McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 51

Question 500

At fictional Cedar Retail, a network engineer supporting store connectivity is reviewing BGP routing, path attributes and EVPN exchange during a baseline compliance test (HCIP-H12-821-BGP-125). The observed network issue is: A company prepends its AS several times to influence inbound traffic but sees no change at a remote network. Which ongoing preventive or detective control would best reduce recurrence?

  1. Inspect IMET routes whenever BUM replication members are incomplete.
  2. Use external looking-glass evidence before claiming inbound traffic-engineering success.
  3. Review RD uniqueness and RT membership separately during EVPN onboarding.
  4. Validate both reflected path visibility and next-hop recursion on clients.

Explanation

Correct Answer

B:

The preventive or detective safeguard is: Use external looking-glass evidence before claiming inbound traffic-engineering success. This directly addresses the recurring fault: A company prepends its AS several times to influence inbound traffic but sees no change at a remote network. The corrective action would be: Verify upstream policies, route visibility and whether competing paths are evaluated differently. Success is demonstrated when: External observed routes show the intended prepending while any remaining policy preference is explained.

Incorrect Answers

A:

“Inspect IMET routes whenever BUM replication members are incomplete” addresses recurrence of another problem: A leaf does not learn remote VXLAN flood-list membership because its EVPN Type 3 route is missing. That problem depends on: The preventive or detective safeguard is: Inspect IMET routes whenever BUM replication members are incomplete. The recurring risk here is: A company prepends its AS several times to influence inbound traffic but sees no change at a remote network. The more targeted safeguard is “Use external looking-glass evidence before claiming inbound traffic-engineering success” because the preventive or detective safeguard is: Use external looking-glass evidence before claiming inbound traffic-engineering success.

C:

“Review RD uniqueness and RT membership separately during EVPN onboarding” addresses recurrence of another problem: A network architect uses an EVPN route distinguisher expecting it to automatically control which VPNs import the route. That problem depends on: The preventive or detective safeguard is: Review RD uniqueness and RT membership separately during EVPN onboarding. The recurring risk here is: A company prepends its AS several times to influence inbound traffic but sees no change at a remote network. The more targeted safeguard is “Use external looking-glass evidence before claiming inbound traffic-engineering success” because the preventive or detective safeguard is: Use external looking-glass evidence before claiming inbound traffic-engineering success.

D:

“Validate both reflected path visibility and next-hop recursion on clients” addresses recurrence of another problem: A route reflector receives a new external prefix but its clients cannot use the route because the advertised next hop is unreachable. That problem depends on: The preventive or detective safeguard is: Validate both reflected path visibility and next-hop recursion on clients. The recurring risk here is: A company prepends its AS several times to influence inbound traffic but sees no change at a remote network. The more targeted safeguard is “Use external looking-glass evidence before claiming inbound traffic-engineering success” because the preventive or detective safeguard is: Use external looking-glass evidence before claiming inbound traffic-engineering success.

Question 501

At fictional Oakridge Energy, a network engineer supporting field substations is reviewing route-policy and traffic-control behavior during a production cutover (HCIP-H12-821-POLICY-126). The observed network issue is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. Which observation most directly verifies that the corrective change succeeded?

  1. Voice packets hit the intended class and maintain lower delay during controlled congestion.
  2. Measured loss and rate follow the intended policing or shaping design under overload.
  3. Packets retain intended service classification through each trusted hop.
  4. Controlled traffic shows desired throughput and measured color actions without unexpected loss.

Explanation

Correct Answer

C:

The best verification observation is: Packets retain intended service classification through each trusted hop. It demonstrates the corrective action: Audit trust boundaries and re-marking configuration across the complete forwarding path. This fits the principle: End-to-end QoS depends on consistent marking trust and scheduling policy. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Voice packets hit the intended class and maintain lower delay during controlled congestion” responds to another technical or business failure: A classifier matches the wrong VLAN priority bits and high-priority voice is treated as bulk data. That source case depends on: The best verification observation is: Voice packets hit the intended class and maintain lower delay during controlled congestion. The present issue is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. The more direct action is “Packets retain intended service classification through each trusted hop” because the best verification observation is: Packets retain intended service classification through each trusted hop.

B:

“Measured loss and rate follow the intended policing or shaping design under overload” responds to another technical or business failure: A Huawei MQC behavior applies policing at an uplink but the operator expects it to buffer all excess traffic. That source case depends on: The best verification observation is: Measured loss and rate follow the intended policing or shaping design under overload. The present issue is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. The more direct action is “Packets retain intended service classification through each trusted hop” because the best verification observation is: Packets retain intended service classification through each trusted hop.

D:

“Controlled traffic shows desired throughput and measured color actions without unexpected loss” responds to another technical or business failure: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. That source case depends on: The best verification observation is: Controlled traffic shows desired throughput and measured color actions without unexpected loss. The present issue is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. The more direct action is “Packets retain intended service classification through each trusted hop” because the best verification observation is: Packets retain intended service classification through each trusted hop.

Question 502

At fictional Oakridge Energy, a network engineer supporting field substations is reviewing route-policy and traffic-control behavior during a production cutover (HCIP-H12-821-POLICY-126). The observed network issue is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. Which next engineering action best addresses the reported problem?

  1. Narrow route-policy scope to the intended neighbor, protocol and prefix sets.
  2. Correct the prefix-filter network and mask length parameters for intended component routes.
  3. Apply a scoped redistribution route policy and permit only selected service networks.
  4. Audit trust boundaries and re-marking configuration across the complete forwarding path.

Explanation

Correct Answer

D:

The directly responsive action is: Audit trust boundaries and re-marking configuration across the complete forwarding path. The specific reported fault is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. Confirmation should show: Packets retain intended service classification through each trusted hop. The supporting technical principle is: End-to-end QoS depends on consistent marking trust and scheduling policy.

Incorrect Answers

A:

“Narrow route-policy scope to the intended neighbor, protocol and prefix sets” responds to another technical or business failure: An import routing policy changes route preference globally when only one partner's redistributed routes should be affected. That source case depends on: Policy association points control which imported routing information is modified. The present issue is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. The more direct action is “Audit trust boundaries and re-marking configuration across the complete forwarding path” because End-to-end QoS depends on consistent marking trust and scheduling policy.

B:

“Correct the prefix-filter network and mask length parameters for intended component routes” responds to another technical or business failure: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. That source case depends on: IP prefix filtering depends on both address prefix and permitted length ranges. The present issue is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. The more direct action is “Audit trust boundaries and re-marking configuration across the complete forwarding path” because End-to-end QoS depends on consistent marking trust and scheduling policy.

C:

“Apply a scoped redistribution route policy and permit only selected service networks” responds to another technical or business failure: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. That source case depends on: Route redistribution crosses protocol boundaries and needs controlled prefix filtering. The present issue is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. The more direct action is “Audit trust boundaries and re-marking configuration across the complete forwarding path” because End-to-end QoS depends on consistent marking trust and scheduling policy.

Question 503

At fictional Oakridge Energy, a network engineer supporting field substations is reviewing route-policy and traffic-control behavior during a production cutover (HCIP-H12-821-POLICY-126). The observed network issue is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. Which ongoing preventive or detective control would best reduce recurrence?

  1. Use per-hop DSCP captures when changing trust boundaries.
  2. Verify boundary prefix lengths whenever modifying route filters.
  3. Test route-policy node hit outcomes using explicit positive and negative prefixes.
  4. Load-test all QoS queues and starvation behavior before enabling strict priority.

Explanation

Correct Answer

A:

The preventive or detective safeguard is: Use per-hop DSCP captures when changing trust boundaries. This directly addresses the recurring fault: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. The corrective action would be: Audit trust boundaries and re-marking configuration across the complete forwarding path. Success is demonstrated when: Packets retain intended service classification through each trusted hop.

Incorrect Answers

B:

“Verify boundary prefix lengths whenever modifying route filters” addresses recurrence of another problem: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. That problem depends on: The preventive or detective safeguard is: Verify boundary prefix lengths whenever modifying route filters. The recurring risk here is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. The more targeted safeguard is “Use per-hop DSCP captures when changing trust boundaries” because the preventive or detective safeguard is: Use per-hop DSCP captures when changing trust boundaries.

C:

“Test route-policy node hit outcomes using explicit positive and negative prefixes” addresses recurrence of another problem: A Huawei route-policy matches a prefix but the engineer expects every route passing the first node to continue through later nodes. That problem depends on: The preventive or detective safeguard is: Test route-policy node hit outcomes using explicit positive and negative prefixes. The recurring risk here is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. The more targeted safeguard is “Use per-hop DSCP captures when changing trust boundaries” because the preventive or detective safeguard is: Use per-hop DSCP captures when changing trust boundaries.

D:

“Load-test all QoS queues and starvation behavior before enabling strict priority” addresses recurrence of another problem: A campus egress port uses weighted scheduling but latency-sensitive voice sits behind large bulk transfers. That problem depends on: The preventive or detective safeguard is: Load-test all QoS queues and starvation behavior before enabling strict priority. The recurring risk here is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. The more targeted safeguard is “Use per-hop DSCP captures when changing trust boundaries” because the preventive or detective safeguard is: Use per-hop DSCP captures when changing trust boundaries.

Question 504

At fictional Oakridge Energy, a network engineer supporting field substations is reviewing route-policy and traffic-control behavior during a production cutover (HCIP-H12-821-POLICY-126). The observed network issue is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. Which routing, switching, or network principle best explains the appropriate solution?

  1. End-to-end QoS depends on consistent marking trust and scheduling policy.
  2. Policy routing can override ordinary destination lookup but still requires valid forwarding resolution.
  3. Ordered route policies evaluate match conditions and actions rather than combining all nodes indiscriminately.
  4. ACL enforcement is sensitive to attachment location and traffic direction.

Explanation

Correct Answer

A:

The governing principle is: End-to-end QoS depends on consistent marking trust and scheduling policy. In this scenario, the appropriate action is: Audit trust boundaries and re-marking configuration across the complete forwarding path. Valid evidence would show: Packets retain intended service classification through each trusted hop.

Incorrect Answers

B:

“Policy routing can override ordinary destination lookup but still requires valid forwarding resolution” responds to another technical or business failure: A policy-based routing rule sends traffic toward a next hop that cannot be resolved in the correct VRF. That source case depends on: Policy routing can override ordinary destination lookup but still requires valid forwarding resolution. The present issue is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. The more direct action is “End-to-end QoS depends on consistent marking trust and scheduling policy” because End-to-end QoS depends on consistent marking trust and scheduling policy.

C:

“Ordered route policies evaluate match conditions and actions rather than combining all nodes indiscriminately” responds to another technical or business failure: A Huawei route-policy matches a prefix but the engineer expects every route passing the first node to continue through later nodes. That source case depends on: Ordered route policies evaluate match conditions and actions rather than combining all nodes indiscriminately. The present issue is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. The more direct action is “End-to-end QoS depends on consistent marking trust and scheduling policy” because End-to-end QoS depends on consistent marking trust and scheduling policy.

D:

“ACL enforcement is sensitive to attachment location and traffic direction” responds to another technical or business failure: An administrator applies an ACL to an ingress interface in the wrong direction and a blocked flow still reaches servers. That source case depends on: ACL enforcement is sensitive to attachment location and traffic direction. The present issue is: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. The more direct action is “End-to-end QoS depends on consistent marking trust and scheduling policy” because End-to-end QoS depends on consistent marking trust and scheduling policy.

Question 505

At fictional Maple Housing, a network engineer supporting property locations is reviewing IPv6 addressing and neighbor discovery during a planned network scaling change (HCIP-H12-821-IPV6-127). The observed network issue is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. Which observation most directly verifies that the corrective change succeeded?

  1. Neighbor cache resolves the legitimate next hop and IPv6 forwarding succeeds.
  2. Test hosts reach remote prefixes through the intended ::/0 next hop.
  3. Traffic tests confirm the authorized request and response directions are treated as designed.
  4. VTEPs can reach one another and approved tenant overlays exchange intended traffic.

Explanation

Correct Answer

B:

The best verification observation is: Test hosts reach remote prefixes through the intended ::/0 next hop. It demonstrates the corrective action: Configure or learn a valid IPv6 default route and verify neighbor reachability separately. This fits the principle: IPv6 addressing, NDP and route selection are separate prerequisites for forwarding. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Neighbor cache resolves the legitimate next hop and IPv6 forwarding succeeds” responds to another technical or business failure: A router forwards IPv6 packets over a link but neighbor solicitation never receives a valid advertisement for the selected next hop. That source case depends on: The best verification observation is: Neighbor cache resolves the legitimate next hop and IPv6 forwarding succeeds. The present issue is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. The more direct action is “Test hosts reach remote prefixes through the intended ::/0 next hop” because the best verification observation is: Test hosts reach remote prefixes through the intended ::/0 next hop.

C:

“Traffic tests confirm the authorized request and response directions are treated as designed” responds to another technical or business failure: An ACL only denies one direction of a TCP conversation and the security team assumes return packets are automatically blocked. That source case depends on: The best verification observation is: Traffic tests confirm the authorized request and response directions are treated as designed. The present issue is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. The more direct action is “Test hosts reach remote prefixes through the intended ::/0 next hop” because the best verification observation is: Test hosts reach remote prefixes through the intended ::/0 next hop.

D:

“VTEPs can reach one another and approved tenant overlays exchange intended traffic” responds to another technical or business failure: A data center project assumes any VXLAN service works without adequate underlay IP reachability between VTEPs. That source case depends on: The best verification observation is: VTEPs can reach one another and approved tenant overlays exchange intended traffic. The present issue is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. The more direct action is “Test hosts reach remote prefixes through the intended ::/0 next hop” because the best verification observation is: Test hosts reach remote prefixes through the intended ::/0 next hop.

Question 506

At fictional Maple Housing, a network engineer supporting property locations is reviewing IPv6 addressing and neighbor discovery during a planned network scaling change (HCIP-H12-821-IPV6-127). The observed network issue is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. Which ongoing preventive or detective control would best reduce recurrence?

  1. Record and compare OSPF interface authentication settings before key rotation.
  2. Verify address, gateway and routing tables during every new IPv6 interface build.
  3. Record RA and DHCPv6 flag requirements for each client segment.
  4. Check spanning-tree topology and loop guards before adding dual uplinks.

Explanation

Correct Answer

B:

The preventive or detective safeguard is: Verify address, gateway and routing tables during every new IPv6 interface build. This directly addresses the recurring fault: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. The corrective action would be: Configure or learn a valid IPv6 default route and verify neighbor reachability separately. Success is demonstrated when: Test hosts reach remote prefixes through the intended ::/0 next hop.

Incorrect Answers

A:

“Record and compare OSPF interface authentication settings before key rotation” addresses recurrence of another problem: An OSPF adjacency repeatedly fails due to mismatched authentication algorithms after a maintenance window. That problem depends on: The preventive or detective safeguard is: Record and compare OSPF interface authentication settings before key rotation. The recurring risk here is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. The more targeted safeguard is “Verify address, gateway and routing tables during every new IPv6 interface build” because the preventive or detective safeguard is: Verify address, gateway and routing tables during every new IPv6 interface build.

C:

“Record RA and DHCPv6 flag requirements for each client segment” addresses recurrence of another problem: An IPv6 access host uses an incorrect address despite receiving a valid network prefix because the advertised M and O flags are misunderstood. That problem depends on: The preventive or detective safeguard is: Record RA and DHCPv6 flag requirements for each client segment. The recurring risk here is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. The more targeted safeguard is “Verify address, gateway and routing tables during every new IPv6 interface build” because the preventive or detective safeguard is: Verify address, gateway and routing tables during every new IPv6 interface build.

D:

“Check spanning-tree topology and loop guards before adding dual uplinks” addresses recurrence of another problem: An Ethernet campus has a physical loop but engineers disable spanning tree to reduce convergence delay. That problem depends on: The preventive or detective safeguard is: Check spanning-tree topology and loop guards before adding dual uplinks. The recurring risk here is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. The more targeted safeguard is “Verify address, gateway and routing tables during every new IPv6 interface build” because the preventive or detective safeguard is: Verify address, gateway and routing tables during every new IPv6 interface build.

Question 507

At fictional Maple Housing, a network engineer supporting property locations is reviewing IPv6 addressing and neighbor discovery during a planned network scaling change (HCIP-H12-821-IPV6-127). The observed network issue is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. Which next engineering action best addresses the reported problem?

  1. Verify and permit authorized BGP TCP transport in both directions without exposing unrelated services.
  2. Configure or learn a valid IPv6 default route and verify neighbor reachability separately.
  3. Match the approved IKE phase parameters, identities and authentication secrets on both sides.
  4. Restore valid ICMPv6 router advertisements and inspect the host's default-router list.

Explanation

Correct Answer

B:

The directly responsive action is: Configure or learn a valid IPv6 default route and verify neighbor reachability separately. The specific reported fault is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. Confirmation should show: Test hosts reach remote prefixes through the intended ::/0 next hop. The supporting technical principle is: IPv6 addressing, NDP and route selection are separate prerequisites for forwarding.

Incorrect Answers

A:

“Verify and permit authorized BGP TCP transport in both directions without exposing unrelated services” responds to another technical or business failure: A border router can ping an eBGP peer yet session establishment fails because firewall ACL blocks TCP port 179. That source case depends on: IP reachability alone does not imply that BGP TCP transport is permitted. The present issue is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. The more direct action is “Configure or learn a valid IPv6 default route and verify neighbor reachability separately” because IPv6 addressing, NDP and route selection are separate prerequisites for forwarding.

C:

“Match the approved IKE phase parameters, identities and authentication secrets on both sides” responds to another technical or business failure: A VPN is configured using incompatible IKE proposal settings on two gateways and the tunnel never forms. That source case depends on: VPN peers must agree on security association proposals and authentication. The present issue is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. The more direct action is “Configure or learn a valid IPv6 default route and verify neighbor reachability separately” because IPv6 addressing, NDP and route selection are separate prerequisites for forwarding.

D:

“Restore valid ICMPv6 router advertisements and inspect the host's default-router list” responds to another technical or business failure: An IPv6 host cannot resolve its default gateway because router advertisements are blocked on the access VLAN. That source case depends on: IPv6 SLAAC and default-router discovery depend on Neighbor Discovery router advertisements. The present issue is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. The more direct action is “Configure or learn a valid IPv6 default route and verify neighbor reachability separately” because IPv6 addressing, NDP and route selection are separate prerequisites for forwarding.

Question 508

At fictional Maple Housing, a network engineer supporting property locations is reviewing IPv6 addressing and neighbor discovery during a planned network scaling change (HCIP-H12-821-IPV6-127). The observed network issue is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. Which routing, switching, or network principle best explains the appropriate solution?

  1. IPv6 uses Neighbor Solicitation and Advertisement in place of ARP for address resolution.
  2. Traffic classification must identify real packets before forwarding or QoS behavior is applied.
  3. IPv6 addressing, NDP and route selection are separate prerequisites for forwarding.
  4. Overlay service identifiers control tenant membership independently of underlay reachability.

Explanation

Correct Answer

C:

The governing principle is: IPv6 addressing, NDP and route selection are separate prerequisites for forwarding. In this scenario, the appropriate action is: Configure or learn a valid IPv6 default route and verify neighbor reachability separately. Valid evidence would show: Test hosts reach remote prefixes through the intended ::/0 next hop.

Incorrect Answers

A:

“IPv6 uses Neighbor Solicitation and Advertisement in place of ARP for address resolution” responds to another technical or business failure: A router forwards IPv6 packets over a link but neighbor solicitation never receives a valid advertisement for the selected next hop. That source case depends on: IPv6 uses Neighbor Solicitation and Advertisement in place of ARP for address resolution. The present issue is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. The more direct action is “IPv6 addressing, NDP and route selection are separate prerequisites for forwarding” because IPv6 addressing, NDP and route selection are separate prerequisites for forwarding.

B:

“Traffic classification must identify real packets before forwarding or QoS behavior is applied” responds to another technical or business failure: A routing policy references a nonexistent ACL and traffic is still sent down the default path. That source case depends on: Traffic classification must identify real packets before forwarding or QoS behavior is applied. The present issue is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. The more direct action is “IPv6 addressing, NDP and route selection are separate prerequisites for forwarding” because IPv6 addressing, NDP and route selection are separate prerequisites for forwarding.

D:

“Overlay service identifiers control tenant membership independently of underlay reachability” responds to another technical or business failure: A fabric advertises a host MAC under the wrong VNI and an engineer changes the global underlay OSPF cost to compensate. That source case depends on: Overlay service identifiers control tenant membership independently of underlay reachability. The present issue is: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. The more direct action is “IPv6 addressing, NDP and route selection are separate prerequisites for forwarding” because IPv6 addressing, NDP and route selection are separate prerequisites for forwarding.

Question 509

At fictional Oakridge Energy, a network engineer supporting field substations is reviewing IGMP and PIM multicast distribution during a baseline compliance test (HCIP-H12-821-MULTICAST-128). The observed network issue is: A receiver sends IGMP membership reports but the local VLAN switch floods the multicast group to every port. Which routing, switching, or network principle best explains the appropriate solution?

  1. IGMP snooping constrains layer-2 multicast replication by observing group membership.
  2. Multicast group addressing must be managed as an intentional shared network namespace.
  3. PIM forwarding state should track downstream interest and prune unused paths.
  4. Multicast state and RPF lookup follow routing-instance separation.

Explanation

Correct Answer

A:

The governing principle is: IGMP snooping constrains layer-2 multicast replication by observing group membership. In this scenario, the appropriate action is: Configure supported IGMP snooping and confirm correct listener port learning. Valid evidence would show: Stream traffic is limited to known interested ports and any required router-facing links.

Incorrect Answers

B:

“Multicast group addressing must be managed as an intentional shared network namespace” responds to another technical or business failure: Multicast packets arrive at the wrong group because the sender application uses a group address overlapping another service. That source case depends on: Multicast group addressing must be managed as an intentional shared network namespace. The present issue is: A receiver sends IGMP membership reports but the local VLAN switch floods the multicast group to every port. The more direct action is “IGMP snooping constrains layer-2 multicast replication by observing group membership” because IGMP snooping constrains layer-2 multicast replication by observing group membership.

C:

“PIM forwarding state should track downstream interest and prune unused paths” responds to another technical or business failure: An upstream router continuously forwards multicast after a branch has no receivers because PIM prune information is missing. That source case depends on: PIM forwarding state should track downstream interest and prune unused paths. The present issue is: A receiver sends IGMP membership reports but the local VLAN switch floods the multicast group to every port. The more direct action is “IGMP snooping constrains layer-2 multicast replication by observing group membership” because IGMP snooping constrains layer-2 multicast replication by observing group membership.

D:

“Multicast state and RPF lookup follow routing-instance separation” responds to another technical or business failure: A multicast over WAN deployment works within a VLAN but fails at the site boundary because the routing instance differs. That source case depends on: Multicast state and RPF lookup follow routing-instance separation. The present issue is: A receiver sends IGMP membership reports but the local VLAN switch floods the multicast group to every port. The more direct action is “IGMP snooping constrains layer-2 multicast replication by observing group membership” because IGMP snooping constrains layer-2 multicast replication by observing group membership.

Question 510

At fictional Oakridge Energy, a network engineer supporting field substations is reviewing IGMP and PIM multicast distribution during a baseline compliance test (HCIP-H12-821-MULTICAST-128). The observed network issue is: A receiver sends IGMP membership reports but the local VLAN switch floods the multicast group to every port. Which next engineering action best addresses the reported problem?

  1. Correct unicast route reachability or multicast RPF path so the incoming interface is valid.
  2. Align IGMP version support and receiver source-filtering expectations.
  3. Enable and validate PIM on all required routed multicast hops in the distribution tree.
  4. Configure supported IGMP snooping and confirm correct listener port learning.

Explanation

Correct Answer

D:

The directly responsive action is: Configure supported IGMP snooping and confirm correct listener port learning. The specific reported fault is: A receiver sends IGMP membership reports but the local VLAN switch floods the multicast group to every port. Confirmation should show: Stream traffic is limited to known interested ports and any required router-facing links. The supporting technical principle is: IGMP snooping constrains layer-2 multicast replication by observing group membership.

Incorrect Answers

A:

“Correct unicast route reachability or multicast RPF path so the incoming interface is valid” responds to another technical or business failure: A multicast forwarding entry receives traffic from a source on the wrong interface and drops it. That source case depends on: Multicast routing uses reverse-path-forwarding checks to prevent loops. The present issue is: A receiver sends IGMP membership reports but the local VLAN switch floods the multicast group to every port. The more direct action is “Configure supported IGMP snooping and confirm correct listener port learning” because IGMP snooping constrains layer-2 multicast replication by observing group membership.

B:

“Align IGMP version support and receiver source-filtering expectations” responds to another technical or business failure: A network expects IGMPv3 source-specific filtering but uses routers configured only for IGMPv2. That source case depends on: IGMPv3 adds source filtering required for source-specific multicast operation. The present issue is: A receiver sends IGMP membership reports but the local VLAN switch floods the multicast group to every port. The more direct action is “Configure supported IGMP snooping and confirm correct listener port learning” because IGMP snooping constrains layer-2 multicast replication by observing group membership.

C:

“Enable and validate PIM on all required routed multicast hops in the distribution tree” responds to another technical or business failure: A multicast receiver has IGMP state locally but the PIM upstream interface is disabled. That source case depends on: Local IGMP membership alone does not carry multicast across routed PIM boundaries. The present issue is: A receiver sends IGMP membership reports but the local VLAN switch floods the multicast group to every port. The more direct action is “Configure supported IGMP snooping and confirm correct listener port learning” because IGMP snooping constrains layer-2 multicast replication by observing group membership.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests