McAfee Secure

Exam Code: H19-301

Exam Name: Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Certification Provider: Huawei

Corresponding Certification: HCPA-IP Network

Huawei H19-301 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

508 Questions & Answers with Testing Engine

"Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU Exam", also known as H19-301 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H19-301 Exam Engine. Your H19-301 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H19-301 Practice Test 56

Question 550

An imaginary enterprise networking change reveals: A shopping center gives contractor laptops the same VLAN as payment terminals to simplify a temporary deployment. Which architectural weakness BEST accounts for this customer outcome?

  1. Two gateway devices need a coordinated virtual default gateway mechanism or comparable supported failover design.
  2. Untrusted access roles must be isolated from production services even when they share hardware.
  3. Switch product-family and model selection must follow verified campus function, port capacity and availability requirements.
  4. Stale physical connectivity inventories obscure peer identities and increase change risk.

Explanation

Correct Answer

B:

A shopping center gives contractor laptops the same VLAN as payment terminals to simplify a temporary deployment. Untrusted access roles must be isolated from production services even when they share hardware. Assign guest and contractor roles to restricted segments with explicit egress and service policies. Guest clients reach approved internet services but cannot access protected payment or clinical endpoints.

Incorrect Answers

A:

Two gateway devices need a coordinated virtual default gateway mechanism or comparable supported failover design, whereas untrusted access roles must be isolated from production services even when they share hardware.

C:

Switch product-family and model selection must follow verified campus function, port capacity and availability requirements, while untrusted access roles must be isolated from production services even when they share hardware.

D:

Stale physical connectivity inventories obscure peer identities and increase change risk, but untrusted access roles must be isolated from production services even when they share hardware.

Question 551

During an authorized fictional design review, the team discovers: A campus replaces older radios with higher-capacity AirEngine APs but access switches cannot supply the required PoE class. Which governance or validation step should be repeated after future changes?

  1. Update WLAN density models after event or device population changes.
  2. Include shared-risk analysis in every multi-site resilience proposal.
  3. Check power and uplink prerequisites before approving AP refresh orders.
  4. Review service-level objectives at design, acceptance and major change milestones.

Explanation

Correct Answer

C:

Radio capability can be constrained by inadequate power-delivery or wired uplink capacity. Validate each AP's model-specific PoE mode, cabling and uplink speed before finalizing deployment. APs operate without power derating and peak-load traffic fits uplink headroom. A campus replaces older radios with higher-capacity AirEngine APs but access switches cannot supply the required PoE class.

Incorrect Answers

A:

A campus replaces older radios with higher-capacity AirEngine APs but access switches cannot supply the required PoE class. High client density and airtime contention can limit per-user throughput even when received signal is strong, while radio capability can be constrained by inadequate power-delivery or wired uplink capacity.

B:

Component duplication alone does not eliminate common physical and provider failure domains, but radio capability can be constrained by inadequate power-delivery or wired uplink capacity.

D:

Unmeasurable service promises cannot guide topology choice or objective acceptance testing, whereas radio capability can be constrained by inadequate power-delivery or wired uplink capacity.

Question 552

A customer proof-of-concept scenario describes: A customer extends one VLAN across distant data centers and applications encounter broadcast instability and failover loops. Which controlled design change MOST directly addresses this failure?

  1. Apply supported VRF or overlay segmentation and policy enforcement between workload security zones.
  2. Validate compatible DCB, PFC and congestion-control policies only where the chosen transport requires them.
  3. Restore supported VTEP loopback routes and check MTU for overlay encapsulation along the underlay.
  4. Evaluate supported DCI routing, controlled extension and workload mobility requirements before designing the inter-site segment.

Explanation

Correct Answer

D:

A customer extends one VLAN across distant data centers and applications encounter broadcast instability and failover loops. Stretched Layer 2 across sites increases fault propagation and depends on appropriate convergence and loop controls. Inter-site connectivity must address failure domains and application state rather than extend VLANs reflexively. A planned inter-site fault test confines the failure while the intended applications recover within target.

Incorrect Answers

A:

A shared data-center fabric must enforce application security boundaries independently of physical rack topology, but stretched Layer 2 across sites increases fault propagation and depends on appropriate convergence and loop controls.

B:

A customer extends one VLAN across distant data centers and applications encounter broadcast instability and failover loops. RDMA-based Ethernet storage may require supported congestion management and low-loss fabric settings to avoid severe performance loss, whereas stretched Layer 2 across sites increases fault propagation and depends on appropriate convergence and loop controls.

