McAfee Secure

Exam Code: H19-301

Exam Name: Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Certification Provider: Huawei

Corresponding Certification: HCPA-IP Network

Huawei H19-301 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

508 Questions & Answers with Testing Engine

"Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU Exam", also known as H19-301 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H19-301 Exam Engine. Your H19-301 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H19-301 Practice Test 20

Question 190

A hypothetical customer planning meeting reports: A carrier WAN unintentionally advertises a customer VRF prefix into a different company's L3VPN. Which architectural weakness BEST accounts for this customer outcome?

  1. Campus topology should match segmentation, scale, operations and resiliency requirements rather than a fixed diagram.
  2. L3VPN segmentation depends on controlled per-VRF route distribution and route-target policy.
  3. Access, provider edge and core router roles have distinct scale, control and service responsibilities.
  4. Unmeasurable service promises cannot guide topology choice or objective acceptance testing.

Explanation

Correct Answer

B:

A carrier WAN unintentionally advertises a customer VRF prefix into a different company's L3VPN. L3VPN segmentation depends on controlled per-VRF route distribution and route-target policy. Repair VRF membership and import/export route-target policy with explicit tenant separation. Routes and traffic are visible only in authorized VPN contexts during isolation tests.

Incorrect Answers

A:

A carrier WAN unintentionally advertises a customer VRF prefix into a different company's L3VPN. Campus topology should match segmentation, scale, operations and resiliency requirements rather than a fixed diagram, whereas L3VPN segmentation depends on controlled per-VRF route distribution and route-target policy.

C:

Access, provider edge and core router roles have distinct scale, control and service responsibilities, while L3VPN segmentation depends on controlled per-VRF route distribution and route-target policy.

D:

Unmeasurable service promises cannot guide topology choice or objective acceptance testing, but L3VPN segmentation depends on controlled per-VRF route distribution and route-target policy.

Question 191

A presales engineer reviews this invented requirement: A railway data network relies on one transport provider route despite requiring uninterrupted operations during cable maintenance. Which underlying network design or operational mechanism MOST directly explains this observation?

  1. SRv6 policy intent must be compatible with valid segments and underlay routing to actually steer traffic.
  2. Port counts cannot determine the required policy architecture when access depends on user and device identity.
  3. Router redundancy cannot offset an outage in a shared single transport path.
  4. L3VPN segmentation depends on controlled per-VRF route distribution and route-target policy.

Explanation

Correct Answer

C:

A railway data network relies on one transport provider route despite requiring uninterrupted operations during cable maintenance. Router redundancy cannot offset an outage in a shared single transport path. Provide suitable route and carrier diversity with defined failover policy and capacity. A planned fiber-cut simulation preserves required traffic within the accepted failover time.

Incorrect Answers

A:

A railway data network relies on one transport provider route despite requiring uninterrupted operations during cable maintenance. SRv6 policy intent must be compatible with valid segments and underlay routing to actually steer traffic, while router redundancy cannot offset an outage in a shared single transport path.

B:

Port counts cannot determine the required policy architecture when access depends on user and device identity, but router redundancy cannot offset an outage in a shared single transport path.

D:

L3VPN segmentation depends on controlled per-VRF route distribution and route-target policy, whereas router redundancy cannot offset an outage in a shared single transport path.

Question 192

An imaginary enterprise networking change reveals: A hospital upgrades its wireless controller during a shift and discovers AP recovery behavior was never tested. Which durable operating practice most directly reduces recurrence?

  1. Retest guest isolation after SSID, VLAN or firewall policy edits.
  2. Require installation photos and measured post-deployment RF acceptance.
  3. Run representative roaming traces after AP and controller software changes.
  4. Include controller outage and AP rejoin tests in WLAN acceptance.

Explanation

Correct Answer

D:

Controller dependencies and supported local forwarding behavior affect service availability during management faults. Choose supported high-availability and AP management options aligned with the continuity requirement. An approved controller outage drill shows expected client forwarding and documented recovery within target. A hospital upgrades its wireless controller during a shift and discovers AP recovery behavior was never tested.

