McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 53

Question 520

At fictional Dovetail University, a network engineer supporting campus routing is reviewing OSPF area design and link-state convergence during a customer network audit (HCIP-H12-821-OSPF-130). The observed network issue is: An engineer mistakes an OSPF external Type 2 metric for a path whose internal costs are always added to its advertised value. Which ongoing preventive or detective control would best reduce recurrence?

  1. Record configured effective costs during WAN circuit upgrades.
  2. Validate each constituent prefix and failover behavior under a planned aggregate.
  3. Compare redistributed prefix lists and Type 5 presence in each permitted area.
  4. State E1 or E2 design intent in redistribution policies and validate dual exits.

Explanation

Correct Answer

D:

The preventive or detective safeguard is: State E1 or E2 design intent in redistribution policies and validate dual exits. This directly addresses the recurring fault: An engineer mistakes an OSPF external Type 2 metric for a path whose internal costs are always added to its advertised value. The corrective action would be: Compare E1 versus E2 metric handling and evaluate route selection under competing exits. Success is demonstrated when: Competing ASBR paths select according to the defined external metric type and tie-breaking cost.

Incorrect Answers

A:

“Record configured effective costs during WAN circuit upgrades” addresses recurrence of another problem: A failover design sets interface bandwidth but ignores manually configured OSPF costs that override the intended metric. That problem depends on: The preventive or detective safeguard is: Record configured effective costs during WAN circuit upgrades. The recurring risk here is: An engineer mistakes an OSPF external Type 2 metric for a path whose internal costs are always added to its advertised value. The more targeted safeguard is “State E1 or E2 design intent in redistribution policies and validate dual exits” because the preventive or detective safeguard is: State E1 or E2 design intent in redistribution policies and validate dual exits.

B:

“Validate each constituent prefix and failover behavior under a planned aggregate” addresses recurrence of another problem: An OSPF summary aggregate covers a disconnected subnet and an engineer assumes all summarized addresses have valid next hops. That problem depends on: The preventive or detective safeguard is: Validate each constituent prefix and failover behavior under a planned aggregate. The recurring risk here is: An engineer mistakes an OSPF external Type 2 metric for a path whose internal costs are always added to its advertised value. The more targeted safeguard is “State E1 or E2 design intent in redistribution policies and validate dual exits” because the preventive or detective safeguard is: State E1 or E2 design intent in redistribution policies and validate dual exits.

C:

“Compare redistributed prefix lists and Type 5 presence in each permitted area” addresses recurrence of another problem: An ASBR redistributes a static service subnet but other areas never see its external OSPF destination. That problem depends on: The preventive or detective safeguard is: Compare redistributed prefix lists and Type 5 presence in each permitted area. The recurring risk here is: An engineer mistakes an OSPF external Type 2 metric for a path whose internal costs are always added to its advertised value. The more targeted safeguard is “State E1 or E2 design intent in redistribution policies and validate dual exits” because the preventive or detective safeguard is: State E1 or E2 design intent in redistribution policies and validate dual exits.

Question 521

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing route-policy and traffic-control behavior during a network troubleshooting drill (HCIP-H12-821-POLICY-131). The observed network issue is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. Which ongoing preventive or detective control would best reduce recurrence?

  1. Review external route inventory after every redistribution expansion.
  2. Verify CIR and CBS settings under steady and burst traffic tests.
  3. Load-test all QoS queues and starvation behavior before enabling strict priority.
  4. Test route-policy node hit outcomes using explicit positive and negative prefixes.

Explanation

Correct Answer

A:

The preventive or detective safeguard is: Review external route inventory after every redistribution expansion. This directly addresses the recurring fault: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. The corrective action would be: Apply a scoped redistribution route policy and permit only selected service networks. Success is demonstrated when: OSPF external LSAs exclude the management subnet and include permitted service destinations.

Incorrect Answers

B:

“Verify CIR and CBS settings under steady and burst traffic tests” addresses recurrence of another problem: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. That problem depends on: The preventive or detective safeguard is: Verify CIR and CBS settings under steady and burst traffic tests. The recurring risk here is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. The more targeted safeguard is “Review external route inventory after every redistribution expansion” because the preventive or detective safeguard is: Review external route inventory after every redistribution expansion.

C:

“Load-test all QoS queues and starvation behavior before enabling strict priority” addresses recurrence of another problem: A campus egress port uses weighted scheduling but latency-sensitive voice sits behind large bulk transfers. That problem depends on: The preventive or detective safeguard is: Load-test all QoS queues and starvation behavior before enabling strict priority. The recurring risk here is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. The more targeted safeguard is “Review external route inventory after every redistribution expansion” because the preventive or detective safeguard is: Review external route inventory after every redistribution expansion.

D:

“Test route-policy node hit outcomes using explicit positive and negative prefixes” addresses recurrence of another problem: A Huawei route-policy matches a prefix but the engineer expects every route passing the first node to continue through later nodes. That problem depends on: The preventive or detective safeguard is: Test route-policy node hit outcomes using explicit positive and negative prefixes. The recurring risk here is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. The more targeted safeguard is “Review external route inventory after every redistribution expansion” because the preventive or detective safeguard is: Review external route inventory after every redistribution expansion.

Question 522

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing route-policy and traffic-control behavior during a network troubleshooting drill (HCIP-H12-821-POLICY-131). The observed network issue is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. Which observation most directly verifies that the corrective change succeeded?

  1. Packets retain intended service classification through each trusted hop.
  2. Denied test flows increment the expected counters and permitted traffic still passes.
  3. Upstream observed updates carry permitted communities and service-specific actions occur.
  4. OSPF external LSAs exclude the management subnet and include permitted service destinations.

Explanation

Correct Answer

D:

The best verification observation is: OSPF external LSAs exclude the management subnet and include permitted service destinations. It demonstrates the corrective action: Apply a scoped redistribution route policy and permit only selected service networks. This fits the principle: Route redistribution crosses protocol boundaries and needs controlled prefix filtering. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Packets retain intended service classification through each trusted hop” responds to another technical or business failure: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. That source case depends on: The best verification observation is: Packets retain intended service classification through each trusted hop. The present issue is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. The more direct action is “OSPF external LSAs exclude the management subnet and include permitted service destinations” because the best verification observation is: OSPF external LSAs exclude the management subnet and include permitted service destinations.

B:

“Denied test flows increment the expected counters and permitted traffic still passes” responds to another technical or business failure: An administrator applies an ACL to an ingress interface in the wrong direction and a blocked flow still reaches servers. That source case depends on: The best verification observation is: Denied test flows increment the expected counters and permitted traffic still passes. The present issue is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. The more direct action is “OSPF external LSAs exclude the management subnet and include permitted service destinations” because the best verification observation is: OSPF external LSAs exclude the management subnet and include permitted service destinations.

C:

“Upstream observed updates carry permitted communities and service-specific actions occur” responds to another technical or business failure: An outbound route-policy appends a community but the upstream device removes communities when send behavior is disabled. That source case depends on: The best verification observation is: Upstream observed updates carry permitted communities and service-specific actions occur. The present issue is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. The more direct action is “OSPF external LSAs exclude the management subnet and include permitted service destinations” because the best verification observation is: OSPF external LSAs exclude the management subnet and include permitted service destinations.

Question 523

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing route-policy and traffic-control behavior during a network troubleshooting drill (HCIP-H12-821-POLICY-131). The observed network issue is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. Which next engineering action best addresses the reported problem?

  1. Apply a scoped redistribution route policy and permit only selected service networks.
  2. Generate probes from each intended source address or VLAN and observe policy match statistics.
  3. Correct the prefix-filter network and mask length parameters for intended component routes.
  4. Mark redistributed routes and block re-import at reciprocal protocol boundaries.

Explanation

Correct Answer

A:

The directly responsive action is: Apply a scoped redistribution route policy and permit only selected service networks. The specific reported fault is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. Confirmation should show: OSPF external LSAs exclude the management subnet and include permitted service destinations. The supporting technical principle is: Route redistribution crosses protocol boundaries and needs controlled prefix filtering.

Incorrect Answers

B:

“Generate probes from each intended source address or VLAN and observe policy match statistics” responds to another technical or business failure: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. That source case depends on: Source-sensitive forwarding policy cannot be verified using only destination-based generic probes. The present issue is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. The more direct action is “Apply a scoped redistribution route policy and permit only selected service networks” because Route redistribution crosses protocol boundaries and needs controlled prefix filtering.

