McAfee Secure

Exam Code: H19-301

Exam Name: Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Certification Provider: Huawei

Corresponding Certification: HCPA-IP Network

Huawei H19-301 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

508 Questions & Answers with Testing Engine

"Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU Exam", also known as H19-301 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H19-301 Exam Engine. Your H19-301 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H19-301 Practice Test 79

Question 780

A presales engineer reviews this invented requirement: A hotel guest SSID shares the same unrestricted subnet as back-office payment systems. Which underlying network design or operational mechanism MOST directly explains this observation?

  1. Capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment.
  2. Roaming requires suitable RF overlap, client support and compatible authentication or mobility settings.
  3. An unverified installed-base compatibility assumption can invalidate a solution migration plan.
  4. Guest wireless service should be isolated from trusted applications by explicit network controls.

Explanation

Correct Answer

D:

A hotel guest SSID shares the same unrestricted subnet as back-office payment systems. Guest wireless service should be isolated from trusted applications by explicit network controls. Map guest SSIDs to restricted segments with approved internet egress and client isolation where needed. Guest devices browse approved destinations without reaching restricted management or payment services.

Incorrect Answers

A:

Capacity designs without measured growth assumptions risk premature congestion or excessive unused equipment, but guest wireless service should be isolated from trusted applications by explicit network controls.

B:

Roaming requires suitable RF overlap, client support and compatible authentication or mobility settings, whereas guest wireless service should be isolated from trusted applications by explicit network controls.

C:

An unverified installed-base compatibility assumption can invalidate a solution migration plan, while guest wireless service should be isolated from trusted applications by explicit network controls.

Question 781

During an authorized fictional design review, the team discovers: A university extends an isolated tenant across routed building links while a VNI mapping is missing on one switch. How should the team verify that the customer requirement is satisfied?

  1. Authorized same-tenant traffic crosses the intended fabric while separate tenants remain isolated.
  2. Recorded switch-port neighbors match the actual peer devices after a controlled link trace.
  3. An unauthorized edge switch connection is contained without destabilizing the legitimate campus fabric.
  4. A controlled user move preserves intended permitted applications without exposing restricted ones.

Explanation

Correct Answer

A:

A university extends an isolated tenant across routed building links while a VNI mapping is missing on one switch. Overlay segment mapping must match the underlay reachability and intended virtual network identifiers. Verify VLAN-to-VNI mapping, gateway roles and supported VXLAN control information across the campus fabric.

Incorrect Answers

B:

Stale physical connectivity inventories obscure peer identities and increase change risk, whereas overlay segment mapping must match the underlay reachability and intended virtual network identifiers.

C:

Misapplied STP edge and protection settings can allow unsafe topology changes or disable legitimate links, while overlay segment mapping must match the underlay reachability and intended virtual network identifiers.

D:

Location-dependent ACL assumptions can conflict with a design seeking identity-based free mobility, but overlay segment mapping must match the underlay reachability and intended virtual network identifiers.

Question 782

During an authorized fictional design review, the team discovers: A manufacturer moves authenticated warehouse scanners between buildings but port-by-port VLAN settings cause wrong access. Which architectural weakness BEST accounts for this customer outcome?

  1. Inter-VLAN communication requires correctly placed Layer 3 interfaces and explicit routing or policy.
  2. Static port-only authorization cannot reliably follow a roaming user or managed device identity.
  3. Misapplied STP edge and protection settings can allow unsafe topology changes or disable legitimate links.
  4. Location-dependent ACL assumptions can conflict with a design seeking identity-based free mobility.

Explanation

Correct Answer

B:

A manufacturer moves authenticated warehouse scanners between buildings but port-by-port VLAN settings cause wrong access. Static port-only authorization cannot reliably follow a roaming user or managed device identity. Use supported role-aware NAC and policy assignment that maps approved identity to VLAN or security groups. The same authorized device receives equivalent intended access on different compliant switch ports.

Incorrect Answers

A:

Inter-VLAN communication requires correctly placed Layer 3 interfaces and explicit routing or policy, while static port-only authorization cannot reliably follow a roaming user or managed device identity.

C:

Misapplied STP edge and protection settings can allow unsafe topology changes or disable legitimate links, but static port-only authorization cannot reliably follow a roaming user or managed device identity.