C:

A customer extends one VLAN across distant data centers and applications encounter broadcast instability and failover loops. VXLAN encapsulation requires Layer 3 reachability between the tunnel endpoints carrying its outer packets, while stretched Layer 2 across sites increases fault propagation and depends on appropriate convergence and loop controls.

Question 553

A hypothetical customer planning meeting reports: A campus branch's voice service uses changing ports and its generic QoS category receives no priority treatment. What long-term safeguard should the design handoff establish?

  1. Revalidate application signatures and classification when services or encryption behavior change.
  2. Audit all branch overrides before mass policy publication and verify effective settings.
  3. Trend path quality and tune thresholds for critical applications after network growth.
  4. Review cloud prefix and security changes against on-ramp service acceptance tests.

Explanation

Correct Answer

A:

Coarse traffic identification cannot guarantee correct application-based policies for diverse modern flows. Use supported application identification or well-governed custom definitions and verify policy precedence. Representative traces classify each critical workload into the intended steering and QoS group. A campus branch's voice service uses changing ports and its generic QoS category receives no priority treatment.

Incorrect Answers

B:

Conflicting global and site-level policy inheritance can create inconsistent effective branch behavior, whereas coarse traffic identification cannot guarantee correct application-based policies for diverse modern flows.

C:

A campus branch's voice service uses changing ports and its generic QoS category receives no priority treatment. Fixed link preference can violate application experience when real link quality changes, while coarse traffic identification cannot guarantee correct application-based policies for diverse modern flows.

D:

A campus branch's voice service uses changing ports and its generic QoS category receives no priority treatment. Cloud access design requires supported regional gateway paths, prefix exchange and authorized security policy, but coarse traffic identification cannot guarantee correct application-based policies for diverse modern flows.

Question 554

A hypothetical customer planning meeting reports: A compute fabric plans RoCE traffic over ordinary congested switches without validating congestion and pause behavior. What long-term safeguard should the design handoff establish?

  1. Record L2 extension exceptions and test them after DCI routing changes.
  2. Retest transport loss and congestion after introducing RoCE or changing switch firmware.
  3. Conduct shared-risk reviews before signing off dual-fabric availability.
  4. Validate route-target and VNI inventories before new tenant activation.

Explanation

Correct Answer

B:

RDMA-based Ethernet storage may require supported congestion management and low-loss fabric settings to avoid severe performance loss. Validate compatible DCB, PFC and congestion-control policies only where the chosen transport requires them. Representatively loaded RDMA traffic meets loss and tail-latency criteria without congestion spreading uncontrollably. A compute fabric plans RoCE traffic over ordinary congested switches without validating congestion and pause behavior.

Incorrect Answers

A:

A compute fabric plans RoCE traffic over ordinary congested switches without validating congestion and pause behavior. Stretched Layer 2 across sites increases fault propagation and depends on appropriate convergence and loop controls, while rDMA-based Ethernet storage may require supported congestion management and low-loss fabric settings to avoid severe performance loss. Retest transport loss and congestion after introducing RoCE or changing switch firmware.

C:

High-availability fabric claims fail when parallel logical paths share an unmodeled physical dependency, but rDMA-based Ethernet storage may require supported congestion management and low-loss fabric settings to avoid severe performance loss.

D:

A compute fabric plans RoCE traffic over ordinary congested switches without validating congestion and pause behavior. Overlay tenant isolation requires consistent VNI, route-target and virtual-routing context mapping, whereas rDMA-based Ethernet storage may require supported congestion management and low-loss fabric settings to avoid severe performance loss.

Question 555

A presales engineer reviews this invented requirement: A cloud provider uses a fabric controller for provisioning but fails to validate intended changes before wide rollout. Which controlled design change MOST directly addresses this failure?

  1. Validate compatible DCB, PFC and congestion-control policies only where the chosen transport requires them.
  2. Enable supported iMaster NCE-FabricInsight or equivalent flow, queue and path telemetry with approved retention.
  3. Apply supported iMaster NCE-Fabric change plans with preview, validation and controlled rollback.
  4. Design supported CloudEngine leaf-spine connections with appropriate parallel routed paths and capacity.

Explanation

Correct Answer

C:

A cloud provider uses a fabric controller for provisioning but fails to validate intended changes before wide rollout. Controller-driven fabrics can drift if manual device state conflicts with the authoritative design model. Network intent automation requires disciplined validation and configuration ownership. The post-change device state matches approved intent and adverse simulations are caught before production.

