McAfee Secure

Exam Code: H19-301

Exam Name: Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Certification Provider: Huawei

Corresponding Certification: HCPA-IP Network

Huawei H19-301 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

508 Questions & Answers with Testing Engine

"Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU Exam", also known as H19-301 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H19-301 Exam Engine. Your H19-301 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H19-301 Practice Test 77

Question 760

An imaginary enterprise networking change reveals: A data center adds server racks but all east-west flows still cross one aggregation switch and congestion grows. What observable result BEST validates the recommended correction?

  1. Representatively loaded RDMA traffic meets loss and tail-latency criteria without congestion spreading uncontrollably.
  2. The post-change device state matches approved intent and adverse simulations are caught before production.
  3. A controlled shared-component outage stays within documented impact limits or is explicitly mitigated.
  4. East-west throughput and failure drills satisfy the customer demand model across alternative spine paths.

Explanation

Correct Answer

D:

A data center adds server racks but all east-west flows still cross one aggregation switch and congestion grows. A non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks. Design supported CloudEngine leaf-spine connections with appropriate parallel routed paths and capacity.

Incorrect Answers

A:

A data center adds server racks but all east-west flows still cross one aggregation switch and congestion grows. RDMA-based Ethernet storage may require supported congestion management and low-loss fabric settings to avoid severe performance loss, whereas a non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks.

B:

Controller-driven fabrics can drift if manual device state conflicts with the authoritative design model, while a non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks.

C:

High-availability fabric claims fail when parallel logical paths share an unmodeled physical dependency, but a non-scalable fabric topology concentrates east-west traffic and creates common bottlenecks.

Question 761

A customer proof-of-concept scenario describes: A small campus merges two routed segments but a manually configured OSPF area differs across the link. What long-term safeguard should the design handoff establish?

  1. Validate OSPF interface templates before rolling out routed access changes.
  2. Monitor per-path health and next-hop changes during ECMP design reviews.
  3. Check LACP partner identity and member state after each switch or server NIC change.
  4. Review BGP prefix-list and policy changes against approved address scope before deployment.

Explanation

Correct Answer

A:

OSPF neighbors on a link must have compatible area and selected protocol parameters before exchanging routes. Correct the routed interface OSPF area and verify essential hello and authentication settings. The intended adjacency reaches full state and authorized prefixes appear in the route table. A small campus merges two routed segments but a manually configured OSPF area differs across the link.

Incorrect Answers

B:

Equal-cost forwarding distributes traffic among eligible next hops without guaranteeing each path is healthy, while OSPF neighbors on a link must have compatible area and selected protocol parameters before exchanging routes.

C:

A small campus merges two routed segments but a manually configured OSPF area differs across the link. Aggregated Ethernet links require compatible peer configuration and member state to forward predictably, but OSPF neighbors on a link must have compatible area and selected protocol parameters before exchanging routes.

D:

A small campus merges two routed segments but a manually configured OSPF area differs across the link. Unbounded BGP advertisements can leak unintended routes beyond a trust or administrative boundary, whereas OSPF neighbors on a link must have compatible area and selected protocol parameters before exchanging routes.

Question 762

A fictional pre-sales network assessment observes: A hospital installs a backup gateway without a supported first-hop redundancy plan, leaving local clients stranded on failure. What prioritized technical adjustment should the presales plan include?

  1. Use supported LLDP neighbor records and physical verification to reconcile the intended campus topology.
  2. Configure and test an approved redundant gateway protocol and consistent virtual address ownership.
  3. Recalculate per-port power requirements and switch power supplies, then distribute load or select suitable PoE capacity.
  4. Assign guest and contractor roles to restricted segments with explicit egress and service policies.

Explanation

Correct Answer

B:

A hospital installs a backup gateway without a supported first-hop redundancy plan, leaving local clients stranded on failure. Two gateway devices need a coordinated virtual default gateway mechanism or comparable supported failover design. Gateway availability depends on first-hop continuity, not merely multiple switches existing nearby. Clients continue to reach approved networks after active gateway loss with bounded convergence interruption.

Incorrect Answers

A:

Stale physical connectivity inventories obscure peer identities and increase change risk, but two gateway devices need a coordinated virtual default gateway mechanism or comparable supported failover design.

C:

PoE port count alone does not guarantee enough power for the connected device class and aggregate load, whereas two gateway devices need a coordinated virtual default gateway mechanism or comparable supported failover design.

D:

Untrusted access roles must be isolated from production services even when they share hardware, while two gateway devices need a coordinated virtual default gateway mechanism or comparable supported failover design.

Question 763

A fictional pre-sales network assessment observes: A small office is quoted a large modular three-tier topology without a functional reason while operating costs climb. Which governance or validation step should be repeated after future changes?

  1. Keep a stakeholder-approved access matrix aligned with product selection.
  2. Require version and capability checks before committing migration dates or equipment orders.
  3. Reassess hierarchy choice after material changes in campus size and criticality.
  4. Require operator acceptance and training evidence before production handover.

Explanation

Correct Answer

C:

Campus topology should match segmentation, scale, operations and resiliency requirements rather than a fixed diagram. Choose an appropriate access, aggregation and core design proportional to the verified business scale. Validated failure, broadcast-scope and port-capacity tests meet the customer's scenario requirements. A small office is quoted a large modular three-tier topology without a functional reason while operating costs climb.

Incorrect Answers

A:

Port counts cannot determine the required policy architecture when access depends on user and device identity, whereas campus topology should match segmentation, scale, operations and resiliency requirements rather than a fixed diagram.

B:

A small office is quoted a large modular three-tier topology without a functional reason while operating costs climb. An unverified installed-base compatibility assumption can invalidate a solution migration plan, while campus topology should match segmentation, scale, operations and resiliency requirements rather than a fixed diagram.

D:

Operational skills and staffing limit which features and deployment models can be supported reliably, but campus topology should match segmentation, scale, operations and resiliency requirements rather than a fixed diagram.

Question 764

Consider a simulated customer-network deployment: A regional airport office has client interruptions because its AP channel plan ignores dynamic frequency selection behavior. Which durable operating practice most directly reduces recurrence?

  1. Reassess RF channel plans after adding radios or changing building layouts.
  2. Retest guest isolation after SSID, VLAN or firewall policy edits.
  3. Require a signed site and workload inventory before issuing a binding solution proposal.
  4. Include DFS and regional regulatory settings in wireless change reviews.

Explanation

Correct Answer

D:

Regulated DFS operation may require channels to change when radar-like signals are detected. Select supported compliant channels and client resilience settings with a site-specific interference plan. A controlled channel-change observation meets the service interruption tolerance and compliance policy. A regional airport office has client interruptions because its AP channel plan ignores dynamic frequency selection behavior.

Incorrect Answers

A:

A regional airport office has client interruptions because its AP channel plan ignores dynamic frequency selection behavior. Overlapping radios on the same channel may increase contention and reduce effective cell capacity, while regulated DFS operation may require channels to change when radar-like signals are detected.

B:

Guest wireless service should be isolated from trusted applications by explicit network controls, but regulated DFS operation may require channels to change when radar-like signals are detected.

C:

Consider a simulated customer-network deployment: A regional airport office has client interruptions because its AP channel plan ignores dynamic frequency selection behavior. A regional airport office has client interruptions because its AP channel plan ignores dynamic frequency selection behavior. A presales bill of materials cannot be accurate when site, device and connectivity inventories are incomplete, whereas regulated DFS operation may require channels to change when radar-like signals are detected.

Question 765

A presales engineer reviews this invented requirement: A multinational customer demands interoperability with existing systems while no protocol or API acceptance tests are scoped. Which proposed remedy BEST aligns with the customer scenario?

  1. Specify documented standards, interface versions, data formats and integration proof tests before contracting.
  2. Inventory firmware, optics, licenses, protocols and feature support before selecting the transition architecture.
  3. Define observable test cases for critical workloads, failure paths, policy enforcement and managed rollout.
  4. Document the data path, control responsibilities and management-system dependencies separately.

Explanation

Correct Answer

A:

A multinational customer demands interoperability with existing systems while no protocol or API acceptance tests are scoped. Integration expectations fail when required interfaces and supported protocol versions are not validated. Interoperability must be demonstrated at concrete interfaces rather than asserted from product category labels. A representative external tool collects telemetry and performs approved workflows through supported interfaces.

Incorrect Answers

B:

A multinational customer demands interoperability with existing systems while no protocol or API acceptance tests are scoped. An unverified installed-base compatibility assumption can invalidate a solution migration plan, but integration expectations fail when required interfaces and supported protocol versions are not validated.