D:

Location-dependent ACL assumptions can conflict with a design seeking identity-based free mobility, whereas static port-only authorization cannot reliably follow a roaming user or managed device identity.

Question 783

A fictional pre-sales network assessment observes: A data center migration assumes a shared L2 network will preserve service without checking latency and failure-domain coupling. Which controlled design change MOST directly addresses this failure?

  1. Apply supported iMaster NCE-Fabric change plans with preview, validation and controlled rollback.
  2. Audit BGP sessions and allowed infrastructure prefixes at each leaf and spine boundary.
  3. Evaluate supported DCI routing, controlled extension and workload mobility requirements before designing the inter-site segment.
  4. Restore supported VTEP loopback routes and check MTU for overlay encapsulation along the underlay.

Explanation

Correct Answer

C:

A data center migration assumes a shared L2 network will preserve service without checking latency and failure-domain coupling. Stretched Layer 2 across sites increases fault propagation and depends on appropriate convergence and loop controls. Inter-site connectivity must address failure domains and application state rather than extend VLANs reflexively. A planned inter-site fault test confines the failure while the intended applications recover within target.

Incorrect Answers

A:

Controller-driven fabrics can drift if manual device state conflicts with the authoritative design model, but stretched Layer 2 across sites increases fault propagation and depends on appropriate convergence and loop controls.

B:

A fabric routing underlay needs accurate neighbor policies and reachability for infrastructure prefixes, whereas stretched Layer 2 across sites increases fault propagation and depends on appropriate convergence and loop controls.

D:

A data center migration assumes a shared L2 network will preserve service without checking latency and failure-domain coupling. VXLAN encapsulation requires Layer 3 reachability between the tunnel endpoints carrying its outer packets, while stretched Layer 2 across sites increases fault propagation and depends on appropriate convergence and loop controls.

Question 784

A fictional pre-sales network assessment observes: A financial branch deploys two equal-cost paths but one path contains a failing port, so some payment sessions time out. Which controlled design change MOST directly addresses this failure?

  1. Configure an authorized DHCP relay target on the client VLAN gateway and ensure request and reply routing.
  2. Correct host masks and default gateway assignment against the approved IP address plan, then validate router interfaces.
  3. Align routing or supported state synchronization so both directions traverse an accepted security path.
  4. Remove or repair the impaired next hop and validate path health or supported fast detection mechanisms.

Explanation

Correct Answer

D:

A financial branch deploys two equal-cost paths but one path contains a failing port, so some payment sessions time out. Equal-cost forwarding distributes traffic among eligible next hops without guaranteeing each path is healthy. Aggregate path availability requires validating every next hop, not just one successful ping. Repeated flow tests succeed across all remaining eligible routes and loss rates meet acceptance limits.

Incorrect Answers

A:

A financial branch deploys two equal-cost paths but one path contains a failing port, so some payment sessions time out. DHCP broadcast discovery does not inherently cross routers without a relay or local DHCP service, whereas equal-cost forwarding distributes traffic among eligible next hops without guaranteeing each path is healthy.

B:

Hosts cannot route outside their local subnet when addressing and gateway placement are inconsistent, while equal-cost forwarding distributes traffic among eligible next hops without guaranteeing each path is healthy.

C:

Stateful security devices can drop legitimate return packets when forward and return flows bypass the same tracked policy context, but equal-cost forwarding distributes traffic among eligible next hops without guaranteeing each path is healthy.

Question 785

Consider a simulated customer-network deployment: A controller failover changes the next-hop MAC but one client retains an obsolete ARP binding and experiences blackholing. What long-term safeguard should the design handoff establish?

  1. Include neighbor convergence checks after planned gateway replacement and failover operations.
  2. Audit time-source health and log timestamp coherence during operations readiness checks.
  3. Monitor per-path health and next-hop changes during ECMP design reviews.
  4. Check LACP partner identity and member state after each switch or server NIC change.

Explanation

Correct Answer

A:

An outdated IPv4 neighbor entry can direct frames to a MAC that no longer owns the destination IP. Inspect and refresh learned ARP state while verifying valid gratuitous ARP or supported failover signaling. Neighbor entries converge on the active device MAC and bidirectional traffic resumes without permanent static mappings. A controller failover changes the next-hop MAC but one client retains an obsolete ARP binding and experiences blackholing.