Incorrect Answers

A:

RDMA-based Ethernet storage may require supported congestion management and low-loss fabric settings to avoid severe performance loss, but controller-driven fabrics can drift if manual device state conflicts with the authoritative design model.

B:

A cloud provider uses a fabric controller for provisioning but fails to validate intended changes before wide rollout. Coarse availability signals cannot identify short-lived fabric congestion and path problems, whereas controller-driven fabrics can drift if manual device state conflicts with the authoritative design model.

D:

A non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks, while controller-driven fabrics can drift if manual device state conflicts with the authoritative design model.

Question 556

A presales engineer reviews this invented requirement: A university data center installs high-speed server ports but budgets only a tiny aggregate spine uplink for backups. Which underlying network design or operational mechanism MOST directly explains this observation?

  1. Coarse availability signals cannot identify short-lived fabric congestion and path problems.
  2. Stretched Layer 2 across sites increases fault propagation and depends on appropriate convergence and loop controls.
  3. Redundant multihomed Ethernet connections require coordinated forwarding and loop avoidance mechanisms.
  4. Port line rates alone do not describe achievable concurrent fabric capacity under oversubscription.

Explanation

Correct Answer

D:

A university data center installs high-speed server ports but budgets only a tiny aggregate spine uplink for backups. Port line rates alone do not describe achievable concurrent fabric capacity under oversubscription. Model expected east-west and north-south demand with uplink ratios and resilience headroom. Peak concurrency tests meet throughput and latency limits without saturating shared uplinks.

Incorrect Answers

A:

A presales engineer reviews this invented requirement: A university data center installs high-speed server ports but budgets only a tiny aggregate spine uplink for backups. A university data center installs high-speed server ports but budgets only a tiny aggregate spine uplink for backups. Coarse availability signals cannot identify short-lived fabric congestion and path problems, whereas port line rates alone do not describe achievable concurrent fabric capacity under oversubscription.

B:

A presales engineer reviews this invented requirement: A university data center installs high-speed server ports but budgets only a tiny aggregate spine uplink for backups. A university data center installs high-speed server ports but budgets only a tiny aggregate spine uplink for backups. Stretched Layer 2 across sites increases fault propagation and depends on appropriate convergence and loop controls, while port line rates alone do not describe achievable concurrent fabric capacity under oversubscription.

C:

Redundant multihomed Ethernet connections require coordinated forwarding and loop avoidance mechanisms, but port line rates alone do not describe achievable concurrent fabric capacity under oversubscription.

Question 557

An imaginary enterprise networking change reveals: A government client asks for multivendor management but the proposal assumes an undocumented proprietary telemetry export. What is the MOST specific technical cause of the stated issue?

  1. Integration expectations fail when required interfaces and supported protocol versions are not validated.
  2. An unverified installed-base compatibility assumption can invalidate a solution migration plan.
  3. Operational skills and staffing limit which features and deployment models can be supported reliably.
  4. Port counts cannot determine the required policy architecture when access depends on user and device identity.

Explanation

Correct Answer

A:

A government client asks for multivendor management but the proposal assumes an undocumented proprietary telemetry export. Integration expectations fail when required interfaces and supported protocol versions are not validated. Specify documented standards, interface versions, data formats and integration proof tests before contracting. A representative external tool collects telemetry and performs approved workflows through supported interfaces.

Incorrect Answers

B:

An unverified installed-base compatibility assumption can invalidate a solution migration plan, while integration expectations fail when required interfaces and supported protocol versions are not validated.

C:

Operational skills and staffing limit which features and deployment models can be supported reliably, but integration expectations fail when required interfaces and supported protocol versions are not validated.

D:

An imaginary enterprise networking change reveals: A government client asks for multivendor management but the proposal assumes an undocumented proprietary telemetry export. A government client asks for multivendor management but the proposal assumes an undocumented proprietary telemetry export. Port counts cannot determine the required policy architecture when access depends on user and device identity, whereas integration expectations fail when required interfaces and supported protocol versions are not validated.

Question 558

A customer proof-of-concept scenario describes: A retail branch temporarily adds a redundant cable without a loop-control design and network-wide MAC flapping begins. What prioritized technical adjustment should the presales plan include?