Incorrect Answers

A:

Guest wireless service should be isolated from trusted applications by explicit network controls, but controller dependencies and supported local forwarding behavior affect service availability during management faults.

B:

A hospital upgrades its wireless controller during a shift and discovers AP recovery behavior was never tested. Antenna pattern, mounting height and obstruction placement shape the usable WLAN coverage footprint, whereas controller dependencies and supported local forwarding behavior affect service availability during management faults.

C:

Roaming requires suitable RF overlap, client support and compatible authentication or mobility settings, while controller dependencies and supported local forwarding behavior affect service availability during management faults.

Question 193

During an authorized fictional design review, the team discovers: A city network migrates to centralized automation without checking software interoperability on installed branch gateways. Which proposed remedy BEST aligns with the customer scenario?

  1. Inventory firmware, optics, licenses, protocols and feature support before selecting the transition architecture.
  2. Forecast ports, throughput, client density, power and uplink demand with defined growth and redundancy margins.
  3. Conduct validated site discovery and reconcile every physical and logical endpoint with stakeholder requirements.
  4. Collect role, authentication and segmentation requirements and map them to supported policy enforcement points.

Explanation

Correct Answer

A:

A city network migrates to centralized automation without checking software interoperability on installed branch gateways. An unverified installed-base compatibility assumption can invalidate a solution migration plan. Successful brownfield designs respect supported interoperability and staged change constraints. A limited lab pilot shows agreed protocol and management compatibility between old and new components.

Incorrect Answers

B:

Capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment, whereas an unverified installed-base compatibility assumption can invalidate a solution migration plan.

C:

A city network migrates to centralized automation without checking software interoperability on installed branch gateways. A presales bill of materials cannot be accurate when site, device and connectivity inventories are incomplete, while an unverified installed-base compatibility assumption can invalidate a solution migration plan.

D:

Port counts cannot determine the required policy architecture when access depends on user and device identity, but an unverified installed-base compatibility assumption can invalidate a solution migration plan.

Question 194

A customer proof-of-concept scenario describes: A railway data network relies on one transport provider route despite requiring uninterrupted operations during cable maintenance. Which measurement would MOST convincingly confirm the design is working?

  1. A signed test matrix records input conditions, expected outcomes, actual results and accepted exceptions.
  2. A planned fiber-cut simulation preserves required traffic within the accepted failover time.
  3. External peering tests show only intended routes are accepted and announced under failure scenarios.
  4. A documented capacity assessment and representative traffic test meet the required WAN service targets.

Explanation

Correct Answer

B:

A railway data network relies on one transport provider route despite requiring uninterrupted operations during cable maintenance. Router redundancy cannot offset an outage in a shared single transport path. Provide suitable route and carrier diversity with defined failover policy and capacity.

Incorrect Answers

A:

A proposal lacking objective acceptance evidence cannot demonstrate that promised functions work in context, while router redundancy cannot offset an outage in a shared single transport path.

C:

A railway data network relies on one transport provider route despite requiring uninterrupted operations during cable maintenance. Unrestricted BGP route acceptance or advertisement can redirect or expose critical internal prefixes, but router redundancy cannot offset an outage in a shared single transport path.

D:

A railway data network relies on one transport provider route despite requiring uninterrupted operations during cable maintenance. WAN router models must align with actual forwarding, routing-scale, interface and resilience requirements, whereas router redundancy cannot offset an outage in a shared single transport path. A documented capacity assessment and representative traffic test meet the required WAN service targets.

Question 195

A fictional pre-sales network assessment observes: A small office uses two WAN carriers and address translation remains tied to only one inactive egress circuit. Which underlying network design or operational mechanism MOST directly explains this observation?

  1. SD-WAN tunnel health alone does not measure the end-user quality of application flows.
  2. Cloud access design requires supported regional gateway paths, prefix exchange and authorized security policy.
  3. Internet egress often requires NAT and correct policy binding to the active underlay interface.
  4. Safe SD-WAN replacement requires explicit binding of new hardware identity to the intended site's policy and routes.

Explanation

Correct Answer

C:

A small office uses two WAN carriers and address translation remains tied to only one inactive egress circuit. Internet egress often requires NAT and correct policy binding to the active underlay interface. Configure approved dynamic NAT or source translation for each intended internet access path. Public destinations see expected translated sources and failover continues without leaking RFC1918 addresses.

Incorrect Answers

A:

SD-WAN tunnel health alone does not measure the end-user quality of application flows, but internet egress often requires NAT and correct policy binding to the active underlay interface.

B:

Cloud access design requires supported regional gateway paths, prefix exchange and authorized security policy, whereas internet egress often requires NAT and correct policy binding to the active underlay interface.

D:

Safe SD-WAN replacement requires explicit binding of new hardware identity to the intended site's policy and routes, while internet egress often requires NAT and correct policy binding to the active underlay interface.

Question 196

A hypothetical customer planning meeting reports: An international campus is proposed as one flat broadcast domain despite thousands of endpoints and distinct buildings. What is the MOST appropriate response for the described deployment?

  1. Inventory firmware, optics, licenses, protocols and feature support before selecting the transition architecture.
  2. Conduct validated site discovery and reconcile every physical and logical endpoint with stakeholder requirements.
  3. Specify documented standards, interface versions, data formats and integration proof tests before contracting.
  4. Choose an appropriate access, aggregation and core design proportional to the verified business scale.

Explanation

Correct Answer

D:

An international campus is proposed as one flat broadcast domain despite thousands of endpoints and distinct buildings. Campus topology should match segmentation, scale, operations and resiliency requirements rather than a fixed diagram. Hierarchical network design is a means to achieve measurable scale and fault isolation. Validated failure, broadcast-scope and port-capacity tests meet the customer's scenario requirements.

Incorrect Answers

A:

An international campus is proposed as one flat broadcast domain despite thousands of endpoints and distinct buildings. An unverified installed-base compatibility assumption can invalidate a solution migration plan, whereas campus topology should match segmentation, scale, operations and resiliency requirements rather than a fixed diagram.

B:

An international campus is proposed as one flat broadcast domain despite thousands of endpoints and distinct buildings. A presales bill of materials cannot be accurate when site, device and connectivity inventories are incomplete, while campus topology should match segmentation, scale, operations and resiliency requirements rather than a fixed diagram. Specify documented standards, interface versions, data formats and integration proof tests before contracting.

C:

Integration expectations fail when required interfaces and supported protocol versions are not validated, but campus topology should match segmentation, scale, operations and resiliency requirements rather than a fixed diagram.

Question 197

A hypothetical customer planning meeting reports: A distributed workforce sends all cloud-bound enterprise traffic through an old headquarters hub despite an approved regional gateway. What is the MOST appropriate response for the described deployment?

  1. Enable an approved cloud gateway/on-ramp topology and validate routes, tunnel policy and egress controls.
  2. Collect supported application performance, per-link loss, latency and path-selection telemetry in the controller.
  3. Enroll each authorized branch device using supported Huawei SD-WAN ZTP methods and verified site assignments.
  4. Constrain regulated applications to approved central hubs or equivalent verified inspection paths.

Explanation

Correct Answer

A:

A distributed workforce sends all cloud-bound enterprise traffic through an old headquarters hub despite an approved regional gateway. Cloud access design requires supported regional gateway paths, prefix exchange and authorized security policy. Cloud on-ramp is an end-to-end route and security design, not simply another WAN interface. Authorized cloud application flows use the selected regional path with measured performance and logged access.

Incorrect Answers

B:

SD-WAN tunnel health alone does not measure the end-user quality of application flows, while cloud access design requires supported regional gateway paths, prefix exchange and authorized security policy.

C:

A distributed workforce sends all cloud-bound enterprise traffic through an old headquarters hub despite an approved regional gateway. Zero-touch deployment fails when device identity, onboarding credentials and site templates are not bound correctly, but cloud access design requires supported regional gateway paths, prefix exchange and authorized security policy.

D:

Local breakout is inappropriate where business policy requires traffic to traverse centralized enforcement, whereas cloud access design requires supported regional gateway paths, prefix exchange and authorized security policy.

Question 198

A presales engineer reviews this invented requirement: A lecture hall installs ceiling APs behind metal fixtures, creating unexpected shadowing and inconsistent signal. What root networking concern should be resolved first?

  1. Operational skills and staffing limit which features and deployment models can be supported reliably.
  2. Antenna pattern, mounting height and obstruction placement shape the usable WLAN coverage footprint.
  3. Capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment.
  4. A proposal lacking objective acceptance evidence cannot demonstrate that promised functions work in context.

Explanation

Correct Answer

B:

A lecture hall installs ceiling APs behind metal fixtures, creating unexpected shadowing and inconsistent signal. Antenna pattern, mounting height and obstruction placement shape the usable WLAN coverage footprint. Correct antenna orientation and AP location based on measured RF characteristics and venue constraints. Post-install heat maps and user tests show coverage and capacity in the intended service zone.

Incorrect Answers

A:

A lecture hall installs ceiling APs behind metal fixtures, creating unexpected shadowing and inconsistent signal. Operational skills and staffing limit which features and deployment models can be supported reliably, but antenna pattern, mounting height and obstruction placement shape the usable WLAN coverage footprint.

C:

Capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment, whereas antenna pattern, mounting height and obstruction placement shape the usable WLAN coverage footprint.

D:

A lecture hall installs ceiling APs behind metal fixtures, creating unexpected shadowing and inconsistent signal. A proposal lacking objective acceptance evidence cannot demonstrate that promised functions work in context, while antenna pattern, mounting height and obstruction placement shape the usable WLAN coverage footprint.

Question 199

An imaginary enterprise networking change reveals: A stadium offers open guest Wi-Fi but its visitors can discover the network's facilities-management servers. What recurring review control BEST prevents this class of issue?

  1. Update WLAN density models after event or device population changes.
  2. Draw separate data-plane and management-plane diagrams in design reviews.
  3. Retest guest isolation after SSID, VLAN or firewall policy edits.
  4. Reassess hierarchy choice after material changes in campus size and criticality.

Explanation

Correct Answer

C:

Guest wireless service should be isolated from trusted applications by explicit network controls. Map guest SSIDs to restricted segments with approved internet egress and client isolation where needed. Guest devices browse approved destinations without reaching restricted management or payment services. A stadium offers open guest Wi-Fi but its visitors can discover the network's facilities-management servers.

Incorrect Answers

A:

High client density and airtime contention can limit per-user throughput even when received signal is strong, whereas guest wireless service should be isolated from trusted applications by explicit network controls.

B:

A stadium offers open guest Wi-Fi but its visitors can discover the network's facilities-management servers. Management or orchestration systems do not automatically replace the forwarding functions of network devices, while guest wireless service should be isolated from trusted applications by explicit network controls.

D:

Campus topology should match segmentation, scale, operations and resiliency requirements rather than a fixed diagram, but guest wireless service should be isolated from trusted applications by explicit network controls.

Question 200

An imaginary enterprise networking change reveals: A solution architect builds a Huawei presales configuration in an old SCT template that omits newly proposed interfaces. Which controlled design change MOST directly addresses this failure?

  1. Define observable test cases for critical workloads, failure paths, policy enforcement and managed rollout.
  2. Version the SCT design, document deviations, and obtain customer signoff for changed constraints.
  3. Forecast ports, throughput, client density, power and uplink demand with defined growth and redundancy margins.
  4. Validate the intended SCT catalog version and customer topology before producing a configuration proposal.

Explanation

Correct Answer

D:

A solution architect builds a Huawei presales configuration in an old SCT template that omits newly proposed interfaces. Presales configuration tools depend on current supported catalogs and accurate topology inputs. A design-tool output can only be trusted within the supported product and input assumptions. The tool's selected platform, ports and major topology objects match approved source requirements.

Incorrect Answers

A:

A proposal lacking objective acceptance evidence cannot demonstrate that promised functions work in context, while presales configuration tools depend on current supported catalogs and accurate topology inputs.

B:

Untracked commercial revisions can invalidate previously approved technical scope and resilience requirements, but presales configuration tools depend on current supported catalogs and accurate topology inputs.

C:

Capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment, whereas presales configuration tools depend on current supported catalogs and accurate topology inputs.

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU (H19-301) Practice Tests