-cause analysis. Synchronize supported network devices to approved time sources and consistent time-zone conventions. A controlled cross-device event has timestamps within the documented correlation tolerance. A national retailer compares router and firewall incident logs that differ by several minutes after a clock drift.

Incorrect Answers

B:

A national retailer compares router and firewall incident logs that differ by several minutes after a clock drift. Unbounded BGP advertisements can leak unintended routes beyond a trust or administrative boundary, but unsynchronized device clocks distort event sequence and undermine incident root-cause analysis.

C:

DHCP broadcast discovery does not inherently cross routers without a relay or local DHCP service, whereas unsynchronized device clocks distort event sequence and undermine incident root-cause analysis.

D:

A national retailer compares router and firewall incident logs that differ by several minutes after a clock drift. An uncontrolled Layer 2 loop can replicate frames and exhaust switch forwarding capacity, while unsynchronized device clocks distort event sequence and undermine incident root-cause analysis. Audit edge cabling and spanning-tree protections before adding redundant physical links.

Question 526

Consider a simulated customer-network deployment: A distribution switch accepts unexpected bridge protocol traffic on a user-facing interface during a cabling mistake. Which governance or validation step should be repeated after future changes?

  1. Reconcile physical labels and discovery-based neighbor inventories after every cabling change.
  2. Audit interface edge classification during closet re-cabling.
  3. Compare device state to controller intent after emergency manual changes.
  4. Include PoE class and peak draw in every access switch expansion worksheet.

Explanation

Correct Answer

B:

Misapplied STP edge and protection settings can allow unsafe topology changes or disable legitimate links. Apply supported BPDU guard or edge-port policy only at appropriate interfaces and review uplink roles. An unauthorized edge switch connection is contained without destabilizing the legitimate campus fabric. A distribution switch accepts unexpected bridge protocol traffic on a user-facing interface during a cabling mistake.

Incorrect Answers

A:

Stale physical connectivity inventories obscure peer identities and increase change risk, whereas misapplied STP edge and protection settings can allow unsafe topology changes or disable legitimate links.

C:

Consider a simulated customer-network deployment: A distribution switch accepts unexpected bridge protocol traffic on a user-facing interface during a cabling mistake. A distribution switch accepts unexpected bridge protocol traffic on a user-facing interface during a cabling mistake. Uncoordinated local and controller-managed configuration creates drift and unpredictable overrides, while misapplied STP edge and protection settings can allow unsafe topology changes or disable legitimate links.

D:

A distribution switch accepts unexpected bridge protocol traffic on a user-facing interface during a cabling mistake. PoE port count alone does not guarantee enough power for the connected device class and aggregate load, but misapplied STP edge and protection settings can allow unsafe topology changes or disable legitimate links.

Question 527

Consider a simulated customer-network deployment: A growing logistics company requests future-proof networking while its purchase list covers only current endpoint counts. Which measurement would MOST convincingly confirm the design is working?

  1. Runbook exercises show the actual support team can execute essential detection, change and recovery tasks.
  2. Test users from each role receive only their authorized network and application access.
  3. A forecasted peak-load model meets performance targets with documented reserve capacity.
  4. An authorized single-domain failure drill maintains the specified critical services.

Explanation

Correct Answer

C:

A growing logistics company requests future-proof networking while its purchase list covers only current endpoint counts. Capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment. Forecast ports, throughput, client density, power and uplink demand with defined growth and redundancy margins.

Incorrect Answers

A:

Consider a simulated customer-network deployment: A growing logistics company requests future-proof networking while its purchase list covers only current endpoint counts. A growing logistics company requests future-proof networking while its purchase list covers only current endpoint counts. Operational skills and staffing limit which features and deployment models can be supported reliably, while capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment.

B:

Port counts cannot determine the required policy architecture when access depends on user and device identity, but capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment.

D:

A growing logistics company requests future-proof networking while its purchase list covers only current endpoint counts. Component duplication alone does not eliminate common physical and provider failure domains, whereas capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment.

Question 528

A presales engineer reviews this invented requirement: A regional government network has dual long-haul routers but only one optical path between its main offices. What recurring review control BEST prevents this class of issue?

  1. Review segment policies after IGP topology and service changes.
  2. Include shared-risk analysis in every multi-site resilience proposal.
  3. Require operator acceptance and training evidence before production handover.
  4. Document optical path diversity and reverify it after carrier circuit changes.

Explanation

Correct Answer

D:

Router redundancy cannot offset an outage in a shared single transport path. Provide suitable route and carrier diversity with defined failover policy and capacity. A planned fiber-cut simulation preserves required traffic within the accepted failover time. A regional government network has dual long-haul routers but only one optical path between its main offices.

Incorrect Answers

A:

A regional government network has dual long-haul routers but only one optical path between its main offices. SRv6 policy intent must be compatible with valid segments and underlay routing to actually steer traffic, but router redundancy cannot offset an outage in a shared single transport path.

B:

A presales engineer reviews this invented requirement: A regional government network has dual long-haul routers but only one optical path between its main offices. A regional government network has dual long-haul routers but only one optical path between its main offices. Component duplication alone does not eliminate common physical and provider failure domains, whereas router redundancy cannot offset an outage in a shared single transport path.

C:

Operational skills and staffing limit which features and deployment models can be supported reliably, while router redundancy cannot offset an outage in a shared single transport path.

Question 529

An imaginary enterprise networking change reveals: A manufacturer requests a campus refresh quote but the design omits two factories and their independent access switches. Which acceptance test MOST directly demonstrates the target outcome?

  1. The accepted design inventory lists each facility, port class, device function and growth assumption.
  2. A documented cost comparison includes all material lifecycle categories and sensitivity assumptions.
  3. Runbook exercises show the actual support team can execute essential detection, change and recovery tasks.
  4. A signed test matrix records input conditions, expected outcomes, actual results and accepted exceptions.

Explanation

Correct Answer

A:

A manufacturer requests a campus refresh quote but the design omits two factories and their independent access switches. A presales bill of materials cannot be accurate when site, device and connectivity inventories are incomplete. Conduct validated site discovery and reconcile every physical and logical endpoint with stakeholder requirements.

Incorrect Answers

B:

A manufacturer requests a campus refresh quote but the design omits two factories and their independent access switches. Initial acquisition price alone cannot represent a network solution's long-term total cost, whereas a presales bill of materials cannot be accurate when site, device and connectivity inventories are incomplete.

C:

Operational skills and staffing limit which features and deployment models can be supported reliably, while a presales bill of materials cannot be accurate when site, device and connectivity inventories are incomplete.

D:

A manufacturer requests a campus refresh quote but the design omits two factories and their independent access switches. A proposal lacking objective acceptance evidence cannot demonstrate that promised functions work in context, but a presales bill of materials cannot be accurate when site, device and connectivity inventories are incomplete.

Question 530

A customer proof-of-concept scenario describes: A national company plans to consolidate departments but never records the identity groups or device roles that need separation. What prioritized technical adjustment should the presales plan include?

  1. Define observable test cases for critical workloads, failure paths, policy enforcement and managed rollout.
  2. Collect role, authentication and segmentation requirements and map them to supported policy enforcement points.
  3. Inventory firmware, optics, licenses, protocols and feature support before selecting the transition architecture.
  4. Forecast ports, throughput, client density, power and uplink demand with defined growth and redundancy margins.

Explanation

Correct Answer

B:

A national company plans to consolidate departments but never records the identity groups or device roles that need separation. Port counts cannot determine the required policy architecture when access depends on user and device identity. Trust policy requirements are architectural inputs, not optional late-stage configuration details. Test users from each role receive only their authorized network and application access.

Incorrect Answers

A:

A proposal lacking objective acceptance evidence cannot demonstrate that promised functions work in context, while port counts cannot determine the required policy architecture when access depends on user and device identity.

C:

A national company plans to consolidate departments but never records the identity groups or device roles that need separation. An unverified installed-base compatibility assumption can invalidate a solution migration plan, but port counts cannot determine the required policy architecture when access depends on user and device identity.

D:

A national company plans to consolidate departments but never records the identity groups or device roles that need separation. Capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment, whereas port counts cannot determine the required policy architecture when access depends on user and device identity.

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU (H19-301) Practice Tests