  1. Update the approved 802.1Q allowed-VLAN set consistently along the entire intended switching path.
  2. Remove the uncontrolled loop and design supported STP or an appropriate loop-free redundant topology.
  3. Inspect and refresh learned ARP state while verifying valid gratuitous ARP or supported failover signaling.
  4. Correct host masks and default gateway assignment against the approved IP address plan, then validate router interfaces.

Explanation

Correct Answer

B:

A retail branch temporarily adds a redundant cable without a loop-control design and network-wide MAC flapping begins. An uncontrolled Layer 2 loop can replicate frames and exhaust switch forwarding capacity. Ethernet redundancy requires coordinated loop prevention or a supported nonlooping architecture. Broadcast volume and MAC movement return to expected levels while the approved alternate path remains available.

Incorrect Answers

A:

Layer 2 trunk filtering drops tagged traffic for VLANs omitted from the permitted list, but an uncontrolled Layer 2 loop can replicate frames and exhaust switch forwarding capacity.

C:

A retail branch temporarily adds a redundant cable without a loop-control design and network-wide MAC flapping begins. An outdated IPv4 neighbor entry can direct frames to a MAC that no longer owns the destination IP, whereas an uncontrolled Layer 2 loop can replicate frames and exhaust switch forwarding capacity. Inspect and refresh learned ARP state while verifying valid gratuitous ARP or supported failover signaling.

D:

Hosts cannot route outside their local subnet when addressing and gateway placement are inconsistent, while an uncontrolled Layer 2 loop can replicate frames and exhaust switch forwarding capacity.

Question 559

A customer proof-of-concept scenario describes: An industrial customer receives a design proposal promising seamless failover but no test plan or pass criteria. Which governance or validation step should be repeated after future changes?

  1. Include shared-risk analysis in every multi-site resilience proposal.
  2. Revalidate lifecycle assumptions and renewal obligations before commercial approval.
  3. Attach a measurable acceptance plan to every presales architecture approval.
  4. Review service-level objectives at design, acceptance and major change milestones.

Explanation

Correct Answer

C:

A proposal lacking objective acceptance evidence cannot demonstrate that promised functions work in context. Define observable test cases for critical workloads, failure paths, policy enforcement and managed rollout. A signed test matrix records input conditions, expected outcomes, actual results and accepted exceptions. An industrial customer receives a design proposal promising seamless failover but no test plan or pass criteria.

Incorrect Answers

A:

Component duplication alone does not eliminate common physical and provider failure domains, whereas a proposal lacking objective acceptance evidence cannot demonstrate that promised functions work in context.

B:

An industrial customer receives a design proposal promising seamless failover but no test plan or pass criteria. Initial acquisition price alone cannot represent a network solution's long-term total cost, while a proposal lacking objective acceptance evidence cannot demonstrate that promised functions work in context.

D:

An industrial customer receives a design proposal promising seamless failover but no test plan or pass criteria. Unmeasurable service promises cannot guide topology choice or objective acceptance testing, but a proposal lacking objective acceptance evidence cannot demonstrate that promised functions work in context. Review service-level objectives at design, acceptance and major change milestones.

Question 560

A hypothetical customer planning meeting reports: A medical campus allows weak certificate validation for corporate Wi-Fi and a client joins an untrusted impostor network. Which durable operating practice most directly reduces recurrence?

  1. Update WLAN density models after event or device population changes.
  2. Repeat coverage surveys when partitions, shelves or room usage change.
  3. Run representative roaming traces after AP and controller software changes.
  4. Audit WLAN identity and certificate policies during onboarding and offboarding.

Explanation

Correct Answer

D:

Enterprise WLAN trust requires individual identity validation and appropriately authenticated network infrastructure. Deploy supported 802.1X or certificate-based WLAN admission with correct server certificate checks. Authorized users connect through verified infrastructure and revoked credentials lose access without global key changes. A medical campus allows weak certificate validation for corporate Wi-Fi and a client joins an untrusted impostor network.

Incorrect Answers

A:

High client density and airtime contention can limit per-user throughput even when received signal is strong, while enterprise WLAN trust requires individual identity validation and appropriately authenticated network infrastructure.

B:

AP counts alone cannot predict indoor RF coverage without building material and placement assessment, but enterprise WLAN trust requires individual identity validation and appropriately authenticated network infrastructure.

C:

Roaming requires suitable RF overlap, client support and compatible authentication or mobility settings, whereas enterprise WLAN trust requires individual identity validation and appropriately authenticated network infrastructure.

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU (H19-301) Practice Tests