Incorrect Answers

B:

Unsynchronized device clocks distort event sequence and undermine incident root-cause analysis, while an outdated IPv4 neighbor entry can direct frames to a MAC that no longer owns the destination IP.

C:

A controller failover changes the next-hop MAC but one client retains an obsolete ARP binding and experiences blackholing. Equal-cost forwarding distributes traffic among eligible next hops without guaranteeing each path is healthy, but an outdated IPv4 neighbor entry can direct frames to a MAC that no longer owns the destination IP.

D:

A controller failover changes the next-hop MAC but one client retains an obsolete ARP binding and experiences blackholing. Aggregated Ethernet links require compatible peer configuration and member state to forward predictably, whereas an outdated IPv4 neighbor entry can direct frames to a MAC that no longer owns the destination IP.

Question 786

A presales engineer reviews this invented requirement: A private MPLS backbone exports internal loopbacks to an external peer after routing policy simplification. Which measurement would MOST convincingly confirm the design is working?

  1. Routes and traffic are visible only in authorized VPN contexts during isolation tests.
  2. External peering tests show only intended routes are accepted and announced under failure scenarios.
  3. Validated failure, broadcast-scope and port-capacity tests meet the customer's scenario requirements.
  4. An authorized single-domain failure drill maintains the specified critical services.

Explanation

Correct Answer

B:

A private MPLS backbone exports internal loopbacks to an external peer after routing policy simplification. Unrestricted BGP route acceptance or advertisement can redirect or expose critical internal prefixes. Implement explicit inbound and outbound BGP policy with approved prefix, next-hop and route-preference criteria.

Incorrect Answers

A:

A presales engineer reviews this invented requirement: A private MPLS backbone exports internal loopbacks to an external peer after routing policy simplification. A private MPLS backbone exports internal loopbacks to an external peer after routing policy simplification. L3VPN segmentation depends on controlled per-VRF route distribution and route-target policy, but unrestricted BGP route acceptance or advertisement can redirect or expose critical internal prefixes.

C:

Campus topology should match segmentation, scale, operations and resiliency requirements rather than a fixed diagram, whereas unrestricted BGP route acceptance or advertisement can redirect or expose critical internal prefixes.

D:

Component duplication alone does not eliminate common physical and provider failure domains, while unrestricted BGP route acceptance or advertisement can redirect or expose critical internal prefixes.

Question 787

An imaginary enterprise networking change reveals: A cloud operator creates a new tenant VRF but fails to associate its EVPN routes with the correct L3 service context. What recurring review control BEST prevents this class of issue?

  1. Update oversubscription models as workloads and rack populations change.
  2. Retest transport loss and congestion after introducing RoCE or changing switch firmware.
  3. Validate route-target and VNI inventories before new tenant activation.
  4. Require predeployment simulation and drift reviews for fabric automation.

Explanation

Correct Answer

C:

Overlay tenant isolation requires consistent VNI, route-target and virtual-routing context mapping. Correct supported EVPN VXLAN mapping and verify VTEP policy across affected fabric nodes. Tenant test packets reach only intended segments and forbidden cross-tenant paths remain blocked. A cloud operator creates a new tenant VRF but fails to associate its EVPN routes with the correct L3 service context.

Incorrect Answers

A:

An imaginary enterprise networking change reveals: A cloud operator creates a new tenant VRF but fails to associate its EVPN routes with the correct L3 service context. A cloud operator creates a new tenant VRF but fails to associate its EVPN routes with the correct L3 service context. Port line rates alone do not describe achievable concurrent fabric capacity under oversubscription, whereas overlay tenant isolation requires consistent VNI, route-target and virtual-routing context mapping.

B:

A cloud operator creates a new tenant VRF but fails to associate its EVPN routes with the correct L3 service context. RDMA-based Ethernet storage may require supported congestion management and low-loss fabric settings to avoid severe performance loss, while overlay tenant isolation requires consistent VNI, route-target and virtual-routing context mapping.

D:

Controller-driven fabrics can drift if manual device state conflicts with the authoritative design model, but overlay tenant isolation requires consistent VNI, route-target and virtual-routing context mapping.

Question 788

An imaginary enterprise networking change reveals: A WAN hub accepts every learned route from a third-party carrier and accidentally selects an invalid default for production. What recurring review control BEST prevents this class of issue?

  1. Reassess PE service requirements whenever introducing new VPN or subscriber capabilities.
  2. Review segment policies after IGP topology and service changes.
  3. Keep a stakeholder-approved access matrix aligned with product selection.
  4. Review policy differences before every external neighbor activation.

Explanation

Correct Answer

D:

Unrestricted BGP route acceptance or advertisement can redirect or expose critical internal prefixes. Implement explicit inbound and outbound BGP policy with approved prefix, next-hop and route-preference criteria. External peering tests show only intended routes are accepted and announced under failure scenarios. A WAN hub accepts every learned route from a third-party carrier and accidentally selects an invalid default for production.

Incorrect Answers

A:

A WAN hub accepts every learned route from a third-party carrier and accidentally selects an invalid default for production. Access, provider edge and core router roles have distinct scale, control and service responsibilities, while unrestricted BGP route acceptance or advertisement can redirect or expose critical internal prefixes.

B:

SRv6 policy intent must be compatible with valid segments and underlay routing to actually steer traffic, but unrestricted BGP route acceptance or advertisement can redirect or expose critical internal prefixes.

C:

A WAN hub accepts every learned route from a third-party carrier and accidentally selects an invalid default for production. Port counts cannot determine the required policy architecture when access depends on user and device identity, whereas unrestricted BGP route acceptance or advertisement can redirect or expose critical internal prefixes.

Question 789

A customer proof-of-concept scenario describes: A small campus merges two routed segments but a manually configured OSPF area differs across the link. How should the team verify that the customer requirement is satisfied?

  1. The intended adjacency reaches full state and authorized prefixes appear in the route table.
  2. Large and small test transfers complete without unexplained drops or repeated path MTU exceptions.
  3. Neighbor entries converge on the active device MAC and bidirectional traffic resumes without permanent static mappings.
  4. New clients obtain correct scoped addresses, gateway and DNS parameters without cross-VLAN lease leakage.

Explanation

Correct Answer

A:

A small campus merges two routed segments but a manually configured OSPF area differs across the link. OSPF neighbors on a link must have compatible area and selected protocol parameters before exchanging routes. Correct the routed interface OSPF area and verify essential hello and authentication settings.

Incorrect Answers

B:

Packets larger than a path can carry may be dropped if fragmentation or discovery signaling is mishandled, but OSPF neighbors on a link must have compatible area and selected protocol parameters before exchanging routes.

C:

A small campus merges two routed segments but a manually configured OSPF area differs across the link. An outdated IPv4 neighbor entry can direct frames to a MAC that no longer owns the destination IP, whereas OSPF neighbors on a link must have compatible area and selected protocol parameters before exchanging routes. Neighbor entries converge on the active device MAC and bidirectional traffic resumes without permanent static mappings.

D:

DHCP broadcast discovery does not inherently cross routers without a relay or local DHCP service, while OSPF neighbors on a link must have compatible area and selected protocol parameters before exchanging routes.

Question 790

A fictional pre-sales network assessment observes: A remote engineering office routes public SaaS data to a central site although local approved security access is available. What prioritized technical adjustment should the presales plan include?

  1. Constrain regulated applications to approved central hubs or equivalent verified inspection paths.
  2. Evaluate supported local breakout with explicit DNS, NAT, inspection and enterprise security controls.
  3. Apply supported Huawei SD-WAN quality-based steering to measured loss, latency and jitter targets.
  4. Configure approved dynamic NAT or source translation for each intended internet access path.

Explanation

Correct Answer

B:

A remote engineering office routes public SaaS data to a central site although local approved security access is available. Unnecessary centralized internet egress may increase latency and consume costly WAN bandwidth. Internet egress location is a security-and-performance design choice, not only a routing shortcut. SaaS performance improves while approved logging and security controls remain effective at the branch.

Incorrect Answers

A:

Local breakout is inappropriate where business policy requires traffic to traverse centralized enforcement, whereas unnecessary centralized internet egress may increase latency and consume costly WAN bandwidth.

C:

A remote engineering office routes public SaaS data to a central site although local approved security access is available. Fixed link preference can violate application experience when real link quality changes, while unnecessary centralized internet egress may increase latency and consume costly WAN bandwidth.

D:

A remote engineering office routes public SaaS data to a central site although local approved security access is available. Internet egress often requires NAT and correct policy binding to the active underlay interface, but unnecessary centralized internet egress may increase latency and consume costly WAN bandwidth.

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU (H19-301) Practice Tests