Cisco 200-301 Bundle

Neither step is the requested pair: Avoid BPDU filter on unmanaged switch-to-switch links is for explain why indiscriminate BPDU filtering risks a bridging loop, and Treat CDP and LLDP neighbors as directly connected Layer 2 evidence is for differentiate topology discovery from actual routing reachability. Suppressing BPDUs can hide redundant links from spanning-tree loop prevention. The proposed plan misses the two stated outcomes.

The first step covers (1), but the second addresses understand Rapid PVST+ alternate-port behavior. An alternate port provides a backup path that does not forward user frames during normal loop-free operation. It leaves outcome (2) unfulfilled.

The second step covers (2), but the first addresses diagnose why a new AP cannot join its WLC despite an active Ethernet port. Layer 1 link up alone does not establish controller discovery and join reachability. It leaves outcome (1) unfulfilled.

That ACE uses a wildcard with a different number of ignored address bits, so its source range does not equal the required subnet.

That explanation does not distinguish this option. “access-list 110 permit ip 10.48.14.0 255.255.255.0 any” is an alternative action, but it does not by itself establish the outcome required in this case.

That explanation does not distinguish this option. “access-list 110 permit ip 10.48.14.0 0.0.0.127 any” is an alternative action, but it does not by itself establish the outcome required in this case.

The second step covers (2), but the first addresses select three nonoverlapping 20-MHz 2.4-GHz Wi-Fi channels in a common regulatory domain. These nominal 20-MHz channel centers reduce adjacent-channel overlap in 2.4 GHz. It leaves outcome (1) unfulfilled.

The first step covers (1), but the second addresses explain why a strong received signal can still produce poor WLAN throughput. RF quality and contention affect effective throughput beyond signal strength alone. It leaves outcome (2) unfulfilled.

Neither step is the requested pair: Use show mac address-table to inspect learned entries is for find a host's VLAN and learned switchport from its MAC address, and Classify 192.168/16 as private IPv4 space is for recognize an RFC1918 address in 192.168.0.0/16. The MAC table lists forwarding entries indexed by destination MAC and VLAN. The proposed plan misses the two stated outcomes.

The second step covers (2), but the first addresses understand why a Terraform state file needs secure handling. State can contain infrastructure identifiers and sensitive attributes used to track managed resources. It leaves outcome (1) unfulfilled.

Neither step is the requested pair: Recognize HTTP 401 Unauthorized and inspect credentials is for identify a REST response indicating the caller lacks valid authentication, and Compare collected device state against desired-state definitions is for detect configuration drift across a fleet after a planned rollout. 401 commonly indicates absent/invalid authentication, while 403 often signals insufficient authorization. The proposed plan misses the two stated outcomes.

The first step covers (1), but the second addresses distinguish a trained predictive model from fixed threshold alerting. ML models fit patterns from data, while simple thresholds use explicit static comparison rules. It leaves outcome (2) unfulfilled.

That route also matches but its prefix length is shorter than /30; a more-specific matching prefix wins.

That explanation does not distinguish this option. “10.90.0.0/16 via 192.0.2.2” is an alternative action, but it does not by itself establish the outcome required in this case.

That explanation does not distinguish this option. “10.90.114.0/24 via 192.0.2.3” is an alternative action, but it does not by itself establish the outcome required in this case.

The first step covers (1), but the second addresses support a remote site that cannot always reach the controller. FlexConnect supports selected local switching and local survivability behavior in branch deployments. It leaves outcome (2) unfulfilled.

The second step covers (2), but the first addresses separate finance endpoints from engineering devices at Layer 2. VLAN membership creates separate Layer 2 broadcast domains even on the same physical switch. It leaves outcome (1) unfulfilled.

Neither step is the requested pair: Inspect show cdp neighbors detail on an enabled link is for discover a neighboring Cisco switch's device name and management address, and Configure matching channel-group IDs with mode active on the intended member ports is for bundle two compatible physical Ethernet switchports into one logical LACP link. CDP exchanges Cisco neighbor information at Layer 2, including platform and management identifiers. The proposed plan misses the two stated outcomes.

That corresponds to /29, with three host bits.

That corresponds to /27, with five host bits.

That corresponds to /24, covering a much larger address block.

The access layer connects endpoints while the collapsed core aggregates access and provides routing. That is not sufficient here: A repeater repeats bits across hosts, so overlapping transmissions contend for the same medium.

A next-generation firewall can classify application traffic and track sessions before permitting flows. That is not sufficient here: A repeater repeats bits across hosts, so overlapping transmissions contend for the same medium.

IPv6 multicast addresses identify groups, unlike a broadcast address. That is not sufficient here: A repeater repeats bits across hosts, so overlapping transmissions contend for the same medium.

Without a final permit, the implicit deny blocks traffic not otherwise matched. That is not sufficient here: User education helps people identify suspicious login requests and social-engineering cues.

An extended ACL can distinguish HTTPS TCP traffic from other server ports. That is not sufficient here: User education helps people identify suspicious login requests and social-engineering cues.

WPA introduced improvements over WEP but its TKIP design is weaker than modern WPA2/WPA3. That is not sufficient here: User education helps people identify suspicious login requests and social-engineering cues.

An open replacement breaks the approved security requirement and leaves the disabled corporate WLAN unresolved.

The documented issue is the WLAN disabled state, not a wired native-VLAN mismatch.

Authentication settings do not require removal to correct an administratively disabled WLAN.

Neither step is the requested pair: Allow equal-cost multipath when the platform and configuration permit it is for retain two equal-cost eligible OSPF routes for one prefix, and Give the backup static route AD higher than OSPF's 110 is for provide a static backup only if an OSPF route to the same prefix disappears. ECMP can install several equally preferred next hops to the same exact prefix. The proposed plan misses the two stated outcomes.

The first step covers (1), but the second addresses identify which router becomes the OSPF DR among two equal-priority routers. Higher router ID wins the DR election priority tie when both are otherwise eligible. It leaves outcome (2) unfulfilled.

The second step covers (2), but the first addresses find the next-hop IP for a learned destination prefix. The routing-table next hop identifies the neighbor to which packets should be forwarded. It leaves outcome (1) unfulfilled.