C:

A multinational customer demands interoperability with existing systems while no protocol or API acceptance tests are scoped. A proposal lacking objective acceptance evidence cannot demonstrate that promised functions work in context, whereas integration expectations fail when required interfaces and supported protocol versions are not validated.

D:

A multinational customer demands interoperability with existing systems while no protocol or API acceptance tests are scoped. Management or orchestration systems do not automatically replace the forwarding functions of network devices, while integration expectations fail when required interfaces and supported protocol versions are not validated.

Question 766

A presales engineer reviews this invented requirement: Two servers connect redundantly to adjacent leaf switches but a peer-failure event produces duplicate forwarding paths. Which proposed remedy BEST aligns with the customer scenario?

  1. Enable supported iMaster NCE-FabricInsight or equivalent flow, queue and path telemetry with approved retention.
  2. Select supported multihoming or link-aggregation design across compatible leaf peers and host NICs.
  3. Apply supported VRF or overlay segmentation and policy enforcement between workload security zones.
  4. Restore supported VTEP loopback routes and check MTU for overlay encapsulation along the underlay.

Explanation

Correct Answer

B:

Two servers connect redundantly to adjacent leaf switches but a peer-failure event produces duplicate forwarding paths. Redundant multihomed Ethernet connections require coordinated forwarding and loop avoidance mechanisms. Dual attachment is resilient only if the devices coordinate ownership and forwarding state. Single-leaf failure tests preserve authorized connectivity with no persistent loops or duplicate flows.

Incorrect Answers

A:

A presales engineer reviews this invented requirement: Two servers connect redundantly to adjacent leaf switches but a peer-failure event produces duplicate forwarding paths. Two servers connect redundantly to adjacent leaf switches but a peer-failure event produces duplicate forwarding paths. Coarse availability signals cannot identify short-lived fabric congestion and path problems, whereas redundant multihomed Ethernet connections require coordinated forwarding and loop avoidance mechanisms.

C:

A shared data-center fabric must enforce application security boundaries independently of physical rack topology, while redundant multihomed Ethernet connections require coordinated forwarding and loop avoidance mechanisms.

D:

VXLAN encapsulation requires Layer 3 reachability between the tunnel endpoints carrying its outer packets, but redundant multihomed Ethernet connections require coordinated forwarding and loop avoidance mechanisms.

Question 767

During an authorized fictional design review, the team discovers: A logistics customer wants reliable scanner connectivity while no agreed latency or recovery objective appears in acceptance criteria. What recurring review control BEST prevents this class of issue?

  1. Require operator acceptance and training evidence before production handover.
  2. Revalidate lifecycle assumptions and renewal obligations before commercial approval.
  3. Review service-level objectives at design, acceptance and major change milestones.
  4. Review capacity forecasts after new sites, users or application rollouts.

Explanation

Correct Answer

C:

Unmeasurable service promises cannot guide topology choice or objective acceptance testing. Translate customer outcomes into specific uptime, loss, latency, recovery and maintenance measures. Stakeholders approve numerical service targets and independent tests can prove each requirement. A logistics customer wants reliable scanner connectivity while no agreed latency or recovery objective appears in acceptance criteria.

Incorrect Answers

A:

During an authorized fictional design review, the team discovers: A logistics customer wants reliable scanner connectivity while no agreed latency or recovery objective appears in acceptance criteria. A logistics customer wants reliable scanner connectivity while no agreed latency or recovery objective appears in acceptance criteria. Operational skills and staffing limit which features and deployment models can be supported reliably, while unmeasurable service promises cannot guide topology choice or objective acceptance testing.

B:

A logistics customer wants reliable scanner connectivity while no agreed latency or recovery objective appears in acceptance criteria. Initial acquisition price alone cannot represent a network solution's long-term total cost, but unmeasurable service promises cannot guide topology choice or objective acceptance testing.

D:

Capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment, whereas unmeasurable service promises cannot guide topology choice or objective acceptance testing.

Question 768

During an authorized fictional design review, the team discovers: A metropolitan backbone has two paths but latency-sensitive workloads never use the intended engineered route. What recurring review control BEST prevents this class of issue?

  1. Require a signed site and workload inventory before issuing a binding solution proposal.
  2. Reassess PE service requirements whenever introducing new VPN or subscriber capabilities.
  3. Validate transceiver part numbers and link budgets before placing orders.
  4. Review segment policies after IGP topology and service changes.

Explanation

Correct Answer

D:

SRv6 policy intent must be compatible with valid segments and underlay routing to actually steer traffic. Validate supported SRv6 segment lists and constraint policies against current topology and service requirements. Path tracing confirms traffic follows an approved eligible route and meets its latency objectives. A metropolitan backbone has two paths but latency-sensitive workloads never use the intended engineered route.

Incorrect Answers

A:

A presales bill of materials cannot be accurate when site, device and connectivity inventories are incomplete, but SRv6 policy intent must be compatible with valid segments and underlay routing to actually steer traffic.

B:

Access, provider edge and core router roles have distinct scale, control and service responsibilities, whereas SRv6 policy intent must be compatible with valid segments and underlay routing to actually steer traffic.

C:

During an authorized fictional design review, the team discovers: A metropolitan backbone has two paths but latency-sensitive workloads never use the intended engineered route. A metropolitan backbone has two paths but latency-sensitive workloads never use the intended engineered route. Physical port compatibility requires matching optics, reach, medium and negotiated interface capabilities, while SRv6 policy intent must be compatible with valid segments and underlay routing to actually steer traffic.

Question 769

A fictional pre-sales network assessment observes: A data-center operations team investigates a WAN outage but access-switch events cannot be correlated with controller alarms. Which proposed remedy BEST aligns with the customer scenario?

  1. Synchronize supported network devices to approved time sources and consistent time-zone conventions.
  2. Reconcile LACP mode, port speed and member compatibility at both endpoints before bundling.
  3. Remove the uncontrolled loop and design supported STP or an appropriate loop-free redundant topology.
  4. Set compatible path MTUs or repair supported PMTU discovery and tunnel overhead planning.

Explanation

Correct Answer

A:

A data-center operations team investigates a WAN outage but access-switch events cannot be correlated with controller alarms. Unsynchronized device clocks distort event sequence and undermine incident root-cause analysis. Reliable network observability depends on shared time as well as collecting event data. A controlled cross-device event has timestamps within the documented correlation tolerance.

Incorrect Answers

B:

A data-center operations team investigates a WAN outage but access-switch events cannot be correlated with controller alarms. Aggregated Ethernet links require compatible peer configuration and member state to forward predictably, whereas unsynchronized device clocks distort event sequence and undermine incident root-cause analysis. Reconcile LACP mode, port speed and member compatibility at both endpoints before bundling.

C:

A data-center operations team investigates a WAN outage but access-switch events cannot be correlated with controller alarms. An uncontrolled Layer 2 loop can replicate frames and exhaust switch forwarding capacity, while unsynchronized device clocks distort event sequence and undermine incident root-cause analysis.

D:

A data-center operations team investigates a WAN outage but access-switch events cannot be correlated with controller alarms. Packets larger than a path can carry may be dropped if fragmentation or discovery signaling is mishandled, but unsynchronized device clocks distort event sequence and undermine incident root-cause analysis. Set compatible path MTUs or repair supported PMTU discovery and tunnel overhead planning.

Question 770

A fictional pre-sales network assessment observes: A two-spine topology has separate switches but shares one power distribution and one optical cross-connect. What long-term safeguard should the design handoff establish?

  1. Retest transport loss and congestion after introducing RoCE or changing switch firmware.
  2. Conduct shared-risk reviews before signing off dual-fabric availability.
  3. Validate route-target and VNI inventories before new tenant activation.
  4. Retest segmentation after tenant and microservice placement changes.

Explanation

Correct Answer

B:

High-availability fabric claims fail when parallel logical paths share an unmodeled physical dependency. Map power, cabling, upstream gateway and switch failure domains to the required resilience target. A controlled shared-component outage stays within documented impact limits or is explicitly mitigated. A two-spine topology has separate switches but shares one power distribution and one optical cross-connect.

Incorrect Answers

A:

A two-spine topology has separate switches but shares one power distribution and one optical cross-connect. RDMA-based Ethernet storage may require supported congestion management and low-loss fabric settings to avoid severe performance loss, while high-availability fabric claims fail when parallel logical paths share an unmodeled physical dependency.

C:

A two-spine topology has separate switches but shares one power distribution and one optical cross-connect. Overlay tenant isolation requires consistent VNI, route-target and virtual-routing context mapping, but high-availability fabric claims fail when parallel logical paths share an unmodeled physical dependency.

D:

A shared data-center fabric must enforce application security boundaries independently of physical rack topology, whereas high-availability fabric claims fail when parallel logical paths share an unmodeled physical dependency.

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU (H19-301) Practice Tests