C:

“Correct the prefix-filter network and mask length parameters for intended component routes” responds to another technical or business failure: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. That source case depends on: IP prefix filtering depends on both address prefix and permitted length ranges. The present issue is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. The more direct action is “Apply a scoped redistribution route policy and permit only selected service networks” because Route redistribution crosses protocol boundaries and needs controlled prefix filtering.

D:

“Mark redistributed routes and block re-import at reciprocal protocol boundaries” responds to another technical or business failure: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. That source case depends on: Bidirectional route redistribution requires loop prevention and consistent route ownership. The present issue is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. The more direct action is “Apply a scoped redistribution route policy and permit only selected service networks” because Route redistribution crosses protocol boundaries and needs controlled prefix filtering.

Question 524

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing route-policy and traffic-control behavior during a network troubleshooting drill (HCIP-H12-821-POLICY-131). The observed network issue is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. Which routing, switching, or network principle best explains the appropriate solution?

  1. Route redistribution crosses protocol boundaries and needs controlled prefix filtering.
  2. Route attribute creation alone does not guarantee propagation across a BGP session.
  3. Egress congestion scheduling determines queuing delay among traffic classes.
  4. End-to-end QoS depends on consistent marking trust and scheduling policy.

Explanation

Correct Answer

A:

The governing principle is: Route redistribution crosses protocol boundaries and needs controlled prefix filtering. In this scenario, the appropriate action is: Apply a scoped redistribution route policy and permit only selected service networks. Valid evidence would show: OSPF external LSAs exclude the management subnet and include permitted service destinations.

Incorrect Answers

B:

“Route attribute creation alone does not guarantee propagation across a BGP session” responds to another technical or business failure: An outbound route-policy appends a community but the upstream device removes communities when send behavior is disabled. That source case depends on: Route attribute creation alone does not guarantee propagation across a BGP session. The present issue is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. The more direct action is “Route redistribution crosses protocol boundaries and needs controlled prefix filtering” because Route redistribution crosses protocol boundaries and needs controlled prefix filtering.

C:

“Egress congestion scheduling determines queuing delay among traffic classes” responds to another technical or business failure: A campus egress port uses weighted scheduling but latency-sensitive voice sits behind large bulk transfers. That source case depends on: Egress congestion scheduling determines queuing delay among traffic classes. The present issue is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. The more direct action is “Route redistribution crosses protocol boundaries and needs controlled prefix filtering” because Route redistribution crosses protocol boundaries and needs controlled prefix filtering.

D:

“End-to-end QoS depends on consistent marking trust and scheduling policy” responds to another technical or business failure: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. That source case depends on: End-to-end QoS depends on consistent marking trust and scheduling policy. The present issue is: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. The more direct action is “Route redistribution crosses protocol boundaries and needs controlled prefix filtering” because Route redistribution crosses protocol boundaries and needs controlled prefix filtering.

Question 525

At fictional Riverstone Travel, a network engineer supporting booking offices is reviewing OSPF area design and link-state convergence during a post-maintenance incident review (HCIP-H12-821-OSPF-132). The observed network issue is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. Which observation most directly verifies that the corrective change succeeded?

  1. The backbone receives the intended external aggregate and required exceptions.
  2. The area border router maintains backbone reachability and remote area routes appear.
  3. Link-state updates and SPF events settle after the failing interface is stabilized.
  4. The neighbor remains stable beyond multiple Dead intervals under normal traffic.

Explanation

Correct Answer

C:

The best verification observation is: Link-state updates and SPF events settle after the failing interface is stabilized. It demonstrates the corrective action: Locate the unstable interface and review SPF scheduling while repairing the physical source of churn. This fits the principle: Repeated link-state topology changes cause repeated shortest-path recomputation. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“The backbone receives the intended external aggregate and required exceptions” responds to another technical or business failure: An ASBR advertising multiple external subnets floods excessive details because external route aggregation was never applied. That source case depends on: The best verification observation is: The backbone receives the intended external aggregate and required exceptions. The present issue is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. The more direct action is “Link-state updates and SPF events settle after the failing interface is stabilized” because the best verification observation is: Link-state updates and SPF events settle after the failing interface is stabilized.

B:

“The area border router maintains backbone reachability and remote area routes appear” responds to another technical or business failure: A branch area has no direct backbone connectivity and operators try to exchange routes between nonbackbone areas directly. That source case depends on: The best verification observation is: The area border router maintains backbone reachability and remote area routes appear. The present issue is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. The more direct action is “Link-state updates and SPF events settle after the failing interface is stabilized” because the best verification observation is: Link-state updates and SPF events settle after the failing interface is stabilized.

D:

“The neighbor remains stable beyond multiple Dead intervals under normal traffic” responds to another technical or business failure: Routers have the same network prefix but one side uses a different OSPF Hello interval on an Ethernet segment. That source case depends on: The best verification observation is: The neighbor remains stable beyond multiple Dead intervals under normal traffic. The present issue is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. The more direct action is “Link-state updates and SPF events settle after the failing interface is stabilized” because the best verification observation is: Link-state updates and SPF events settle after the failing interface is stabilized.

Question 526

At fictional Riverstone Travel, a network engineer supporting booking offices is reviewing OSPF area design and link-state convergence during a post-maintenance incident review (HCIP-H12-821-OSPF-132). The observed network issue is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. Which next engineering action best addresses the reported problem?

  1. Locate the unstable interface and review SPF scheduling while repairing the physical source of churn.
  2. Restore an appropriate area 0 connection or review a supported planned virtual-link design.
  3. Investigate bidirectional Hello reception and permitted multicast or interface filtering on the segment.
  4. Distinguish local routing-table filtering from permitted link-state database flooding and redesign at an appropriate boundary.

Explanation

Correct Answer

A:

The directly responsive action is: Locate the unstable interface and review SPF scheduling while repairing the physical source of churn. The specific reported fault is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. Confirmation should show: Link-state updates and SPF events settle after the failing interface is stabilized. The supporting technical principle is: Repeated link-state topology changes cause repeated shortest-path recomputation.

Incorrect Answers

B:

“Restore an appropriate area 0 connection or review a supported planned virtual-link design” responds to another technical or business failure: A branch area has no direct backbone connectivity and operators try to exchange routes between nonbackbone areas directly. That source case depends on: OSPF inter-area routing depends on a contiguous logical backbone architecture. The present issue is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. The more direct action is “Locate the unstable interface and review SPF scheduling while repairing the physical source of churn” because Repeated link-state topology changes cause repeated shortest-path recomputation.

C:

“Investigate bidirectional Hello reception and permitted multicast or interface filtering on the segment” responds to another technical or business failure: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. That source case depends on: OSPF two-way communication is established only after reciprocal Hello discovery. The present issue is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. The more direct action is “Locate the unstable interface and review SPF scheduling while repairing the physical source of churn” because Repeated link-state topology changes cause repeated shortest-path recomputation.

D:

“Distinguish local routing-table filtering from permitted link-state database flooding and redesign at an appropriate boundary” responds to another technical or business failure: An engineer uses a prefix-filter on one OSPF router expecting to prevent every other router from receiving the LSA. That source case depends on: OSPF route installation filtering is not necessarily equivalent to suppressing flooded LSAs. The present issue is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. The more direct action is “Locate the unstable interface and review SPF scheduling while repairing the physical source of churn” because Repeated link-state topology changes cause repeated shortest-path recomputation.

Question 527

At fictional Riverstone Travel, a network engineer supporting booking offices is reviewing OSPF area design and link-state convergence during a post-maintenance incident review (HCIP-H12-821-OSPF-132). The observed network issue is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. Which ongoing preventive or detective control would best reduce recurrence?

  1. Validate Type 7 generation and ABR translation during branch redistribution testing.
  2. Test default availability and external-LSA suppression when converting areas.
  3. Test cost changes with an explicit before-and-after route and path table.
  4. Trend OSPF adjacency and SPF event rates alongside interface health.

Explanation

Correct Answer

D:

The preventive or detective safeguard is: Trend OSPF adjacency and SPF event rates alongside interface health. This directly addresses the recurring fault: A router repeatedly runs SPF after frequent interface state changes and application latency rises. The corrective action would be: Locate the unstable interface and review SPF scheduling while repairing the physical source of churn. Success is demonstrated when: Link-state updates and SPF events settle after the failing interface is stabilized.

Incorrect Answers

A:

“Validate Type 7 generation and ABR translation during branch redistribution testing” addresses recurrence of another problem: An NSSA branch redistributes a local service prefix but the backbone never receives the route. That problem depends on: The preventive or detective safeguard is: Validate Type 7 generation and ABR translation during branch redistribution testing. The recurring risk here is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. The more targeted safeguard is “Trend OSPF adjacency and SPF event rates alongside interface health” because the preventive or detective safeguard is: Trend OSPF adjacency and SPF event rates alongside interface health.

B:

“Test default availability and external-LSA suppression when converting areas” addresses recurrence of another problem: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. That problem depends on: The preventive or detective safeguard is: Test default availability and external-LSA suppression when converting areas. The recurring risk here is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. The more targeted safeguard is “Trend OSPF adjacency and SPF event rates alongside interface health” because the preventive or detective safeguard is: Trend OSPF adjacency and SPF event rates alongside interface health.

C:

“Test cost changes with an explicit before-and-after route and path table” addresses recurrence of another problem: An operator raises OSPF interface cost expecting every transit path to become more attractive. That problem depends on: The preventive or detective safeguard is: Test cost changes with an explicit before-and-after route and path table. The recurring risk here is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. The more targeted safeguard is “Trend OSPF adjacency and SPF event rates alongside interface health” because the preventive or detective safeguard is: Trend OSPF adjacency and SPF event rates alongside interface health.

Question 528

At fictional Riverstone Travel, a network engineer supporting booking offices is reviewing OSPF area design and link-state convergence during a post-maintenance incident review (HCIP-H12-821-OSPF-132). The observed network issue is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. Which routing, switching, or network principle best explains the appropriate solution?

  1. OSPF neighbor liveness requires compatible timer parameters on the shared network.
  2. Repeated link-state topology changes cause repeated shortest-path recomputation.
  3. Totally stubby area behavior reduces inter-area summary visibility beyond ordinary stub restrictions.
  4. OSPF external routing requires correctly originated and flooded AS-external LSAs.

Explanation

Correct Answer

B:

The governing principle is: Repeated link-state topology changes cause repeated shortest-path recomputation. In this scenario, the appropriate action is: Locate the unstable interface and review SPF scheduling while repairing the physical source of churn. Valid evidence would show: Link-state updates and SPF events settle after the failing interface is stabilized.

Incorrect Answers

A:

“OSPF neighbor liveness requires compatible timer parameters on the shared network” responds to another technical or business failure: Routers have the same network prefix but one side uses a different OSPF Hello interval on an Ethernet segment. That source case depends on: OSPF neighbor liveness requires compatible timer parameters on the shared network. The present issue is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. The more direct action is “Repeated link-state topology changes cause repeated shortest-path recomputation” because Repeated link-state topology changes cause repeated shortest-path recomputation.

C:

“Totally stubby area behavior reduces inter-area summary visibility beyond ordinary stub restrictions” responds to another technical or business failure: An OSPF totally stubby area receives unwanted detailed inter-area routes after only one router's configuration changes. That source case depends on: Totally stubby area behavior reduces inter-area summary visibility beyond ordinary stub restrictions. The present issue is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. The more direct action is “Repeated link-state topology changes cause repeated shortest-path recomputation” because Repeated link-state topology changes cause repeated shortest-path recomputation.

D:

“OSPF external routing requires correctly originated and flooded AS-external LSAs” responds to another technical or business failure: An ASBR redistributes a static service subnet but other areas never see its external OSPF destination. That source case depends on: OSPF external routing requires correctly originated and flooded AS-external LSAs. The present issue is: A router repeatedly runs SPF after frequent interface state changes and application latency rises. The more direct action is “Repeated link-state topology changes cause repeated shortest-path recomputation” because Repeated link-state topology changes cause repeated shortest-path recomputation.

Question 529

At fictional Keystone Hospitality, a network engineer supporting guest services is reviewing BGP routing, path attributes and EVPN exchange during an initial deployment test (HCIP-H12-821-BGP-133). The observed network issue is: An iBGP adjacency to peer loopbacks fails because one side sends TCP from the physical interface address. Which next engineering action best addresses the reported problem?

  1. Investigate the accidental AS path and repair policy instead of weakening protection.
  2. Establish reachability to the advertised next hop or apply supported next-hop-local policy where appropriate.
  3. Configure a consistent loopback update source and verify bidirectional route to peer addresses.
  4. Match BGP remote-as values with the intended eBGP or iBGP relationship and check session logs.

Explanation

Correct Answer

C:

The directly responsive action is: Configure a consistent loopback update source and verify bidirectional route to peer addresses. The specific reported fault is: An iBGP adjacency to peer loopbacks fails because one side sends TCP from the physical interface address. Confirmation should show: Both routers reach Established using the planned loopback source and destination. The supporting technical principle is: BGP TCP endpoints must match peer configuration and be routable in both directions.

Incorrect Answers

A:

“Investigate the accidental AS path and repair policy instead of weakening protection” responds to another technical or business failure: An eBGP peer accepts a route with its own AS already in AS_PATH and an engineer proposes disabling loop avoidance broadly. That source case depends on: BGP AS_PATH includes information used for inter-AS loop prevention. The present issue is: An iBGP adjacency to peer loopbacks fails because one side sends TCP from the physical interface address. The more direct action is “Configure a consistent loopback update source and verify bidirectional route to peer addresses” because BGP TCP endpoints must match peer configuration and be routable in both directions.

B:

“Establish reachability to the advertised next hop or apply supported next-hop-local policy where appropriate” responds to another technical or business failure: A received BGP prefix has a NEXT_HOP attribute unreachable inside the receiving autonomous system. That source case depends on: BGP route viability depends on recursive reachability of the next-hop attribute. The present issue is: An iBGP adjacency to peer loopbacks fails because one side sends TCP from the physical interface address. The more direct action is “Configure a consistent loopback update source and verify bidirectional route to peer addresses” because BGP TCP endpoints must match peer configuration and be routable in both directions.

D:

“Match BGP remote-as values with the intended eBGP or iBGP relationship and check session logs” responds to another technical or business failure: Two routers establish TCP connectivity but BGP stays in Active because the configured peer AS differs from the neighbor's actual AS. That source case depends on: BGP peering requires agreement about autonomous-system identity and session roles. The present issue is: An iBGP adjacency to peer loopbacks fails because one side sends TCP from the physical interface address. The more direct action is “Configure a consistent loopback update source and verify bidirectional route to peer addresses” because BGP TCP endpoints must match peer configuration and be routable in both directions.

Question 530

At fictional Keystone Hospitality, a network engineer supporting guest services is reviewing BGP routing, path attributes and EVPN exchange during an initial deployment test (HCIP-H12-821-BGP-133). The observed network issue is: An iBGP adjacency to peer loopbacks fails because one side sends TCP from the physical interface address. Which routing, switching, or network principle best explains the appropriate solution?

  1. BGP TCP endpoints must match peer configuration and be routable in both directions.
  2. EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination.
  3. BGP FSM states distinguish session formation failures from routing-update processing.
  4. EVPN Type 2 routes distribute endpoint MAC reachability and related IP bindings.

Explanation

Correct Answer

A:

The governing principle is: BGP TCP endpoints must match peer configuration and be routable in both directions. In this scenario, the appropriate action is: Configure a consistent loopback update source and verify bidirectional route to peer addresses. Valid evidence would show: Both routers reach Established using the planned loopback source and destination.

Incorrect Answers

B:

“EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination” responds to another technical or business failure: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. That source case depends on: EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination. The present issue is: An iBGP adjacency to peer loopbacks fails because one side sends TCP from the physical interface address. The more direct action is “BGP TCP endpoints must match peer configuration and be routable in both directions” because BGP TCP endpoints must match peer configuration and be routable in both directions.

C:

“BGP FSM states distinguish session formation failures from routing-update processing” responds to another technical or business failure: BGP stays in Idle after a new neighbor is configured and operators troubleshoot route policies instead of local interface reachability. That source case depends on: BGP FSM states distinguish session formation failures from routing-update processing. The present issue is: An iBGP adjacency to peer loopbacks fails because one side sends TCP from the physical interface address. The more direct action is “BGP TCP endpoints must match peer configuration and be routable in both directions” because BGP TCP endpoints must match peer configuration and be routable in both directions.

D:

“EVPN Type 2 routes distribute endpoint MAC reachability and related IP bindings” responds to another technical or business failure: A VXLAN VTEP fails to learn a remote host's MAC and IP even though underlay IP reachability is working. That source case depends on: EVPN Type 2 routes distribute endpoint MAC reachability and related IP bindings. The present issue is: An iBGP adjacency to peer loopbacks fails because one side sends TCP from the physical interface address. The more direct action is “BGP TCP endpoints must match peer configuration and be routable in both directions” because BGP TCP endpoints must match peer configuration and be routable in both directions.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests